Tender ID

Karnataka

Active

Works

Electrical

Providing New Electric wirring including complete wirring for Solar Electric Supply in Zilla panchayat office Karwar

Rural Development and Panchayat Raj Department

RDPR Division Office Karwar | Uttara Kannada, Karnataka

Amount: ₹18.6 LCloses: 17 Nov 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published6 Nov 2026
Closes17 Nov 2026

Corrigenda

Corrigendum

1 updatesLatest on 12 Nov 2026

Tender Value

₹18.6 L

EMD Value

₹50,000

Closing Date

17 Nov 2026, 4:30 pm3d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

SEEMA

Mobile Number

Work Description

Providing New Electric wiring including complete wiring for Solar Electric Supply in Zilla panchayat office Karwar

Tender Information

Tender ID

RDPR/2026-27/EL/WORK_INDENT30439

Reference Number

RDPR/2026-27/EL/WORK_INDENT30439

Tender Type

Open

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Karwar

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredACCURATE POSTAL ADDRESS AND PHONE NUMBER AND EMAIL ADDRESS

RequiredVALID ELECTRICAL LICENCE

RequiredGST REGISTRATION CERTIFICATE

RequiredPAN REGISTRATION CERTIFICATE

RequiredSIMILAR NATURE OF WORKDONE CERTIFICATE

RequiredANNUAL TURN OVER CERTIFICATE OF LAST 5 YEARS ISSUED BY CA 2021-22 TO 2025-26

RequiredLINE OF CREDIT FROM ANY NATIONALIZED/SCHEDULED BANK

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

THE TENDERER SHOULD POSSESS VALID ELECTRICAL LICENCE (Class III and above)

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

MANDATING SATISFACTORY COMPLETION AS A PRIME CONTRACTOR FOR AT LEAST ONE SIMILAR NATURE WORK SUCH AS ELECTRICAL WIRING TO AN EXTENT OF 50% OF THE COST OF THE WORK, RS. 9.31 LAKHS IN LAST 5 YEARS (2021-22 to 2025-26).The bidder shall submit a Work Completion Certificate issued by an officer not below the rank of Executive Engineer of the concerned Government Department or Institution as proof of such experience.

THE TENDERER SHALL SUBMIT THE TURNOVER CERTIFICATE ISSUED BY AUTHORISED CA AND MUST HAVE ACHIEVED IN AT LEAST TWO FINANCIAL YEARS A MINIMUM FINANCIAL TURN OVER OF RS.18,61,000 IN ANY OF THE LAST FIVE YEARS (2021-22 to 2025-26) USUALLY NOT LESS THAN THE AMOUNT PUT TO TENDER UNDER THIS CONTRACT

FOR DETAILS REFER TENDER NOTIFICATION AND CONDITIONS IN THE BID DOCUMENTS.

ACCEPTANCE / CANCELLATION OF THE WORKS ARE RESERVED BY EXECUTIVE ENGINEER PRED KARWAR WITHOUT ANY REASONS FOR THE SAME.

CORRIGENDUMS / MODIFICATIONS / CORRECTION, IF ANY, WILL BE PUBLISHED IN THE WEBSITE ONLY.

ALL THE SCANNED DOCUMENTS PERTAINING TO BIDDER TO BE UPLOADED SHALL BE IN ORIGINAL AND SAME ORIGINALS SHOULD BE PRODUCED TO THE EXECUTIVE ENGINEER (AT THE TIME OF TECHNICAL BID OPENING) WHO RESERVES RIGHT TO VERIFY THE ORIGINAL DOCUMENTS BEFORE APPROVAL.

TO QUALIFY FOR AWARD OF THIS CONTRACT EACH TENDERER SHOULD GIVE ALL DETAILS AND DOCUMENTS AS PER TECHNICAL AND FINANCIAL BID ATTACHED TO THIS TENDER.

IF ANY DATE IN THE TENDER TIME TABLE IS GOVERNMENT HOLIDAY, NEXT WORKING DATE WILL BE CONSIDERED

INCOMPLETE / CONDITIONAL TENDERS WILL NOT BE ACCEPTED.

TENDERER MUST SUBMIT HIS PRESENT ACCURATE POSTAL ADDRESS AND PHONE / CELL PHONE NUMBER

THE TENDER MAY BE CANCELLED AT ANY STAGE WITHOUT ASSIGNING ANY REASON

THE TENDERERS MUST SUBMIT THE SCANNED DOCUMENTS IN PDF / JPEG FORM, NOT IN OTHER FORM.

