Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.2 Cr
EMD Value
₹4.3 L
Closing Date
9 Dec 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Rudregowda
CONSTRUCTION OF PROPOSED 35TPD MRF CENTRE (MATERIAL RECOVERY FACILITY) OF PEB STRUCTURE (PRIMARY & SECONDARY SHED) AT KALENAHALLI LAND FILL SITE
DMA/2024-25/BD/WORK_INDENT21730/CALL-2
DMA/2024-25/BD/WORK_INDENT21730/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
DMA City Municipal Council Mandya
9 documents required · 9 mandatory
Satisfactory completed (at least 50%) as prime contractor at-least one such similar work of value not less than Rs. 145.00lakhs (50% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Earthwork - 2235.00cum, Providing and laying in PCC/RCC-550Cum, Steel fabrication: Supplying, fitting and placing TMT Steel Reinforcement-21.00 Ton, Providing and PEB structural steel work riveted, bolted or welded in built up section, trusses and framed work-74240kg, precoated Galvanized iron profile sheet-3074.00Sqm) (80% of peak rate of construction)
Liquid assets and /or availability of credit facilities of no less than Rs. 87.00 Lakhs (estimated cash flow for 3 months of peak construction period)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. 580.00 Lakhs)
Total value of civl engineering works executed and payments received in the last five years, CA Audit report With UDIN no
Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
₹5,000
₹4.3 L
7 Nov 2024
7 Nov 2024
11 Dec 2024
7 Dec 2024
2 Dec 2024
CONSTRUCTION OF PROPOSED 35TPD MRF CENTRE (MATERIAL RECOVERY FACILITY) OF PEB STRUCTURE (PRIMARY & SECONDARY SHED) AT KALENAHALLI LAND FILL SITE
KSRB 1-1.14.1: Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricad...
KSRB 2-2.1.2: Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as p...
KSRB 2-2.3.2:Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
KSRB 2-2.2.3.1 :Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coar...
KSRB 2.11 Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking...
KSRB 5-5.4: Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR)
KSRB 1-1.8: Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site...
KSRB 6-6.33: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conf...
KSRB 8-8.3.1: Providing 15mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffo...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...
KSRB 8-8.51 : Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth comp...
KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
KSRB 8-8.54.1 : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
KSRB 11-11.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, ...
KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifica...
KSRB 11-11.35.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approv...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
CMC MANDYA (MRF) TD corrected (1).docx
Tender Document • 0.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .