SPL REPAIR TO TOILETS FOR VIP, OFFICERS, LADIES AND GENTS BELOW SPECTATOR GALLERY AT CPG UNDER GE (EAST) DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar in any description and position including removal of rubbish out side complex (MOD land), complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving not exe 15cm thickness (below or above ground level) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

Dismantling of PVC water tanks exc 200 litres and not exc 500 litres capacity of any condition or type complete all as specified and directed.

Dismantling of Cast Iron pipe/ RCC drain pipe / PVC pipe up to 100 mm bore complete all as specified and directed.

Dismantling of Cast Iron pipe/ RCC drain pipe/ PVC pipe up to 75 mm bore complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles / debris from premises, complete all as specified and directed.

M&L for cutting chases on brick or concrete surface for concealed water tubing or girth not exc 10cm including making good of disturbed surfaces with CM 1:3 or PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed.

Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed.

Description all as per item No. 8 above but 20 mm bore.

Taking down chowkhat or frames exc. 1.5 Sqm and not exc 4 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed.

Dismantling structural steel work including doors, gates, railings etc, but excluding framed truss etc.

S&F for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, S&F in opening as per specification & drawing

S&F for factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing with 100mm long stainless steel butt hinges in frame at site as per specification & drawing

S&F Aluminium alloy powder coated standard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, 2 hinges and all standard fittings complete all as specified and as directed.

M&L for mild steel work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, chowkhats, steel door, ladders; framed balusters; walk ways; railings; framework of water tanks including pintol hinges, stops, hand made sliding bolts and similar work conforming to Fe.290.Gde-E-165

M&L for 0.63mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, with diameter of bolt 5 to 10mm and n exc 5cm long with nut and washers.

S&F for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed

S&F for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed to shutters.

S&F 100mm long extruded aluminium alloy handles, fabricated type,anodised

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4)

M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed.

M&L Rendering 12 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) and finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ concrete surfaces with water proofing admixture finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 75mm thick plain cement concrete type D-2,(1:4:8) using (40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

M&L for Vitrified coloured tiles dark shade 8-10mm thick (square/rectangular) polished, area of each tile exc 0.42 sqm but not exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

Description all as per item No 33 above but 20 mm bore.

S&F white colour Rotational moulded polyethylene water storage tank 1000 litres capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

S&F in repairs Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connection to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler )

S&F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap/P-trap , including seat cover with connection to drain and to flushing pipe anti syphonage pipe, and making good to floor complete.

S&F in repair vitreous China squatting pan of pattern “long pan”, size 630 mm white with ‘P’ or ‘S' trap, front or back inlet and foot rests, any pattern with connection to drain and to flushing pipe anti syphonage pipe, and making good to floor complete.

S&F ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm with CP grating and CP bottle trap. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63 OR Equivalent

S&F in repair vitreous China wash basin, white, flat back, size 630x450mm with PVC flush pipe 32mm bore including brackets, cutting for and pinning in ends of brackets or erecting stand.

S&F in repair pillar cock Auto Closing System, cast copper alloy , fancy type , chromium plated, screwed for iron pipe and fixed complete all as specified and directed. (Make : Jaquar cat part No. PRS-031 or equivalent in Marc/Kohler)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S&F hat and coat hooks, set of six, solid body of brass, 175mm to 250 mm complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock long shank,cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union.

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc/Kohler)

S&F in repair bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule.

S&F in repair 10 Ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S&F in repair Stainless steel grating 100mm dia with centre hole of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.

S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

S & F in repairs Designer type high quality fancy type looking mirror of size 1000mmx 450mm as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repair PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed.

S&F in repair SS soap dish, fixed in repairs, complete all as specified and as directed. (Make - Jaquar/ Marc/ Kohler)

S&F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, grating and Union for discharge pipe with grating complete.

S&F in repair CP brass urinal spreader with pipe suitable for fixing with 15 mm dia pipe.

S&F in repair Vitreous china squatting plate urinal, white, complete including providing and fixing plugs, bedding urinal against floor in cement mortar 1:2, securing urinal pointing around urinal back in cement , flush pipe, connection to discharge pipe complete.

S&F CP brass toilet paper holder with flip cover fixed to wall with ss screws.

S&F in repairs CP health faucet with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified. Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in Marc/ Kohler)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete. (Make - Jaquar/ Marc/ Kohler)

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45 cm long complete. (Make: Jaquar/Marc/Kohler)

S&F 110mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

Description all as per item No. 62 above but 75mm outside diameter.

S&F 110 mm bore PVC (SWR) junction single, (Single T), bends equal or unequal

Description all as per item No. 64 above but 75mm .

S&F in repair UPVC (SWR) 110 mm Nahani trap with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

S&F in repair UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.

M&L for preparation of new surface decorated brick/concrete/ plastered or unplaster surfaces of walls, pillars, cornices by brooming down etc and applying two coats of Oil Bound Distemper over a coat of interior primer complete.

M&L for preparation of new surface decorated brick/concrete/ plastered or unplaster surfaces of on celling surface and applying two coat of oil bound distemper over a coat of interior primer etc complete.

