Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-AOC 691 INDUSTRIAL AREA PHASE II CHANDIGARH 160 002 | CHANDIGARH | CHANDIGARH | CHANDIGARH | 160002 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹15.7 L+₹10,407 (0.67%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹16.0 L+₹36,632 (2.35%)Rejected-Finance H NO 33 VPO KHERI SALABAT PUR DISTT RUPNAGAR PUNJAB 140111 | RUPNAGAR | RUPNAGAR | PUNJAB | 140111 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹19.7 L+₹4.1 L (26.6%)Rejected-Finance SECTOR 10 PANCHKULA | PANCHKULA | PANCHKULA | HARYANA | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹19.7 L+₹4.2 L (26.7%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | PARTAP ENGINEERING WORKS L1 | SANJEEV ENTERPRISES L2 | M/s Friends Engineering Works L4 | GOODWILL ENGINEERS L5 | LA ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of bore 15 mm complete all as specified and directed.
Note: (i) Pipe lines shall be dismantled and taking down from floor/ wall/roof of multistorey buildings and rate of arrangement (ladder/scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, size, material, Qty, location and route of old unserviceable pipe line may or may not be different from new pipe line as per site requirement. (iii) Most of pipe lines are fixed concealed on wall and laid under the building and not possible to taking out therefore credit shall be issued as per actual availability from site. | 200 | Running Metre | 5 ₹1,000 Lowest | 5 ₹1,000 Lowest | 35 ₹7,000 | 15 ₹3,000 | 5 ₹1,000 Lowest |
| 2.00 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of bore 20 mm complete all as specified and directed.
Note: (i) Pipe lines shall be dismantled and taking down from floor/wall/roof of multistorey buildings and rate of arrangement (ladder/Scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, size, material, Qty, location and route of old unserviceable pipe line may or may not be different from new pipe line as per site requirement. (iii) Most of pipe lines are fixed concealed on wall and laid under the building and not possible to taking out therefore credit shall be issued as per actual availability from site. | 600 | Running Metre | 10 ₹6,000 | 5 ₹3,000 Lowest | 35 ₹21,000 | 20 ₹12,000 | 5 ₹3,000 Lowest |
| 3.00 | Supply, laying and fixing of pipe galvanized, “medium class” of 15 mm bore on floor/wall/ceiling/roof of multistorey building (horizontally and vertically) , including GI fittings complete all as specified and directed.
Note: (i) Pipe lines shall be fixed on multistorey buildings and rate of arrangement (ladder/Scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, Material, Qty, Location and route of pipe line may or may not be different as per site requirement and as per direction of Engr-in-Charge. (iii) Rate of fittings such as elbow, nipple, socket, Tee, etc are incl in Quoted rates (iv) Rate of union and valves shall be measured and paid for separately. | 500 | Running Metre | 110 ₹55,000 Lowest | 155 ₹77,500 | 230 ₹1,15,000 | 180 ₹90,000 | 135 ₹67,500 |
| 4.00 | Supply, laying and fixing of pipe galvanized, “medium class” of 20 mm bore on floor/wall/ceiling/roof of multistorey building (horizontally and vertically) , including GI fittings complete all as specified and directed.
Note: (i) Pipe lines shall be fixed on multistorey buildings and rate of arrangement (ladder/scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, Material, Qty, Location and route of pipe line may or may not be different as per site requirement and as per direction of Engr-in-Charge. (iii) Rate of fittings such as elbow, nipple, socket, Tee, etc are incl in Quoted rates (iv) Rate of union and valves shall be measured and paid for separately. | 1,120 | Running Metre | 155 ₹1,73,600 Lowest | 220 ₹2,46,400 | 300 ₹3,36,000 | 205 ₹2,29,600 | 158 ₹1,76,960 |
| 5.00 | Supply, laying and fixing of unplasticized PVC pipes of pressure rating 10 kgf/sq. cm and 15 mm bore (Minimum) on floor/wall/ceiling/roof of multistorey building (horizontally and vertically) , including fittings complete all as specified and directed
Note: (i) Pipe lines shall be fixed on multistorey buildings and rate of arrangement (ladder/Scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, Material, Qty, Location and route of pipe line may or may not be different as per site requirement and as per direction of Engr-in-Charge. (iii) Rate of fittings such as elbow, nipple, socket, Tee, etc are incl in Quoted rates (iv) Rate of union and valves shall be measured and paid for separately. | 2,200 | Running Metre | 120 ₹2,64,000 | 95 ₹2,09,000 | 105 ₹2,31,000 | 148 ₹3,25,600 | 66 ₹1,45,200 Lowest |
| 6.00 | Dismantling and taking down old unserviceable gate valve any type any size complete all as specified and directed.
