Special repairs and renovation of cabin , body and wiring for 04 Nos Trucks under Workshop Sub-Division bearing Reg. No. AN 4788, AN 4480, AN 4267 and AN 4346

Amount

Renovation of Cabin by replacing the old damaged plates and channel with suitable vague of G.I plates, M.S plates and M.S channel by arc and gas welding, finishing surface by applying of putty etc., painting of complete renovated cabin by applying of two coasts of primer, P.S grey and two coats of automotive paint. Replacement of radiator grill, fenders and 24 volt starter (Lucus) etc., as directed by the Engineer -in-Charge. (1). G.I Plate 18 SWG-05 Nos. (2). M.S Angle 3"-90 kg (3). M.S plate 4 mm-2 Nos. (4). 3.15 mm welding rod-3 Pkt (5). 2.5 mm welding rod -3 Pkt (6).4 mm welding rod -2 Pkt (7) Carbide-8 kg (8) Oxygen cylinder-3 Nos. (9) Gas welding rod-5 kg (10) Rubber beedings and pad-1 set (11). Plastic fittings-1 set (12) Side glass mechanism-2 Nos.(13) Front wind shield glass-1 No.(14) Cabin door glasses-2 Nos.(15) Door Lock assembly-2 set (16) Automotive yellow paint-5 Ltr.(17) Primer-3 Ltr.(18) Metal paste-6 kg.(19)Putty M.C-5 kg (20) Thinner N.C-4 Ltr.(21) Emery Paper-15 Nos.(22) Black Paint-3 Ltr.(23) Starter 24 V Lucus-1 No.

Renovation of body and chassis by plating with suitable vague of G.I plate, M.S plates ,M.S angle and M.S channel, alignment of chassis by required welding works, repair/replacing of old fender and complete surface of painting with two coats of P.S grey anti corrosive and two coats of automotive paint as directed by the Engineer -in-Charge. 1)M.S Angle 3"-140 Kg (2) M.S Channel-140 kg, (3) M.S plate 4 mm-3 Nos. (4) 3.15 mm welding rod-3 Pkt.(5) 2.5 mm welding rod -3 Pkt.(6) 4 mm welding rod -3 Pkt.(7) Carbide-4 kg (8) Oxygen cylinder-1 No.(9)Gas welding rod -6 kg (10) Automotive yellow Paint-5 Ltr.(11) Black Automotive Paint-5 Ltr. (12) Primer-3 Ltr. (13) Metal Paste-5 kg (14) Putty M.C-4 kg(15) Thinner N.C-3 Ltr.(16)Emery Paper-14 Nos. (17) Black Paint-5 Ltr.

Repairing of electrical wiring system by replacement of complete wiring, harness, electrical fittings of approved make replacing /repairing dash board equipment such as switches, meter, wiper motor, wiper blade assembly, ignition switch etc., replacement of head light/ head back light assembly etc., as directed by the Engineer -in-Charge. (1) Complete Wiring Kit-1 set (2) Head Light Assembly with Bulb-2 Nos.(3) Rear Indicator Assembly with Bulb-2 Nos. (4) Reflector-2 Nos (5) Cabin Light-1 No.(6) Meter Bulb with holders-1 set (7)Brake Switch-1 No. (8) Wiper motor with Arm & Blade assy-2 set (9) Ignition switch-1 No.