M&L for preparation of new/old external surface decorated brick/concrete/ plastered or unplaster surfaces of walls, pillars, cornices by brooming down etc and applying a layer water proof wall care putty, again sand papering thus making surface even & smooth and applying two coats of weather proof exterior acrylic emulsion paint premium quality over a coat of exterior primer complete all as specified and directed. Allow 6-8hrs to dry the surface for painting of subsequent quotes complete.

M&L for preparation of new/ old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying 2 coat of synthetic enamel plaint.

S&F Aluminium alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/Openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick pre-laminated particle board as required including handles, tower bolt, locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

M&L for cutting holes of super facial area exc 150 sqcm but not exc 400 sqcm into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required

M&L for Epoxy Grouting of superior quality filling in joints to address seepage problem of any type of surfaces (Kota/Granite/floor & wall tiling etc) including scraping the existing treatment on joints of any type as per manufactures instructions complete all as specified and as directed. (Make : Aditya Birla/Asian Paints/Dr. Fixit) Note :- (i) Application shall be done through authorised applicator only. (ii) Purchase voucher of Epoxy Grout shall be produced for verification of Engineer-in-Charge/GE before RAR.

M&L for chipping out spoiled and loose concrete cover and spoiled reinforcement of concrete column, beam, slab, chajjas, parapet and the like as directed up to 25mm to 35mm thick roughening and cleaning concrete surface with steel wire brushes washed with water and allowed to dry including de-rusting steel reinforcement, providing MS wire fabric mesh 75x75x2mm as reinforcement to concrete surface, applying adhesive / admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade cement and two part of sand mixed with adhesive/ admixture @ pressure of 2.5 to 3.00 Kg/ cm² by guniting machine and surface finished even and fair including necessary scaffolding, form work complete all as specified. Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycreate admixture@ 2.25 kg by weight of cement all as manufacturer instruction. (b)When polymix concreting taking condition grouting is done with polycomputer@uppercent by weight of cement all as per manufacturer instructions poly concrete admixture Shall be prepared from chemical added se private limited co. or there authorised dealer. (c) Cost of all above aspects shall be deemed to be included in the ported rate of respective item and nothing extra shall be paid on this account

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete with accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc and making good the disturbed surface all as directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked drawing in PVC concealed conduit and PVC conduit fitting including drawing FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size with modular sheet with cover plate for fixing modular switches/sockets/fan regulator etc complete all as directed

One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

One socket outlet point 5 amps on the same board.

One socket outlet point 5 amps on the independent board.

Description all as per Srl Item No 78 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed. Make-Goldmedal Air/ Curve/ Nixon/ Havells Murano/ Schneider-Liviya/ Legrand Avtear or equivalent.

S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed. Make-Goldmedal Air/ Curve/ Nixon/ Havells Murano/ Schneider-Liviya/ Legrand Avtear or equivalent.

S&F Modular switch 16 Amp with indicator, 1 way, 1 module size complete all as directed. Make-Goldmedal Air/ Curve/ Nixon/ Havells Murano/ Schneider-Liviya/ Legrand Avtear or equivalent.

S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed. Make-Goldmedal Air/ Curve/ Nixon/ Havells Murano/ Schneider-Liviya/ Legrand Avtear or equivalent.

Supply and fix of Modular AC 25 Amp SP mini MCB, 230 Volts, 50 Hz suitable for module sheet complete all as specified and as directed.

S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S&F surface and wall mounted LED tube light fitting with Aluminium housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector, Luman efficiency more than 120 lm/watt PF>0.90, IP above IP20 complete all as specified and directed.

S&F LED energy efficient integrated battens fittings, Aluminium extruded heat sink with shatter proof opal shell of Aluminium housing, 10 Watts, cool/warm white as per site requirement, Luman efficiency more than 120 lm/watt PF>0.90, IP above IP20 complete all as specified and directed.

S&F in replacement LED bulk head fitting 10W aluminium housing with inbuilt driver complete all as specified and directed.

S&F in replacement Wall Mounted Fan 400 mm sweep (RPM-1350) plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as specified and as directed.

S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm.

S&F of MCB DB conforming to IP 43 - IK 09 with double door , SPN 8 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed. (Make: Legrand/ Schneider/ Siemens/ LK (L&T).

S&F of MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed. (Make: Legrand/ Schneider/ Siemens/ LK (L&T).

S&F of MCB SPN B Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed. (Make: Legrand/ Schneider/ Siemens/ LK (L&T).

Taking down ceiling fan/Geyser any size sealing cable end, dismentling blades and kept in MES store yard. complete all as specified and as directed.

S&F of instant heating Geyser 03 liter capacity vertical type with steel tank and glass inner linen complete including fasteners (02 No) for hanging and CP and PVC connection for inlet and outlet upto stop cock complete all as specified and as directed. Make : Bajaj / Usha/ Crompton.

S&F Automatic Hand drier hot air dispenser with infrared sensor metal body with all accessories including all electrical connection complete all as specified and as directed. Make-Euroforce or equivalent.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engineer-in-Charge.

Supply and Laying in replacement XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core, complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Akhil Enterprises (BID ID -3445021)

K S CONSTRUCTIONS (BID ID -3444866)

Vipul Construction (BID ID -3444951)

M/s Verma and Co (BID ID -3444388)

Choudhary Enterprises (BID ID -3444377)

M/S GEETANJALI ENTERPRISES (BID ID -3445095)

GIAN BUILDERS (BID ID -3445066)