Sub Work Supplying, Erection and Commissioning of a 15HP submersible motor pump set for bore well at sethur

Amount

PSR CODE NO.31.250.1H Supplying of electrically operated wet type submersible motor and pumpset (Texmo/ KSB/ Taro/ Kirloskar make), AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. to suit the borewell (150 / 200mm dia.), complete. The rate includes, all taxes, freight, etc., FOR at site in U.T of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning.(15 HP Submersible motor and pumpset).

PSR CODE NO.31.255.1C Supplying and fixing of 7.5KVAR power capacitor (CG/L&T/Siemens make) for 15 HP motor complete.

PSR CODE NO.31.265.1 Providing and fixing 50 mm dia GI pipe (Class B) conforming to IS 1239 (Part 1:1990) with GI fittings including trenching, refilling etc., complete for UG cable duct.

PSR CODE NO.31.256.1B Supplying and fixing of fully automatic air break star-delta starter range for 10A to 23A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 15HP to 17.5 HP pumpsets

PSR CODE NO.31.268.1D Supplying,fixing and lowering into the borewell high tensile threaded PVC column pipes which are to be connected to the submersible pump,including labour charges,jointing materials etc.,complete.-100 mm dia

PSR CODE NO.31.272.1 Supply and fixing of 80/100mm dia. M.S. erection clamps of size 80mmx12mm with bolts, nuts, washer etc., complete.

PSR CODE NO.31.258.1B Supplying and fixing of 1x3x6 sqmm (single run) PVC insulated copper submersible flat flexible cable of Finolex make complete.-12.5HP to 20HP pumpset

PSR CODE NO.31.259.1A Supplying of 3.5/ 4x25 sqmm underground cable (Paragon/suncab/Empire) complete.-upto 25HP pumpset.

PSR CODE NO.31.260.1A Laying of UG cable and providing termination of cable joint with suitable cable gland,cable socket etc., complete - 3.5/4 x 25 sqmm cable.

PSR CODE NO.18.10.5 Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls etc.Intermnal work - exposed on wall 40 mm dia nominal bore.

PSR CODE NO.31.266.1 Supplying and fixing of pole clamp to hold the G.I. Pipe with electric post.

PSR CODE NO.31.261.1 Supplying and fixing of meter board of size 600mmx900mmx150mm on suitable angle frame with suitable water proof plywood 12mm thick for receiving ED supply. The board frame shall be painted and covered on all sides by 16 gauge M.S. sheet and fixed with 3 Nos. of 100 Amps fuse carrier (Havells/Standard/Anchor make) with screws etc., complete.

PSR CODE NO.31.262.1 Supplying and fixing of teak wood aerial board with 100 Amps HRC fuse base and fuse link and suitable post clamp to hold the G.I. Pipe with electric post including bolts and nuts etc., complete.

PSR CODE NO.31.263.1 Making earth pit of G.I. pipe for earthing in earth pit with 40mm dia. G.I. pipe medium class of length 3.05m perforated with 46 Nos of 12mm dia. holes, pipe lowered in bore holes of 150mm dia. and filled in with charcoal and salt in alternative layer of 300mm, the top of G.I. pipe shall be clamped. Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround,covered with R.C.C. precast slab etc. as per I.E. standards.

PSR CODE NO.31.267.1A Supplying and fixing of copper flat (25 x 3mm) for earthing arrangements including bolt and nuts etc.

PSR CODE NO.31.269.1D Supplying and fixing of C.I. adopter which is to be connected to submersible pump delivery pipe.-100 mm dia

PSR CODE NO.31.271.1 Supplying and laying of 40mm dia. PVC pipe (Class 3 - PN 0.6 Mpa) conforming to IS 4985 : 2000 for inserting submersible cable from borewell to starter.

PSR CODE NO.31.273.1D Supplying,fixing and lowering into the borewell the GI pipes of medium class (TATA,TNT, Nezone,Apollo, Zenith) which are to be connected to the submersible pump,including labour charges,jointing materials etc.,complete.-100 mm dia

PSR CODE NO.31.274.1D Providing and fixing MS square threaded coupling (male and female thread) including necessary welding with 100mm GI pipe. -100mm dia.

PSR CODE NO.31.48.8B Providing and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 100 mm dia.

PSR CODE NO.31.48.1B Providing and fixing CI sluice valves (with cap) comprising to 7514846 and ISI marked with bolts, nuts, rubber insertion etc, complete (the tail pieces if required will be paid separately) 100mm dia

PSR CODE NO.31.130.1A Providing and laying in position flanged C.I. specials such as tees, bends, collors, tapers, caps etc.conforming to IS specification 1538 and ISI marked - 80 to 200mm dia.

PSR CODE NO.18.30.2 Providing flanged joints to double flanged C.I/D.I.Pipes and specials including testing of joints : 100 mm diameter pipe.

PSR CODE NO.31.137.1I Providing and fixing in position G.I. equal Tee (UNIQUE/R Brand/HB Brand/UI Brand)conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete- 100mm dia.

PSR CODE NO.31.147.1I Providing and fixing in position G.I. cap (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete - 100 mm dia.

PSR CODE NO.31.141.1H Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 100 mm dia.

PSR CODE NO.31.279.1A Erection, testing and commissioning of motor and pumpset complete.The rate includes obtaining electricity service connection from Electricity Department also.

PSR CODE NO.31.270.1 Supplying and laying of 16mm dia nylon rope for holding of motors.