HEX HEAD SCREW M16X45

1. The Purchaser reserves the right to place an order for either the entire quantity or the bulk quantity (minimum 80% of the net procurable quantity) on RDSOapproved vendors, as reflected in U- VAM as on the date of tender closing, for SubItem ID 3100249002 under Item ID 3100249, in terms of Clause 3.3 of Section II of the Central Railway Bid Document (updated January 2024). Developmental vendors listed in the RDSO Vendor Directory as reflected in UVAM for Sub- Item ID 3100249002 under Item ID 3100249, as on the date of tender closing, may be considered for developmental orders up to 20% of the net procurable quantity. Developmental vendors shall be eligible for consideration only if they hold unconditional approval status in U-VAM as on the date of tender closing. Developmental vendors reflected in the RDSO Vendor Directory with conditional approval/General Remarks (e.g., field trials, prototype approval, limited or temporary approval etc.) shall not be eligible for order placement. The status of the vendor (i.e. approved or developmental vendor) shall be reckoned as available in U-VAM on the date of tender closing date and not thereafter. However, cases of downgrading/removal/suspension/banning etc., after closing date of tender, shall be taken into account while considering the offers. Note: If the works address indicated in an offer is different from what is indicated in the approval certificate issued by the respective vendor approving agency or appearing in Vendor Directory reflected on U-VAM, then such offer will be treated as if the same has been received from an unapproved source. 2. Where there are not more than three Indian suppliers categorized as Approved Vendor for a particular item, developmental vendors can be considered for placement of bulk order without any quantity restrictions. However, while considering such vendors, factors including past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. shall be considered in a transparent manner, subject to rates being reasonable. In such cases, the purchaser reserves the right to split the order quantity between one or more firms and Para 25.2 of Instruction to tenderers and General Conditions of tenders for supply contract [for indigenous tenders] shall be applicable. Such orders shall be treated as bulk orders. Indian Supplier shall be defined as follows: A supplier or bidder shall be considered to be from India if (i) the entity is incorporated in India, or ii) a majority of its shareholding or effective control of the entity is exercised from India, or iii) more than 50 Percent of the value of the item being supplied has been added in India.

3. The firms/tenderers who are not appearing in U-VAM as Approved/Developmental Vendors of nominated vendor/source approving agencies will not be considered for ordering. However, such firms willing to participate, are advised to approach the concerned Vendor Approving agency for getting their name registered as approved/ developmental vendor in the vendor directory maintained in U-VAM. 4. In keeping with the Public Procurement (Preference to Make in India) Order 2017, latest revision, it has been found that there exists sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to " Class I local suppliers " only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

The bidder confirms that rates and other financial terms quoted In relevant columns of financial bid will only be ruling terms for Acceptance, and such terms quoted anywhere else should be Ignored. The bidder agrees to supply the tendered stores at the Rates quoted by him in accordance with the IRS conditions of Contract and [or] special conditions and [or] other conditions Specified/attached with the tender

By default offer shall be considered as valid for 60 days from the date of tender opening. Also, the delivery period shall be reckoned from the date of issue of advance PO/Letter of Advance Acceptance/Letter of Acceptance. This is a mandatory requirement and no deviations to this will be permitted or considered while consideration of the offer. Bidders not willing to accept this condition must not submit the offer. Bids if submitted shall be considered as deemed acceptance of this condition. Any deviation regarding this or remarks for not agreeing to this condition, offered in the deviation column or anywhere including in uploaded document will not be accepted or considered while consideration of the offer. The purchaser may, at his discretion ignore any such deviation, if quoted, while issuing the contract. No further claim by the bidder shall be admissible in such cases

Whenever tender is floated with purchase restriction from sources approved by nominated authorities and there exists a suspected cartel situation by approved sources or the rates available from approved source/sources are adjudged unreasonably high, despite fair efforts as permissible, the purchaser reserves the right to place orders on firms outside the approved vendor list, without any restrictions

In case where firm has failed to supply material within DP, General Damages equal to 5% of the PO/Contract value will be applicable in cases where performance guarantee is not applicable and not submitted by firm. In cases where a firm has submitted a performance guarantee, then the same will be forfeited

For purchase related queries contact For purchase related queries contact (PPC 7400086068) , for material delivery related queries (STOCK 9920964601) (NON STOCK 8888119959) (CONSIGNEE 9860018958 )

Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance and such terms quoted anywhere else will be ignored.[Denial of this condition not recommended].

Freight to be paid by firm upto destination invariably