ANY OBJECTION REGARDING THE TENDER MUST BE SUBMITTED DIRECTLY TO EXECUTIVE ENGINEER , NOT IN INWARD.

FOR INTERPRETATIONS OF CLAUSES, CONDITIONS, SPELLING MISTAKES, ETC., DECISION OF EXECUTIVE ENGINEER PRED KARWAR IS FINAL.

GST SHALL PAID SEPARATELY AS PER THE PREVAILING RATES

ALL OTHER CONDITIONS AS PER KW TENDER DOCUMENT

GST AND PAN REGISTRATION DOCUMENT SHALL BE SUBMITTED BY THE SUPPLIER.

TENDERER MUST HAVE ASSESSED AVAILABLE TENDER CAPACITY OF 18.62 LAKHS OR MORE WHICH WILL BE CALCULATED AS PER FORMULA IN SECTION 3.1

UNCONDITIONAL LIQUID ASSETS/BANK LINE OF CREDIT FROM ANY NATIONALIZED/SCHEDULED BANK MUST BE SUBMITTED AS PER KW BID DOCUMENT 30% of AMOUNT PUT TO TENDER i.e. 5.59LAKHS.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹50,000

Important Dates

Last Activity

6 Nov 2026

Published

6 Nov 2026

Download Ends

12 Nov 2026

BOQ Preview

•

Providing New Electric wirring including complete wirring for Solar Electric Supply in Zilla panchayat office Karwar

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 25 mm

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 30 mm

•

Supplying and wiring adopting loop system in existing PVC Conduit /casingcapping using 2x1.5 Sqmm (Phase&Neutral) &1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS...

•

Wiring for lighting/power circuit using one of FRLSPVC insulated 1100 V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

upplying and flush mounting powder coated / galvanized metal boxe suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 3...

•

supplying and flush mounting powder coated / galvanized metal boxe suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with requirednos. Of machine screws, boltsnutsetc., complete on the existing meta...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Switch.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.

•

Supplying & fixing of Porcelain fuse channel withcut out on existing wooden/panel using necessary nuts, bolts and washers. 200 A

•

Supplying&fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energycross-3 withShort circuitbreaking capacity ...

•

Supplying and fixing regular MCB distribution boards on wall/ wood board/ flush mounting using required clamps, bolts, nut setc., with provision for fixing suitable type capacity MCB's single phase/ 3...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450Vupto 300m A sensitivity on existing wood/panel board.

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 25 mm

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 30 mm

•

Supplying and flush mounting powder coated / galvanized metal boxe suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder

•

Supplying & fixing of Porcelain fuse channel withcut out on existing wooden/panel using necessary nuts, bolts and washers. 200 A

•

Supplying and fixing regular MCB distribution boards on wall/ood board/flush mounting using required clamps, bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 phase...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450Vupto 300m A sensitivity on existing wood/panel board. 63 A 2 pole

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operationon230V, 50cycles. Single phaseACsupplyconforming to ISS-374-1979 and with double ball bearing sy...

•

Supplying fixing retrofit type-PL-LEDLamp ...W LED linear source with CCT 6500 degree K, CRI 70. efficacy 80 lumen perW, life25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM80. The...

•

Supply of round square recesssurface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated fromdiecast aluminium withwhite powder coated prewired to mains connector & has swivellin...

•

Fixing all type sandall capacities of fluorescent /falseceiling/spotlight /CFL/LED fittings indoor on the wall/ ceiling /rafters/girders using 23/0.0076" twin twisted PVC insulated wires, required Nos...

•

Fixing a ceiling/wall mounting fan of all capacities and all types, with necessary clamp sand'S' hook made out of 15 mm dia MS rod, with 5A. ceiling rose of approved qualitywith necessary length of 23...

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 25 mm

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required. 30 mm

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Batten Holder

•

Supplying & fixing of Porcelain fuse channel withcut out on existing wooden/panel using necessary nuts, bolts and washers. 200 A

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450Vupto 300m A sensitivity on existing wood/panel board. 63 A 2 pole

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-1.pdf

Tender Document • 0.60 MB

Corrigendum Documents

ADDENDUM 30439 final.pdf

pdf • 0.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Active

Works

Electrical

Providing New Electric wirring including complete wirring for Solar Electric Supply in Zilla panchayat office Karwar

Rural Development and Panchayat Raj Department

RDPR Division Office Karwar | Uttara Kannada, Karnataka

Amount: ₹18.6 LCloses: 17 Nov 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published6 Nov 2026
Closes17 Nov 2026