KNMT 2024-2025

Amount

Earth work excavation for foundation in all soils and except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation layer of 15cm thick watering,ramming deposit in the surplus earth in the premises as directed by department officers etc..,complete as per SS 20B TNDSS No:23 & 24VI(s2),VII 9,10-1 m3 for foundation.

Supplying and filling in foundation and basement with filling M-sand in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed

Plain cement concrete Using 1:4:8 mix (one cement,four crushed stone sand and eight aggregates)using 40 mm ISS HBG metal including cost conveninence of all materials to work site and all labour charges for mixing,laying,consoldating and curing etc complete as per the standard specifications. TNDSS NO :28 V,VI(S2) V,Vi(S5A)VII.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for

Supplying and ertecting centering to sides and sofits including supports and strutting with necessary cross basing for plain surface such as RCC slabs rectangulars beams all beams lintgel etc..,centering for sofits up to 3 meter height using mild streel sheet of size 90 cm x60cmx 10mm gauge with MS angles of size 25mm x 25mmx3mm laid over silver oak (CW) joists of sizes 10 cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO :30 &86(for square beam ).Footing

Column

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - Basement

Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks of size (8 3/4"x4 1/4"x 2 3/4") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C- 10m3

Plastering in Cement mortar 1:5 (one cement Five crushed stone sand)using 12 mm thick including cost of conveyance of materials and labours charges etc.., complete as per standard specifications (MoRTH Specification :Clause :1000/1300)

Painting two coats with ready mixed plastic emulsion paint S.I.358 plastic emulsion paint of approved quality and colour over a priming coat,including through scrapping,clean removal of dirt,etc and complete and including necessary plaster of pairs of,putty,wherever required including cost snd conveyance of all materials and all labours charges etc..,complete as per standard specification and as directed by the department officers.TNBP No:66-A(SI.NO;358).

Supplying fabricating and placing in position of mild steel or TMT rods including cost of steel and binding,tying and placing in position etc..,Complete as per SS.TNDSS NO.97 V,Vi(s6)VII(s6)VII-3.

Painting two coats of approved colour of best quality synthetic enamel paint,painting over new ironic work including cost snd conveyance of all materials and all labours charges etc..,complete as per standard specification and as directed by the department officers.(New iron surface).TNBP NO:66&66-A

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Providing and fixing of chain link 2"x2" using 10gauge galvanaised iron work as per standard specification. Supplying and fixing of 20 mtr cabasity tilting type stainlesssteel garbage bins in park area as per the tustbin

Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification (5units / park)(PWD SOR Page (153 TO 157)CCTV Camera (Q)

Network Video Recorder (PWD SOR PG.NO :154)

Hard disc for NVR 4TB (PWD SOR PG.NO :155)

24 Port Patch Panel (PWD SOR PG.NO :156)

Rack With Accesssories -4U (PWD SOR PG.NO :155)

Armoured LAN & CCTV Cable (CAT-6) (PWD SOR PG.NO 153)

supply and Fixing of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length etc complete

supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . SD -446

Earthing as per PWD standard specification with on earth electrode of 2m class 'B' pipe of dia not less than 32mm complete. Brass cable event for suitable armoured LTUG cable with earth connection suitable of 4 X 16sqmm etc complete

Supply and Eraction of 4X6 sqr mm UG Copper Cable, including cost and conveyance of all meterial two side and Labour Charges etc, completed

Supply and Eraction of 2 X 10 sqr mm UG Copper Cable, including cost and conveyance of all meterial two side and Labour Charges etc, completed

Supplyandfixingofhorizontaltype4waytriplepoleneutralMCBdistributionboardinsheetsteelenclosuredoubledoor(metal)with40A4poleMCBisolaterasincomingand12Nos.6Ato32ASPMCBasoutgoinginflushwithwallandmakinggoodoftheconcealedportionwithearthconnection.TheMCBDBandMCB'sshouldbewiththeISImark(like standard make) SD -157

SIGRUN VERTRAG PROJECTS (BID ID -1162910)