Supply Of Labour and Building Material For A.T.S under Construction For J.N.V.C.B.S.E Pattern at Siswa Mankapur Distt-Gonda.

Amount

Labour Supply Item

Layout of building including making refrence pillar etc to complete the works.

Labour Charge For Jungle Clearance I/C Uprooting.

Earth work in Excavation in trenches for foundations in ordinary soil (Loam, clay or sand) including lift up to 1.50 m and lead upto 50 m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i.e. within a lead of 50 m. upto 1.50 m depth

Labour charges for laying cement concrete with 1:4:8 (cement :coarse sand:graded stone agregate 40 mm. nominal size) and curing complete in foundation and floor

Labour Charge for brick work in foundation and plinth with Cement Mortor Specified mix I/C cost of T&P and Curing.

Labour Charge for brick work in Superstructure with Cement Mortor in 230mm thick wall Specified mix I/C cost of T&P and Curing.

Labour Charge for brick work in Superstructure with Cement Mortor in 115mm thick wall Specified mix I/C cost of T&P and Curing.

Labour charges for Laying R.C.C. 1:1.5:3 (cement : coarse sand : graded stone agregate 20 mm. nominal size) and curing complete in foundation and floor

RCC work per column 1:1½:3 cement, coarse sand & Beam stone grit 20mm.

RCC work for lintel and chajja/Beam & Slab.

Filling of Excavated earth intrenches and Floor in 20cm layer and watering rammining Complete.

Supply & Filling of Cartage earth

Higher charge of Shuttering for Foundation Beam Coloumns up to ground level.

Higher charge of Shuttering for column

Higher charge of Shuttring for lintel and chajja,Beam,Slab.

Steel work in reinforcement i/c cutting bending binding and placing as per drawing 8mm to 16mm dia

Steel work in reinforcement i/c cutting bending binding and placing as per drawing Above 16mm dia.

Labour Charge for 12/15mm thick plaster in 1:6 (Cement : Corase sand )Mortar .

Labour Charge for 20mm thick plaster in 1:3 (Cement : Corase sand )Mortar with neet finish.

Groove Cutting 10to12mm thick in plaster.

Labour charge for fixing of door chaukhats wooden pressed steel,Z-iron in masonry/concrete in specified mix in ground floor i/c cutting of brick hole upto 1.50 sqm.

Same as Above but opening 1.50to 4.50sqm

Same as Above but But for Ventilators opening upto0.50Sqm

Material Supply Item Supply of M 150 class bricks including cartage,loding,unloading & stacking upto site.

Supply of P.P.C. cement 43 grade. (ACC/Birla/Mychem/Ultratech)

M.S or Iron work of small sizes and sections such as holding down bolts ,hold fasts ,tierods,gratings etc. (when not i/c in an overall rates) wrought to required form including supply of steel and its wastage including cost of bolts,nuts of required for and welding grinding and completion of work.fabrication of holes,door,chaukhats nosing. Angle iron Chaukhat 40x40x5mm

M.S work in Z-Section Window with Grill and Sqbar (I.S.I) as per Specification.

PURVANCHAL CONSTRUCTION