Note: Qty and martial of old items may be different from new items. | 260 | Each | 10 ₹2,600 | 2 ₹520 Lowest | 20 ₹5,200 | 30 ₹7,800 | 5 ₹1,300 |
| 7.00 | Supply and fixing for gun-metal, globe or gate valves suitable for GI pipe of size 15 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. | 60 | Each | 300 ₹18,000 Lowest | 340 ₹20,400 | 500 ₹30,000 | 360 ₹21,600 | 478 ₹28,680 |
| 8.00 | Supply and fixing for gun-metal, globe or gate valves suitable for GI pipe of size 20 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. | 100 | Each | 400 ₹40,000 Lowest | 415 ₹41,500 | 600 ₹60,000 | 450 ₹45,000 | 665 ₹66,500 |
| 9.00 | Supply and fixing for UPVC SCH 80 Ball valve or gate valves suitable for CPVC pipe of size 15 mm bore (minimum) complete all as specified and directed. | 140 | Each | 150 ₹21,000 | 155 ₹21,700 | 220 ₹30,800 | 295 ₹41,300 | 67 ₹9,380 Lowest |
| 10.00 | Supply and fixing in repair GI union suitable for GI pipe of size 15 mm bore complete all as specified and directed. | 40 | Each | 30 ₹1,200 Lowest | 31 ₹1,240 | 60 ₹2,400 | 75 ₹3,000 | 76 ₹3,040 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
29 Oct 2025, 6:00 pmClosed
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
REPAIR AND MAINT OF EXTERNAL WATER SUPPLY LINES, VALVES, PUMP SETS ALONGWITH CONNECTED ITEMS AT SECTOR 24, 37, 38, 42, 28, 29, 30 AT CHANDIGARH
2025_MES_733975_1
GE (I) R AND D/CHD-99/2025-26
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹40,000
Yes
22 Jan 2026
7 Oct 2025
31 Oct 2025
7 Oct 2025
29 Oct 2025
22 Oct 2025
Amount
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of bore 15 mm complete all as specified and directed. Note: (i) Pipe lines shall be dismantled and taking down from floor/ wall/roof of multistorey buildings and rate of arrangement (ladder/scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, size, material, Qty, location and route of old unserviceable pipe line may or may not be different from new pipe line as per site requirement. (iii) Most of pipe lines are fixed concealed on wall and laid under the building and not possible to taking out therefore credit shall be issued as per actual availability from site.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of bore 20 mm complete all as specified and directed. Note: (i) Pipe lines shall be dismantled and taking down from floor/wall/roof of multistorey buildings and rate of arrangement (ladder/Scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, size, material, Qty, location and route of old unserviceable pipe line may or may not be different from new pipe line as per site requirement. (iii) Most of pipe lines are fixed concealed on wall and laid under the building and not possible to taking out therefore credit shall be issued as per actual availability from site.
Supply, laying and fixing of pipe galvanized, “medium class” of 15 mm bore on floor/wall/ceiling/roof of multistorey building (horizontally and vertically) , including GI fittings complete all as specified and directed. Note: (i) Pipe lines shall be fixed on multistorey buildings and rate of arrangement (ladder/Scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, Material, Qty, Location and route of pipe line may or may not be different as per site requirement and as per direction of Engr-in-Charge. (iii) Rate of fittings such as elbow, nipple, socket, Tee, etc are incl in Quoted rates (iv) Rate of union and valves shall be measured and paid for separately.
Supply, laying and fixing of pipe galvanized, “medium class” of 20 mm bore on floor/wall/ceiling/roof of multistorey building (horizontally and vertically) , including GI fittings complete all as specified and directed. Note: (i) Pipe lines shall be fixed on multistorey buildings and rate of arrangement (ladder/scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, Material, Qty, Location and route of pipe line may or may not be different as per site requirement and as per direction of Engr-in-Charge. (iii) Rate of fittings such as elbow, nipple, socket, Tee, etc are incl in Quoted rates (iv) Rate of union and valves shall be measured and paid for separately.
Supply, laying and fixing of unplasticized PVC pipes of pressure rating 10 kgf/sq. cm and 15 mm bore (Minimum) on floor/wall/ceiling/roof of multistorey building (horizontally and vertically) , including fittings complete all as specified and directed Note: (i) Pipe lines shall be fixed on multistorey buildings and rate of arrangement (ladder/Scaffolding) for reaching at this height are deemed to be incl in quoted rates. (ii) Type, Material, Qty, Location and route of pipe line may or may not be different as per site requirement and as per direction of Engr-in-Charge. (iii) Rate of fittings such as elbow, nipple, socket, Tee, etc are incl in Quoted rates (iv) Rate of union and valves shall be measured and paid for separately.
Dismantling and taking down old unserviceable gate valve any type any size complete all as specified and directed. Note: Qty and martial of old items may be different from new items.
Supply and fixing for gun-metal, globe or gate valves suitable for GI pipe of size 15 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and fixing for gun-metal, globe or gate valves suitable for GI pipe of size 20 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and fixing for UPVC SCH 80 Ball valve or gate valves suitable for CPVC pipe of size 15 mm bore (minimum) complete all as specified and directed.
Supply and fixing in repair GI union suitable for GI pipe of size 15 mm bore complete all as specified and directed.
Supply and fixing in repair GI union suitable for GI pipe of size 20 mm bore complete all as specified and directed.
Supply and fixing in repair UPVC union suitable for GI pipe of size 15 mm bore complete all as specified and directed.
Supply only water flow meter of 15 mm size brass as approved of UT Chandigarh with suitable fixing material at both ends i.e union/ elbow/ tee etc complete all as specified and directed. Note :- Meter shall be taken on charge by MES through RV.
Supply only mono block type water pumping set and discharge size 25mm and discharge range 2000 to 700 LPH at 6 - 24 m head self-priming type 1.0 HP capacity single phase 220 volts complete all as specified and directed. Note :- Meter shall be taken on charge by MES through RV.
All as per serial item no 14 above but 0.5 HP capacity -ditto-
Disconnecting the 3-phase electric motor of 5 HP submersible capacity from the underground sump, taking down from the foundation, removal of defective winding from the stator, cleaning the slots & core, egressing with suitable solvent using polyester enamelled copper wire of suitable gauge & class F insulating materials, sleeves , cotton tapes etc. The winding is dried in oven & it is impregnated with insulating varnish Of Dr. Beck & Co, & backed in a oven as specified by the manufacturer. After backing a coat of epoxy resin is applied on the winding to protect it from harmful effect of moisture in egress & chemical atmosphere. The motor shall be assembled with fresh lubrication to the bearing & test run to be taken at original position , making all electrical connections. Dismantling the pump, check the alignment, impellers and bearing etc. Overhauling the pump by greasing, oiling complete. Testing for proper working complete all as specified and directed. Note:- Copper winding wire and bearing of suitable size etc. shall be measured and paid for separately under respective items.
All as per serial item no 16 above but 5 HP non clog submersible -ditto-
Disconnecting the 3 phase electric motor of 20 HP capacity from the firefighting pump set, taking down from the foundation, remove deposits of dust, oil and dirt in the fan cover to maintain good ventilation and allow proper cooling of the motor, remove and new grease in ball bearing. The motor shall be assembled with fresh lubrication to the bearing & test run to be taken at original position, making all electrical connections. Dismantling the pump, check the alignment, impellers and bearing etc. Overhauling the pump by greasing, oiling complete. Testing for proper working complete all as specified and directed.
All as per serial item no 18 above but size 65 BHP -ditto-
All as per serial item no 18 above but size 7.5 HP -ditto-
Supply only super enamelled copper winding wire complete all as specified and directed
Material and labour for repair to submersible pump set motor of capacity 5 to 7.5 HP by dismantling of submersible motor 3 phase, 440 volts cutting and removing the burnt winding wire, cleaning of slots and rewinding with super quality PVC insulated water proof copper conductor winding wire and machining as per original dia complete and replacement of thrust plate, thrust bearing, rotor straightening, sealing kit, balancing of rotor. and reassembling complete all as specified and directed Thrust plate, thrust bearing, rotor straightening, sealing kit, balancing of rotor and reassembling shall be unit rate deemed to include cost of the same by the contractor. Note:- PVC insulated water proof copper conductor winding shall be measured and paid for separately.
Material and labour for replacement of unserviceable submersible cable 3 core 1100-volt flat stranded copper conductor of size 10 sqmm complete all as specified and directed.
Material and labour for cleaning of RCC underground water sump of capacity approx. 100000 ltrs in technical area by removal of sludge, scrapping silt mud and foreign material etc with wire brushes on the walls and floor of tank and washing and flushing the surfaces with bleaching powder and taking out the same manually from the compartments and removing the same to a distance not exc 50m and depositing where directed by Engineer -In - Charge and applying two coats of first grade synthetic enamelled paint (Internally ) to the tank, writing date of cleaning with white paint on black patch 45cm X45cm on external surface of tank in technical area complete all as specified and directed. Note:- The cleaning of RCC underground water tank shall be carried out in every six months.
Material and labour for cleaning of RCC underground water sump of capacity approx. upto 25000 ltrs in technical area by removal of sludge, scrapping silt mud and foreign material etc with wire brushes on the walls and floor of tank and washing and flushing the surfaces with bleaching powder and taking out the same manually from the compartments and removing the same to a distance not exc 50m and depositing where directed by Engineer -In - Charge and applying two coats of first grade synthetic enamelled paint (Internally ) to the tank, writing date of cleaning with white paint on black patch 45cm X45cm on external surface of tank in technical area complete all as specified and directed. Note:- The cleaning of RCC underground water tank shall be carried out in every six months.
Material and labour for detect & complete repair of leakage of pipe line from surface/ground floor/floor/roof /wall of size 15/20 mm dia complete all as specified and directed. Note: (i) Pipe with fittings, union, gate valve shall be measured and paid for separately under relevant item.
Material and labour for detect & complete repair of leakage of pipe line from surface/ground floor/floor/roof /wall of size 25/40/50 mm dia incl pipe upto 1 mtr, fittings i.e. elbow, socket, nipple, union etc complete all as specified and directed. Note: (i) Rate of Pipe upto 1 mtr with fittings, union, socket, nipple, elbow etc are incl in quoted rates.
Material and labour in replacement of existing cover mild steel sheet 3.15 mm thick of size 0.61x0.46x.47 mtr with angle iron frame of size 40 x 40 x 5 mm thick with suitable nuts and bolts to fix on platform of monoblock pump duly painted with two coats of smoke grey paint over a coat of red oxide primer complete all as specified and directed.
Supply and replacing rotational moulded polyethylene water storage tank 1000 ltr capacity 2 layered cylindrical vertical with closed top ISI marked hoisted and fixed in position as specified in SSR part-I complete including tank nipples of 15/20/25 mm dia for making inlet and outlet connections complete all as specified and directed. Note: (i) Rate of tank nipple of required size -02 nos are incl in quoted rates.
All as per serial item no 29 above but capacity 500 litres -ditto-
Supply and fixing in replacement of water tank top cover round shape hinge type suitable for 500/1000 litre water tank complete all as specified and directed
Supply and fixing in replacement of DOL motor starter stainless steel suitable for 5 HP 3 phase 415 V submersible electric motor including single phase preventer, connection, testing complete all as specified and directed.
Supply only ball brass valves, high pressure, with polythene float and fly nut float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of size 15 mm dia pipe complete all as specified and directed. Note :- Meter shall be taken on charge by MES through RV.
Supply only ball brass valves, high pressure, with polythene float and fly nut float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of size 20 mm dia pipe complete all as specified and directed. Note :- Meter shall be taken on charge by MES through RV.
Material and labour for demolition of cement concrete / cutting of road/floor/hard standing/tiles/walls/pole coping etc for dismantling and laying of pipes with suitable mechanism complete all as specified and directed. Note: Pipes and PCC for finishing / filling disturbed area shall be measure and paid for separately under relevant item
Material and labour for cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate cast-in-situ as mass filling, road filling, coping of pole ,around the pole and filling/finishing of disturbed area of road/floor/hard standing/tiles/walls and any other surface etc complete all as specified and directed
Supply and fixing for brick work using sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in CM 1:6 and pointed flush as the work proceeds, incl demolition of old bricks in lime/cement mortar complete all as specified and as directed.
Material and labour for 10 mm thick rendering using cement mortar 1:6 on fair surfaces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose/soft soil and getting out for underground cable/erection of poles, stays , trench etc complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and directed
Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and directed
SANJEEV ENTERPRISES (BID ID -3462333)
LA ENTERPRISES (BID ID -3462087)
M/s Friends Engineering Works (BID ID -3467419)
GOODWILL ENGINEERS (BID ID -3467582)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
Tenderdocuments99.pdf
Tender Documents • 1.36 MB
BOQ_821829.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .