WS Scheme Gaggubua, Block Gandiwind Under JJM/ PRWSSIP-2a

Amount

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (6kgf/cm2) (excavation & including specials)

PVC pipe 63mm o/d

PVC pipe 75 mm o/d

PVC pipe 90 mm o/d

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (6kgf/cm2) (excavation & including specials)

PVC pipe 63 mm o/d

PVC pipe 75 mm o/d

PVC pipe 90 mm o/d

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63 mm o/d

PVC pipe 90 mm o/d

Dismantling of metalled road and compacting origional ground below embankmenet.

PVC pipe 63 mm o/d

Providing and fixing C.I/D.I Flanged end stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000 Including jointing,testing&costs of nuts and bolts & insertion of sheet, all carriage complete (with approval of engineer in charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department each of Size 0.6m x 0.6m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.9m x 0.9m

Providing proposed water connection with to household up to Wall with providing, laying, jointing, testing GI pipe lines 15 mm i/d = 2.50 mtr. , B-Class as per CSR 28.36 (A) , (Above ground level) , Providing & fixing MDPE pipe 15 mm i/d with specials 2.00 mtr. (Below GL), including cost of special such as tees, bends, sockets, elbow, peet valve, union, nipples and hocks etc, cutting, threading and testing in trenches in the ground and ISI 15 mm i/d GM ferrule as per IS" 2692 and 3" i/d clamp with C..I. bib cock, 15 mm i/d as per IS " 210 with stainless steel spindle of approved make as per CSR 30.65 (b) Complete in all Respect

Prov. & Installing testing , commissioning of One No. electrically driven diaphragm opreated system chemical dosing chlorinator suitable for delivering 0.5 to 6 liters of bleaching powder solution/Sodiu hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr. as per DWSS standard specification

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 362 LPM against a head of 72 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including G.I. Column Pipe of suitable size 80 mm =46 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications. ( Rate excluding of old machinery 25 BHP)

Cost of pumping set

Cost of pannel board

Submersibale cabel

Development of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing

Providing & fixing PCC fencing poles with 6' height 3"x3" Top & 4"x3" base providing with 3Nos. Hooks complete in all respects.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing .

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing .

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including & Analysis complete in all respects

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing

Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Provision of carriage of material complete in all respects

Bazri 16.31 cum

Sand 18.60 cum

Prov. & fixing in position CI Bib Cock(tap)(15mmi/d) as per IS:210 with stainless steel spindle of approved make and Fixing of Nozzle to control flow of water (to the approval of Engineer in Charge Complete in all respects.

Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge

Repair of Pump Chamber

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.panelled, glazed or glazed and panelled.

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner traps, wooden knobs or handles fixed in position (Size 45 x 60mm).

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.+Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (AS PER AC SLIP 1 CSR-2020 16.21 item Deleted)

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

White washing (Three coat)

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade(Qty as per sr.no 36)

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make