ADDITION / ALTERATION TO BUILDING NO. P-571/3 P-645 P-646 AND P-647 AT AFS UNDER GE (AF) JORHAT.

Amount

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all as per architectural drawings complete all as specified and directed.

S & F 12 mm thick Prelaminated particle board interior grade, prelaminated both sides with decorative choice laminates and fixed to aluminium framework as in partition etc. including necessary fitting complete all as specified and directed.

M & L for 4.8 mm thick tinted glass ordinary quality and glazing with rubber gasket in square exc 0.5 Sqm in each pane of door window complete all as specified and directed.

M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F MS Steel work in tubular trusses, posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161- 1979 grade St.-240 complete all as specified and directed.

S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.

S&F Mild steel bolts 20 mm thick of neck purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm longcomplete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,ridge,facia etc.complete fixed with self tapping screw complete all as specified and as directed.

M&L for Applying two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces of any description exc. 10 cm in width or girth complete all as specified and directed .

Demolition of unreinforced concrete as in roof treatment including removal of existing roof treatment removing all rubbish off the premises as per the direction cleaning throughly washed with water to remove dust etc complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate )for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as for padding including mixing with WPC @ 3% complete all as specified and directed. Note : WPC shall be measured and paid separately under relevant item here-in-before.

Supply only integral water proofing compound confirming to IS-2645 and as approved complete all as specified and directed.

M&L for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment: (a) Apply bitumenus primer @ 1.20 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (b) Apply 3mm thick APP plastomeric bitumen based mineral finished water proofing membrane polyster reinforced (4kg/sqm) with 10 cm over laps at joints and laid with LPG torch over lap sealed and finished neat including surface preparation before and after application of treatment as per manufactures instruction complete all as specified and as directed. (c) The Finished surface be given bituminous based aluminium paint as per manufacturer's instructions complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in holdfast including use and necessary formwork complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc. 4.0 sqm each complete all as specified and directed.

-Ditto- all as per Srl item No. 17 here-in-before but n exc 1.5 Sqm each complete all as specified and directed.

S&F 2nd class hard wood plain ,solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepare to received glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (b) and fited to wooden chowkhat, complete all as per specified and directed.

S&F 2nd class hard wood 30 mm thick glazed and skelton shutters oen rebated and prepare to received glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (b) and fited to wooden chowkhat, complete all as per specified and directed.

S&F 2nd class hard wood 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete as in tubular post complete all as specified and directed.

M&L for Chequered cement concrete colour tiles 200 x 200 x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) as in path complete all as specified and directed.

S & F in repair 10 litres capacity PVC low level syphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed.

S & F in repairs Vitreous China Wash Hand Basin size 550 x 400mm (flat back or angle back type) white with 32mm dia brass chromium plated waste fitting, galvanised iron 'Light Grade' 32 mm bore waste pipe, a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends, making good distrurbed surfaces in cement mortar 1:3 complete all as specified and as approved.

S & F Vitreous China Squatting Pan ‘ORISSA’ Pattern of size 580X440 mm White, with 'P' or 'S' Trap integral Foot rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime concrete bedding, complete all as specified and as approved. Make : -Cat part No :C0117 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 70gms) complete all specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks,of stainless steel wire staples, complete all as specified and directed.

S&F 15 mm dia steel water tubing, Galvanised, "Medium Grade" with all fittings, fixed to walls, ceiling or laid in floors including taking up or down unserviceable steel water tubing with fitting and connections complete all as specified and directed.

S&F in repair 15mm bore (dia) Bib Tap, CP fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

M&L for Applying one coat of distemper oil emulsion (oil bound washable distemper) after preparation old distempered surface of wall by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed.

M&L for Applying one coat of distemper oil emulsion (oil bound washable distemper) after preparation old distempered surface of ceiling by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed.

M&L for Complete removal of existing treatment of old treated wall surface and applying two coats of acrylic emulsion anti-fungal paint (CAMOUFLAGE PATTERN) over and including a coat of primer complete all as specified and directed.

M & L for Applying one coat of synthetic enamel paint after preparation of old painted wood and wood based surfaces of any description not otherwise described over 10cm width or girth and complete all as specified and directed.

M&L for Applying one coat of synthetic enamel paint on old steel surfaces over 10cm width or girth not otherwise described after preparation of old steel surfaces complete all as specified and directed .

M&L for Applying one coat of synthetic enamel paint on old steel surfaces not exc.10cm width or girth after preparation of old steel surfaces complete all as specified and directed .

Demolition of Brick work built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks (with old size first quality) straight or curved on plan exc 6m mean radius built in cement motar 1:6 complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene (HDPE) water storage tank (cylindrical vertical with closed top) (ISI marked) three layer hoisted and fixed in position with float valve all as specified in SSR part-I complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene(HDPE) water storage tank (cylindrical vertical with closed top) (ISI marked) three layer hoisted and fixed in position with float valve all as specified in SSR part-I complete all as specified and directed.

S&F 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 20 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 25 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm dia GI water tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm dia GI water tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25 mm dia GI water tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F water tank cover with hinges etc. for 500 ltrs capacity complete all as specified and directed.

S&F water tank cover with hinges etc. for 1000 ltrs capacity complete all as specified and directed.

S&F 15 mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all specified and directed.

Supply, installation testing and commissioning of split type unit wall mounted Air conditioner three star rated indoor and outdoor unit complete with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with ISEER 3 star rating of capacity 1.5 TR complete with copper tubing power cables insulating material all specified and directed. Make : Blue Star, Cat Part No. IC318YLTU or its equivalent model in Voltas, Samsung, LG as approved by GE.

Supply, installation and testing Voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250V with output voltage stabilzed at 230 V with accuracy of + 2.5% and of capacity 4.0 KVA complete all as specified and directed

Supply and drawing submain wiring with two runs of single core 4 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unsheathed conductor drawn into PVC casing and capping and all necessary fittings including 4 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete all as specified and directed. NOTE:- (i) Extra lenght of cables / wire required for connection to MCBs / DBs shall not be measured under this items. (ii) Three runs of cable 4 Sqmm shall be measured as one RM of sub main wiring.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240V AC complete all as specified and directed.

S & F Feather- kites special coated wall mounting stand suitable for 1.5 to 2.0 TR split AC outdoor unit consisting of bracket 2 Nos, L- angle - 02 Nos, M8 x 50mm anchor fastener 06 Nos complete all as specified and directed.

M & L for point wiring with 1.5 sqmm FRLS grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694 drawn through and including PVC cassing and capping (not less than 20 mm wide) complete with all acessories including PVC board/ box of suitable size for mounting of switches, sockets, regulators etc including 1.5 sq mm stranded copper conductor cable FRLS grade PVC insulated and unsheathed as earth continuity conductor for one light point controlled by one way switch complete by maintaining the colour code complete all as specified and directed.

-Ditto- all as per Ser item No. 64 here-in-before but for One ceiling / exhaust fan point controlled by one one way switch complete all as specified and directed.

-Ditto- all as per Ser item No. 64 here-in-before but for 5 amps socket point on independent board complete all as specified and directed.

-Ditto- all as per Ser item No. 64 here-in-before but with 2.5 sqmm cable for 15 amps socket outlet on independent board, using 2.5 sqmm earth continuity conductor complete all as specified and directed.

S&F Switch piano flush type, 6 Amps 240 volts single pole one way complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal with box complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5 Amps flush type complete all as specified and directed.

S&F Ceiling rose surface backelite three terminals, PVC / polycarbonate insulated body complete all as specified and directed.

S&F Surface mounting LED 2ft x2ft luminaire of capacity 36W with white powder coated CRCA housing with LEDs and full window acrylic diffuser etc.complete with all acessories internally prewired suitable for sigle phase 230volts 50Hz AC supply including connecting up with flexible copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified. Make -Crompton, Cat No.LCTLSNE-36-FO-CDL or its equivalent model in Philips/ Wipro as approved by GE.

S&F Ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make -Crompton, Cat No. Sea Breeze or its equivalent model in Havells / Usha as approved by GE.

M&L for submain wiring with two runs of single core 6 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unsheathed conductor drawn into PVC casing and capping and all necessary fittings including 6 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete all as specified and directed. NOTE:- (i) Extra length of cables / wire required for connection to MCBs / DBs shall not be measured under this items. (ii) Three runs of cable 6 Sqmm shall be measured as one RM of sub main wiring.

S&F TP&N DBs, double door, 415 volt, 4 way for MCBs SP with 200 Amps rated busbar complete all as specified and directed. MAKE:- Legrand Cat part No. 5076 70 or equivalent of make L&T/ Siemens as approved by GE.

S&F SP&N DBs, double door, 240 volt, 8 way for incorporating MCBs SP with 200 Amps rated busbar complete all as specified and directed. MAKE:- Legrand Cat part No. 5076 11 or equivalent of make L&T/ Siemens as approved by GE.

S&F MCB single pole, 240 volts, 32 Amps, 10 KA, C Curve complete all as specified and directed.

S&F MCB SP&N, 240 volts, 32 Amps, 10 KA, C Curve including connection, testing and commissioning complete all as specified and directed.

S&F MCB TP&N, 415 volts, 100 Amps, 10 KA, B Curve including connection, testing and commissioning complete all as specified and directed.

Excavation in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, and getting out in Soft / Loose Soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm. complete all as specified and directed.

Removing excavated materials not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point, complete all as specified and directed.

M & L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 25 sqmm 4 core, complete all as specified and directed.

M&L for Sand Cushioning (dry) in trenches for protection of UG Cables (below, above and around the UG Cable laid in trenches) of 230mm Spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed. (NOTE : For the purpose of payment, punning thickness of Sand cushioning shall only be measured and paid).

S&F Sub-Class 'B' brick, well burnt, laid breadth-wise along the length of Cable as in Trenches over Sand Cushion for UG Cable protection, complete all as specified and directed.

S&F Galvanised Iron Pipe 50mm Bore ‘Light grade’ for protection of UG Cable, laid in Floors/ Road Crossing, fixing to Pole with Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and as directed.

satyabhama and co

A.PONGSHI PHOM

M/S FRONTIER CONSORTIUM

Bidder Name

S.N.Lahoty

satyabhama and co

A.PONGSHI PHOM

M/S FRONTIER CONSORTIUM