Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹42.6 L+₹29,163 (0.69%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹48.2 L+₹5.9 L (13.9%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L3 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹50.0 L
EMD Value
₹99,800
Closing Date
27 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS Rajouri
REPAIR REPLACEMENT OF ALUMINIUM DOORS, PARTITIONS, WOODEN DOORS, WINDOWS, VENTILATORS ETC UNDER AOR OF AGE BR DETT-III OF GE 862 EWS
2024_MES_651364_1
GER-10/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS Rajouri
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹99,800
Yes
19 Jun 2024
27 Apr 2024
29 May 2024
27 Apr 2024
27 May 2024
13 May 2024
29 Apr 2024 - 11 May 2024
Amount
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.
Taking down shutter of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm, complete all as specified and directed.
S&F for pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-0 using 12.5mm graded stone agregate, complete all as specified and directed.
S&F for pressed steel frame for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock and strike plate etc including back filling of chowkhats with PCC 1:3:6 type C-0 using 12.5mm graded stone agregate, complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F for factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed
S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed.
M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and directed.
S&F for factory made solid panel PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2020, complete all as specified and directed.
S&F for aluminium anodised, powder coated (minimum thickness of power coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium door shutters, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM /neoprene gasket required (fittings shall be paid for separately) with extruded built up standart tubular section /appropriate Z-sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed.
S&F for Powder coated anodised aluminium window and ventilator shutters of any colour, (minimum thickness of powder coating not less than 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no), complete all as specified and directed
S&F for Powder coated aluminum anodized three track slinding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle lock, etc including 65 X 39.5 X 1.5 mm section for complete frame and rubber beading and glazing clips etc including taking down existing old window of any description complete as specified and directed by Engr-in-Charge. (Note :- Minimum thickness of powder coating not less than 50 micron).
S&F for aluminium anodized grills 10.00mm dia decorative type 75mm mesh size, complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including one shop coat of red oxide pimer over window frame and guard bars complete all as specified and directed.
S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum door windows & parition n exc 0.5 sqm in each pane, complete all as specified and directed.
S& F for galvinsed mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with galvanised wire staples, complete all as specified and directed.
S& F in repair for galvinsed mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with galvanised wire staples, complete all as specified and directed.
S&F 100mm long butt hinges stainless steel, medium weight (ISI Marked) , complete all as specified and directed.
S&F in repair for door closer hydraulically regulated, aluminium (extruded section body) designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg (ISI Marked), complete all as specified and directed.
S&F for extruded aluminium alloy handles size 200 mm fabricated type anodised (ISI marked), complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choce fixed to aluminium door or similar work, complete all as specified and directed.
S&F for plain ACP board 5mm thick, fixed in aluminium door or similar works joinery including cutting, packing, finishing, complete all as specified and directed.
M&L in repair for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe310-0, complete all as specified and directed.
S&F for 75 mm size mortice lock of brass, vertical type, 4 levers, complete all as specified and directed.
S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, (ISI marked), complete all as specified and directed.
S&F for 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type), and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy (ISI Marked), complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, complete all as specified.
S&F for 3 mm thick figured glass pin headed type and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete after hacking out old broken glass all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.
M&L for preparation new of previously untreated steel or iron surface or roof sheet or windows of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer, complete all as specified and directed.
M&L for preparation old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L in repair for 18 / 19mm thick prelaminated particle board, cupboard, kitchen cabinat shutter etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed.
S&F in repair for stainless steel curtain rod 20mm dia, complete all as specified and directed.
S&F in repair for stainless steel 'T' and 'L' type brackets with finials for curtain rod of 20mm dia, complete all as specified and directed.
M&L in repair for door bottom sealing strip guard with double sided insulation for doors, which are equally able to keep wind, dust and sound or poluted air out side of door (i.e. Anti Lizard strip) fixed to aluminium or panel door, complete all as specified and directed.
M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles and removing rubbish off the premises, complete all as specified and directed.
All as per srl item No 40 here-in-before but as in patches n. exc 1 Sqm area.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles and removing rubbish off the premises, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, after dismantling old unserviceable of tiles and removing rubbish off the premises, complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
Description all as per srl item No. 46 above but except bricks NOTE: Old brick retrieved from demolition shall be used.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick or concrete work, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening, complete all as specified and directed.
M&L for rendering 20 mm thick in cement mortar 1:4 on fair faces of brick or concrete work/ stone wall, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over 1mm thick putty, complete all as specified and directed.
S&F in repair for assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6 mm squre support pipes, dedicated holes for spoon, pegs etc cover all size 900mmx750mmx250mm of standard pattern, complete all as specified and directed.
S&F in repair for glass corner self with tempered glass, stainless steel brackets and polished chrome finish rail , complete all as specified and directed by Engr-in-Charge.
S&F in repair for sheet glass shelf assembly consisting 5.5 mm thick, sheet glass shelf 12cm wide with chromium plated bracket guard and rainling 60cm long, complete all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc, complete all as specified and directed.
Taking out shutters of size not exc 2.00 Sqm each and refixing in the same opening after carry out necessary repair required, complete all as specified and directed.
Taking out aluminium door, window frame size exc 2.00 Sqm each and refixing in the same opening after carry out any repair required, complete all as specified and directed.
M&L for PVC wall panelling of approved shade and colour, UPVC hollow sections 9-10mm thick & 1mm thick wall thickness printed / designer, joined together with groove and tennon joints and fixed with screws on walls, finishing sides and top with 'U' or 'T' or any other suitable PVC section matching the shade of panels including preparation of wall surface if required including dismantling old PVC wall panelling, complete all as specified and directed.
M&L in repair 2nd class hard wood as in scantling (clean sawn) 40 sqcm and over in section, complete all as specified and directed.
M&L in repair for 4mm thick Veneered decoraatlve plywood, Grade -1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in any shap, size and design, complete all as specified and directed.
M&L applying two coat of staining and varnish on new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.
KANWAL KUMAR GUPTA
NATIONAL TRADING COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .