ADDN / ALTN TO CHOLA ANNEXE AND PROVN OF FIRE RETARDANT DOORS AT AFS THANJAVUR

Amount

Demolition of Brick work or stone boulder masonry, including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles but built in cement mortar complete all as specified and as directed.

M&L brick work with sub class 'B' old size bricks bricks bult in CM 1:4 straight or curved on plan n,exc 6 m radius complete all as specified and as directed.

M&L plastering in CM 1:6, 10 mm thick on walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L preparation of new plastered surface of wall and applying two coats of Texture paint of any colour and shade and pattern consist of combination of two or more colour over a coat of primer complete all as specified and as directed. (Texture paint consist of top coat and base coat).

M&L complete removal of existing treatment of old decorated by brooming down scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying two coats of Texture paint of any shade and in any pattern at places in horizontal / vertical directions of wall surfaces after preparation of old decorative surface complete all as specified and as directed. (Texture paint consist of top coat and base coat).

M&L False ceiling with 12mm thick 1.20m x 1.80m Plaster of Paris sheets fixed with machine screws on and including GI channel 22 gauge thick grid of size 600 x 600mm work, main joints placed at 1.20m centre to centre, cross joints placed at 600mm centre to centre, hanging with 22 gauge GI strip suspenders from roof, ‘J’ hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with Gypsum anhydrous binder and prepare the surface till smooth surface is achieved and applying two coats of plastic emulsion paint of any pattern and design over a coat of texture primer on ceiling sheets complete all as required as per manufacturer’s instructions and as directed. Notes :- 1. The pattern and design shall be as directed by the Engr-in-Charge during the execution of work. 2. The exposed surface of the false ceiling shall be joint less, even and smooth to receive two coats of oil bound distemper 3. The POP Sheets shall be fixed with suitable screws below the grid.

M&L cornices / moulding using POP to the pattern of cross sectional dimension exc.13 Sqcm and n.exc 25 Sqcm and fixed in decorative pattern including preparation of surfaces and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and as directed.

M&L Vitrified tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) exceeding 0.42 sqm but not exceeding 1.00 sqm, 8 to 10 mm thick over and including 15mm thick screed bed in CM 1:6 as in floors etc including provision of 3mm spacer between the tile joints and the jonts shall be neatly filled and finished with epoxy jet of any colour match to the tiles complete all as specified and as directed.. (The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost shall be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work)

M&L Non skid coloured ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles ) exceeding 0.18 sqm but not exceeding 0.38 sqm 8 to 10 mm thick over and including 15mm thick screed bed in CM 1:6 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles complete all as specified and as directed..(The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost shall be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work)

M&L glazed digital Coloured tiles as in vertical surface size exceeding 0.36 sqm but not exceeding 1 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed..(The joints /gap of wall tiles shall be fixed 3mm thick spacer and filled with suitable colur epoxy filler)

M&L 18 to 20mm thick mirror polished green marble stone slab as in window cills, vertical jambs of doors and soffits etc, exposed edges shall be chamferred and polished to receive aluminium joinery over 10mm thick cement plaster in CM (1:4) jointing and pointing in neat cement slurry mixed with pigment to match complete all as specified and as directed. Note : (i) Only one piece of marble slab shall be fixed in jambs of door i.e without any joint shall be provided in post / columns and vertical surfaces.

Taking down aluminium doors and windows of any description including complete accessories of any type all as specified and as directed

Supply and fix powder coated aluminium frame for doors / windows / ventilators minimum thickness of powder coating is 50 micron with one or more rebates etc as in windows / ventilators including necessary joining cleat, glazing clips, rubber neoprene packing, complete all as specified and as directed. Note: Glass shall be paid separately under relevant items.

Supply and fix powder coated aluminium window and ventilator shutters door shutter, side hung type without sash bars aluminium section of weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges 01 No per shutter of windows, snap beading etc complete all as specified and as directed. Note: Glass shall be paid separately under relevant items.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos and 03 Nos of hinges in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and as directed.

S&F 5 mm thick sheet tinted glass ordinary quality and glazing with aluminium clip square area exc 0.5 sqm in each pane complete all as specified and as directed.

M&L 19mm thick plywood, grade BWR, type BB, fixed with adhesive and nails as in cubic cabin/ working table etc in any shape and in any direction etc to the required size and pattern as in cabin of any pattern and design etc complete all as specified and as directed.

M&L 12mm thick plywood, grade BWR, type BB, fixed with adhesive and nails for as in cubic cabin/ working table etc in any shape and in any direction to the required size and pattern as in cabin of any pattern and design etc complete all as specified and as directed.

M&L for 0.9mm thick decorative laminated type - I of surface finish (colour & pattern as approved) of any colour and pattern (pattern consists of combination of two or more colour) fixed with approved adhesive as per manufacturers instruction finished to approved size as in cubic cabin / working table of any pattern and design etc complete all as specified and as directed.

S&F Cast brass powder coated Auto lock, closing, concealed of any degree releasing sys butt hinges of size 100mm complete all as specified and as directed.

S&F Cast brass powder coated Box type decorative door handle of 75mm sixe fixed complete all as specified and as directed.

S&F Cast brass powder coated Box type decorative door handle of 100mm sixe fixed complete all as specified and as directed.

M&L 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc 06 sqcm not exc. 13 Sqcm complete all as specified and as directed.

M&L 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc 03 not exc. 06 Sqcm complete all as specified and as directed.

S&F butt hinges 125mm size type B-12, cast brass with mild steel hinge pin, bright polished and fixed complete all as specified and as directed.

S&F butt hinges 75mm size Type B-11 cast brass with mild steel hinge pin, bright polished and fixed complete all as specified and as directed.

S&F telescopic drawer slider suitable for working table, drawer on andy sixe and any pattern complete all as specified and as directed.

S&F PVC profile ceiling of surface laminated any pattern and any shape of 7 to 10mm thickness and any colour at any position over a grid of Galvanised iron channels installed on the wall, which works as a base to install the PVC profile panels. Each panel have to interlock with each other complete as per manufactures instruction as specified and as directed.

S&F 10 mm thick crystal polish glass as in glass shelve in wall mounted cabinet / cubical cabin / workring table of any position locations as directed / indicated with required material like adhesives / chemical solutions and "D" or "F" Brackets of suitable size complete all as specified and as directed.

M&L French polishing on surface of any description width or girth including cleaning and preparing the surface with a coat of wood filler on new work and two or more coats till the desired finish is obtained complete all as specified and as directed.

S&F WHB including pillar tap, waste coupling, bottle trap and hose connector Jaquar model or eqvt :- Hand wash basin JDS-WHT-25909 Thin Rim Table Top Basin, Shape - Rectangular, Size: 485x395x150mm Pillar cock OPP-15005BPM Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses Waste Coupling ALD-705L130 32mm Size Full Thread with 130mm height Bottle Trap ALD-769L300x190 (with Internal Partition) 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange 450mm Long Braided Hose ALD-805B with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers)

S&F EWC Bidspa Rimless Wall Hung WC with Electronic Seat Cover, Hinges, Accessories Set, Size:400x580x370 mm Jaquar model ITS-WHT-89953PP or eqvt complete all as specified and as directed.

S&F Concealed flushing cistern Single Piece Slim Concealed Cistern with Floor Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC Jaquar model JCS-WHT-2400FS or eqvt and Flush plate jaquar model JCP-CHR-852415 Control Plate Alive or eqvt complete all as specified and as directed.

S&F Concealed Body for 3-Inlet Single Lever Diverter with Button Assembly, CartridgeSleeve but without Exposed Parts Jaqaur model CAT part No ALD 193 or eqvt complete all as specified and as directed.

S&F Single Lever 3-inlet Divertor Exposed parts kit Consisting of Operating Lever, Wall Flange & Button OnlyJaquar model (Suitable For Item ALD-193) KUB-35193FK or eqvt complete all as specified and as directed.

S&F Telephonic shower including 1 mtr length 15mm pipe Jaquar model complete all as specified and as directed.

S&F CP brass spout Bath Tub Spout with Button Attachment for Jaquar model Hand Shower CAT part No SPJ-15463 with Wall Flange or eqvt complete all as specified and as directed.

S&F OHT Shower telephonic shower including 1 mtr length 15mm pipe Jaquar model or eqvt complete all as specified and as directed.

S&F Towel Rail jaquar model AQN-7781 600mm long with Lower Hangers complete all as specified and as directed.

S&F Paper Holder with Flap Recessed Type (Stainless Steel) jaquar model AHS-1553 or eqvt complete all as specified and as directed.

S&F Towel Ring Square jaquar model AKP-35721P or eqvt complete all as specified and as directed.

S&F Corner Glass Shelf (with Bracket) jaquar model ACN-1173 or eqvt complete all as specified and as directed.

S&F Soap Dish Holder jaquar model ACN-1131N or eqvt complete all as specified and as directed.

S&F Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) jaquar model ALD-579 or eqvt complete all as specified and as directed.

S&F Angular Stop Cock with Wall Flange jaquar model LYR-38053 or eqvt complete all as specified and as directed.

S&F Bib Cock with Wall Flange jaquar model ARI-39037 or eqvt complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F factory made solid raised panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS freame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

S&F 5 to 6mm thick crystal polish looking mirror with fully grinded/ chamfered edge of superior quality of sixe 1200mmx600mm and fixed with 06 Nos of CP brass struds complete all as specified and as directed.

S&F Full stall urinal Urinal without Sensor of size 710 x 480 x 300mm CAT part No URS-WHT-0704 of Jaquar model or eqvt complete all as specified and as directed.

S&F Sensotronic Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock of CAT part No SNR-51087 jaqaur model or eqvt complete all as specified and as directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB"S/lsolators after and including taking down old DB with MCB complete all as specified and as directed.

S&F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed.

M & L Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 6 Sqmm copper green colour earth wire complete all as specified and directed ( Note : 02 run 6 Sq mm single core cable, one run of 6 Sqmm earth wire & One run of PVC conduit will measured as one RM).

Taking drawn carefully old aluminium/copper point wiring for one light, socket or power etc incl all fitings such as switches sockets, holders, light fittings, fan requlators, distribution boards etc and making good the disturbed surface of wall ceiling complete.

M&L point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with multistranded copper conductor flame retardant low smoke (FRLS) in including PVC rigid non metallic 25 mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/rectangular block/box of suitable size fixed by means of brass machjne screw and cap washer including size 1.5 sqmm (nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductr cable as earth continuity conductor connected to main switches/DBs or common earth dolly complete all as specified and directed.

Description all as per srl item No 58 here-in-before but for one ceiling fan / Exhaust fan point, controlled by one way switches 5/6 Amps complete all as specified and as directed.

Description all as per srl item No 58 here-in-before but for one 3 pin socket outlet point, 5/6 Amps on the independent board complete all as specified and as directed.

Description all as per srl item No 58 here-in-before but for point wiring with 4 Sqmm (nominal cross sectional area) single core stranded copper conductor for one switch socket out let point, 15/16 amps on the independent board complete all as specified and as directed.

M&L switch modular 1 way 6 amps 1 module complete all as specified and as directed.

M&L modular white cover with frame 3 module complete all as specified and as directed.

M&L modular white cover with frame 6 module complete all as specified and as directed.

M&L modular metal flush box 3 module complete all as specified and as directed.

M&L modular metal flush box 6 module complete all as specified and as directed.

S&F Switch socket combination, 2 and 3 Pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type white/ ivory finish complete all as specified and as directed.

S&F Switch socket combination, 2 in 1, 6 pin, 5/6 amps and 15/16 amps multipurpose, white/ivory finish, flush non shutter non inter locking type complete all as specified and as directed.

Supply and fixing in replacement OCTANE LED 2X2 PANEL 36 Watt LED ceiling light fitting suitable for arm strong /grid ceiling with electronic driver complete with all accessories internally pre-wired and including connecting up with twin core copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing in replacement of E LITE LED PRIDE PLUS NEO wall mounted LED light 10 Watt LED, 6500K with decorative ultra slim square profile LED lighting fixture with extruded polycorbonate environmental friendly energy efficiant complete all as specified and as directed.

Material and labour earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4.0mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron or steel all as shown in electrical Plate No-3 connected to earthing test point complete all as specified and as directed.

M&L sub main wiring with 2 run of 4 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant low smoke cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 2.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs complete all as specified and as directed.

Taking down the split AC unit (any type and Capacity) carefully from its installed position, dismantling complete with base frame, inlet and outlet refrigent copper tube,electrical connectios including stabilizer and keeping safely and carried out general servicing of Indoor and outdoor unit and refixing at existing or diverted to location with base frame and all necessary connection and testing after installation complete all as specified and as directed. Note:- (a) Any damages / broken of any parts of AC during the work, contractor will responsible for the repair of the same or replaced with new one without any extra cost. (b) The rate quoted is deemed to be inclusive of Necessary arrangement / modification / refixing.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20 amps capacity complete all as specified and as directed.

Supply and fix exhaust fan steel body AC single phase 230 volt of size 300mm sweep with blades and frame and louvers complete all as specified and as directed.

Supply and fix fire rated steel doors with frame comprising of steel frame having double rebated frame profile 139mm x 57mm made from 1.5mm galvanised steel sheets and 45mm thick shutters made from 0.8mm thick galvanised steel sheets filled with fire retardant material suitable for stability and integrity with 120mins fire rating finished with powder coating as per IS 3614 part II complete all as specified and as directed.

S&F stainless steel ball bearing hinges 4"x3"x3mm complete all as specified and directed.

S&F door closer with standard arm ( make - DORMA TS 68) complete all as specified and directed.

S&F vision panel schoot glass 2 Hour fire rated of size 200mmx300mm complete all as specified and directed.

S&F flush bolt 300mm (Make- DORMA) complete all as specified and as directed.

S&F lever handle 8100 type 1 pkg (Make- DORMA) complete all as specified and as directed.

NITHYASRI AND CO (BID ID -3474623)