SPECIAL REPAIRS TO BLDG NO T219 05 QTRS AND BLDG NO P 02 (08 QTRS) OR MD ACCN AT NP LINE OF ASC CENTRE SOUTH 2 ATC UNDER GE CENTRAL BANGALORE

Amount

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as directed.

Demolition of cement concrete in any position and any description complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as directed.

Demolition of brick work,precast concrete block walling or stone boulder masonry,built in cement mortar including all quoins, arches, pillars,etc,complete all as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

Taking up or down 20 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as directed.

Taking up or down 25 mm steel tubing and connections,including cleaning for refixing or removal to store complete all as directed.

Dismantling 500 lit water tanks,open or closed,hoisted and fixed in position complete all as directed..

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish of the MD Land complete all as directed by Engineer-in-Charge.

Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and Removing Rubbish of the MD Land complete all as directed by Engineer-in-Charge.

Demolition of Stone slabs and tiles of laid dry and pointed of any description or thickness in floors, aprons etc complete all as directed.

Taking down & refixing in shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as directed.

Taking down chowkhats or frames n.exc 1.5 Sqm (with out taking off shutters from the frame) complete all as directed.

Taking down chowkhats or frames exc 1.5 Sqm and n.exc 4 sqm (with out taking off shutters from the frame) complete all as directed.

Taking down shutters of any description n exc 1 sq. m each complete all as directed.

Demolition of drain/PVC pipe any dia including fittings complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S& F for Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as directed.

S &F for Pre- painted galvalume aluminum zinc coating (AZ 150) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding to wall,fixed with self tapping screws complete all as directed.

S&F for Pre-painted galvalume aluminum zinc coating (AZ 150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as complete all as directed.

S&F IInd class hardwood plain fillets (Exc 13 & n.Exc 25 Sqcm) square,rectangular or triangular in section,clean sawn,secured with nails complete all as directed.

S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2020 Part II. complete all as directed.

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2020 Part II. complete all as directed.

M&L Second class Hard Wood Plain, Solid, Straight chowkats and frames, framed, rebated on the solid, put together with glue , pinned at joints complete all as directed.

S&F Second class hardwood 35 mm thick glazed and skeleton shutters divided into squares open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) complete all as directed.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned andchemically pressure treated complete all as directed.

S&F 75 mm Butt hinges , medium weight, cold rolled, mild steel complete all as directed.

S&F 100 mm Butt hinges , medium weight, cold rolled, mild steel complete all as directed.

M&L for 18/19 mm Veneered particle boards interior grade,solid core,general purposes type,with face veneers of type 'BB' fixed with screws to timber frame work complete all as directed.

M&L for 0.90 mm decorative laminate type-1 of surface finish,colour and pattern as approved,fixed with approved adhesive as per manufacturers instruction complete all as directed.

S&F IInd class hardwood plain fillets (n.exc 13) square,rectangular or triangular in section,clean sawn,secured with nails complete all as directed.

S&F 30 mm Continuous (Piano) hinges,mild steel,bright finish or electrogalvanised complete all as directed.

S&F 2 lever locks,drawer grade I size 50 mm complete all as directed.

S&F 100 mm aluminium hasp and staple complete all as directed.

S&F 100 mm long aluminium anodised barrel towerbolts of extruded section and fixed complete all as directed.

S&F 100 mm extruded aluminium alloy handles fabricated type complete all as directed.

S&F Mild steel small articles conforming to Fe-290-0 grade-E-165. such as in hold fasts complete all as directed.

S&F 150 mm long aluminium anodised barrel towerbolts of extruded section and fixed complete all as directed.

S&F 250 mm long aluminium alloy,anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F 125 mm extruded aluminium alloy handles fabricated type complete all as directed.

S&F Stainless steel wire cloth 0.30 mm nominal dia of wire and average width of aperture 1.70 mm and fixed with stainless steel wire staples complete all as directed.

M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

S & F box type steel windows/ventilators double side shutters ie glass and wire mesh shutter, including pressed steel frames made out of CRCA sheet of 80X60X1.25mm thick double rebated, shutters box type made out of CRCA sheet of 40X20X1.0mm thick, 12mm square guard bar/grill welded to steel frame, window shutters side hung, ventilator shutters top hung, box type hinges, aluminium die cast handles for glass shutters, iron flat type handles for mesh shutters, telescopic stays etc complete all as specified in TD drawing No TD/539 dated 09.02.2004 of Chief Engineer Chennai Zone and as directed. NOTE:- (i) Qouted rate under this item shall deemed to be inclusive of steel frame, both side steel shutters, guard bars/grills, handles, stays, beading/fillets for fixing glass/wire mesh including cost elements for fixing of glass & wire mesh and mearurement/ pament shall be considered as one unit by comprising all these elements. (ii) Glass and wire mesh shall be measured and paid as supply only underseparately under respective item complete all as directed.

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately) complete all as directed. Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as directed.

S&F 4 mm thick figured glass,pin head type and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring,fixed in floor complete all as directed.

M&L for preperation of old steel surfaces and applying one coat of synthetic enamel paint complete all as directed.

M&L for type Bo,1:2:4 (12.5 mm graded aggregate) providing,cement concrete in roof kerbs or mud stops,rounded or chamfered on edges complete all as directed.

M&L for Rendering 10mm thick in CM 1:3 on roof. finished even & smooth without using extra cement complete all as directed.

Supply only water proofing compound complete all as directed.

M&L Rendering 15mm thick on fair face of brick work in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using WPC complete all as directed.

M&L Rendering 10mm thick in CM 1:6 on fair face of brick work or concrete surface finished even & smooth without using extra cement to walls complete all as directed.

M&L for rendering 10 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing complete all as directed.

M&L Rendering 5mm thick in CM 1:3. finished even & smooth without using extra cement to ceiling complete all as directed.

Applying bitumen primer @1.50kg/sqm and providing 3mm thick APP modified water proofing membrane weighing 3.0kg/sqm polymeric membrane incorporating centre core of 90 micron thick HMHDPE film with reinforced with non woven polyster matt weighing not less than 150gm/sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 kg/sqm top of membrane surface shall then be finished with solar reflective bituminous aluminium paint @ 0.10 kg/sqm including taking down of existing roof treatment any description complete all as directed.

M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of cement base paint over one coat of primer complete all as directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on walls complete all as directed.

M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of oil bound distember over 1 to 2 mm thick putty finish over a coat of primer complete all as directed.

M&L for Complete removal of existing treatment and applying two coats of oil bound distember over 1 to 2 mm thick putty finish over a coat of primer complete all as directed.

M&L for preparation of Newly Plastered surfaces of wall and applying Three coats of white wash complete all as directed.

M&L for complete removal of existing treatment and applying two coats of white wash on walls complete all as directed.

M&L Preparing Old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M&L for precast cement concrete block (Type C1 1:3:6 20 mm graded aggregate) masonry with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as directed.

M&L Pre cast RCC (1:2:4) type B1 for pre cast slab for cooking platform/man holes and set in cement mortar (1:6) complete all as directed.

M&L for mildsteel ,TMT bars 6 to 8 mm cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed.

M&L for Antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.in apron complete all as directed.

M&L for Antitermite treatment of soil under existing floors using emulsion @ one litre per hole,300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floors complete all as directed.

M&L for Machine cut cudappah stoneslab 20-25mm thick over cementscreed base, laid and jointedwith grey cement slurry mixedwith pigment to match the shadeof the slab including rubbingand polishing complete all as directed.

M& L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base of 15 mm thick cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

M&L for rounding to edges of stone slabs one edge,such as in steps,cooking platform,and other similar situations complete all as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement backing coat 1:4,15 mm thick and jointed with gery cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

M&L for 25 mm thick Granite work in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite lncluding rounding of edges complete all as directed.

M&L for 25 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) is used for levelling course complete all as directed.

M&L for Cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundation filling and mass concrete complete all as directed.

M&L for colouired joint free non-skid ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exc 0.38 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing including screed bed of CM 1:4,10 mm thick complete all as directed.

M&L for coloured nonskid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 Sqm,in floors etc..set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:4,10 mm thick complete all as directed.

M&L for Glazed Ceramic Coloured joint free tiles 350x250x 7mm/450x350x7 mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4.complete all as directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as directed.

S&F in Repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. including PVC Flushing cistern,PVC connection 450 mm and flush pipe, S or P Trap & Provision of concrete bedding and making good to floor complete all as directed.

S&F in Repair Vitreous China Wash hand basin , white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) including PVC connection 450 mm long complete all as specified & directed by Engineer-in-charge.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with piugs,washers and wastes,including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,over all size 495 mm x420 mm bowl size 410 mm x 330 mm x 160 mm complete all as directed.

S&F in repair 15 mm stop valves,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repair 15 mm Bib taps,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F in repair 15 mm bore stop valves,cast copper alloy,fancy type,chromium plated with long shank ( Concealed type) and cup washers complete all as directed.

S&F in repair 15 mm Swivel brass chromium plated shower rose 125 mm size with shower arm complete all as directed.

S&F in reapair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190 gms) complete all as directed.

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as directed.

S&F for PVC Connections 15 mm size with PTMT nuts of length 450 mm complete all as directed.

S&F in repair 20mm dia brass Ball valve complete all as directed.

M&L for 75 mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as directed.

S&F 110 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as directed.

S&F 110 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as directed.

S&F 75 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as directed.

S&F 75 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as directed.

S&F 75 mm PVC (SWR) branch piece,double (double Y) equal orunequal complete all as directed.

S&F PVC (SWR) bends 75 mm with access door complete all as directed.

S&F PVC (SWR) bends 110 mm with access door complete all as directed.

S&F PVC (SWR) junction single,(single T) 110 mm with access door complete all as directed.

S&F 110 mm PVC (SWR) vent cowl complete all as directed.

S&F 75 mm PVC (SWR) vent cowl complete all as directed.

M&L for PCC 1:3:6 type C1 using 40mm graded aggregate of 75mm thick as in Plinth Protection complete all as directed.

Dismantling framed fillets,rails,posts,rafters,purlins,etc under 40 Sqcm in section complete all as directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as directed.

S & F 1.00 mm thick plain,galvanised,mild steel sheeting on doors complete all as directed..

S&F for welded steel wire fabric supplied and fixed complete to wood or steel members n.exc 4 kg/Sqm complete all as directed.

M&L for preperation of new steel surfaces and applayingtwo coat of synthetic enamel paint over a coat of red oxide,zinc chrome complete all as directed.

Dismantling wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards/slabs/blankets,any thickness,including cover fillets complete all as directed.

S&F Anodised aluminium snap grid frame work for false ceiling including hangers complete all as directed.

M&L for 12 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as directed.

S&F stainless steel curtain bracket 25 mm dia including wooden support complete all as directed.

S&F stainless steel 25 mm dia metalic coated curtain road with ring complete all as directed.

S&F kitchen plate rack of specified size complete all as specified and directed by Engineer-in-Charge.(Size :600 x 750 x 25 mm )

S&F rotational moulded polyethylene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia float valve and HDPE 25 mm wter tank nipple complete all as directed.

Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as directed.

S&F 160 mm wide and 100 mm depth rain water gutter of UPVC 3 mm thick sheet,including all necessary fittings complete all as directed.

M&L for 75 mm thick Cement concrete type D-2,1:4:8 (40 mm graded aggregate) is used for sub base of flooring complete all as directed.

M&L for chequered cement concrete tiles of 30x30x25 mm thick,with grey cement and pigments set,jointed and pointed in neat cement slurry in floors including screed bed of cement mortar 1:6 ,20 mm thick complete all as directed.

S&F in repair 25 mm Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as directed.

M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre complete all as directed.

M&L for PVC (SWR) gully trap 125/110mm,setting and joining with solvent cement complete all as directed.

Raking out joints / pointing to squared rubble masonry,coursed or uncoursed complete all as directed.

M&L for flush pointing to squared rubble masonry,coursed or uncoursed using cement mortar 1:4 complete all as directed.

M&L for precast cement concrete in Kerb stone using Type C1,1:3:6 (20 mm graded aggregate) set in cement mortar 1:6 complete all as directed.

M&L for cement concrete (1 :4:8) type D-2,75 mm thick is used for subbase of flooring complete all as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as directed.

Supply only Fine aggregate (Sand) for concrete/Cushion for Machine pressed precast concrete interlocking paver tiles complete all as directed.

M&L for excavation in trenches n. exc 1.50 m wide and n.exc 1.5 m deep and taking out in fdn in soft/ loose soil complete all as directed.

S&F Underground Double wall Corrugated (DWC) pipe,150 mm nominal size (ID 148.50 mm & OD 172.50 mm ),SN-4 in any length,with rubber ring joints including all fittings, conforming to IS-16098 (Part-2),laid in trenches and testing on completion complete all as directed.

M&L for PCC 1:3:6 type B2 using 40mm graded stone aggregate in foundation concrete as in foundation filling complete all as directed.

M&L concrete ( 1 : 3 : 6) type C-2 to drain pipes including packing under haunching against sides for 150 mm dia pipe complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as directed.

Demolition of brick work,precast concrete block walling or stone boulder masonry,built in cement mortar including all quoins,arches,pillars,etc,complete all as directed.

M&L for Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as directed.

M&L Rendering 15mm thick in CM 1:4. finished even & smooth without using extra cement to walls complete all as directed.

M&L for returning filling of soft/loose soil in including spreading,levelling,watering and well ramming in layers n.exc 25 cm complete all as directed.

M&L removing excavated soil exc 250 m and but n.exc 500 m and depositing where directed complete all as directed.

M&L cement concrete 1:2:4 type B 2 (using 20mm graded coarse aggregate) as surface channels and drains complete all as directed.

M&L for cutting 150 mm pipe into existing manholes for connecting new drains,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished,and reforming benching as required complete all as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as directed

M&L for complete removal of existing treatment on ceiling and applying three coats of white wash complete all as directed

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as directed.

Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor FRLS 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic grey conduit on surface conforming to IS-9537 with all accessories including PVC/MS terminal boxes fixed on wall with 3mm thick masonite laminated sheet top cover fixed with steel screws for mounting switches, sockets, regulator etc including FRLS 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :-

(a) One light/fan point controlled by one 5 Amps switch one way

(b) One bell point controlled by one switch

(c) One 3 pin socket point 5 Amp on independent board

(d) One 3 pin socket point 5 Amp on same board with other switches.

All same as per item No Serial No 144 here-in-before but with FRLS 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with FRLS 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as directed.

M&L, Switch piano, flush button single pole, 5 Amps one way complete all as directed.

S&F Switch socket combination flush type 5 Amp 2 in 1 complete all as directed.

S&F Switch socket combination flush type 5/16 Amps5 in 1 complete all as directed.

Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC square blocks complete all as directed.

S&F switch bell push button single pole 5Amps 230 volt one way complete all as directed.

S & FBuzzer, Ding Dong AC. 230 volts, single pole complete all as directed.

Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as directed.

S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : CAT Part No. LDL-20-WW of Crompton or equivallent model in Shakti/Bajaj.

S&F in replacement LED tube light fitting of 10 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : CAT Part No. LDL-10-WW of Crompton or equivallent model in Shakti/Bajaj.

S&F inrepair bldg security light light fittings 1x 15 Watt LED street light with cast aluminium housing, toughened flass diffuser, IP65/66 and wired with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed. Make Shakti/Bajaj/phillips/CG

S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one complete all as directed.

M&L for Sub main wiring with 2 runs of FRLS 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor FRLS Cable as continuos earth wire dolly and connecting to existing main switch board / distribution board of the building as ordered and testing on completion including taking down old submain wiring and type of conduit ccomplete all as directed.

S&F Sheet metal enclosure (ISI marked) acrylic distribution board for TPN 6 way (8+18), 415 V TPN Acrylic DB, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. Make Polycab Ct No GPDTN30008 and equivalent make of ABB/Siemens/L&T

S&F in replacement Sheet metal enclosure (ISI marked) Acrylic distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. Make Polycab Ct No GPDSN30008 and equivalent make of ABB/Siemens/L&T

S & F MCB single pole 6 to 32 Amps 240 volts, C Curve, 10 kA rupturing capacity providing in DB complete all as directed. Make Polycab/ABB/Siemens/L&T

S & F MCB single pole & neutral 6 to 32 Amps 240 volts, C Curve, 10 kA rupturing capacity providing in DB complete all as directed.. Make Polycab Ct No GMM201N006 and equivalent make of ABB/Siemens/L&T

S & F MCB Four Pole 63 Amps 415 volts, C Curve, 10 kA rupturing capacity providing in DB complete all as directed. Make Polycab Ct No GPDSN30008 and equivalent make of ABB/Siemens/L&T

Supply and fixing of single phase meter thermoplastic box of size 250 x 250 x 155 mm, Fixed on PVC box Model GSMB of Make - Sintex or equivelent.

Taking down ceiling/exhaust fan dismantling and painting of ceiling/exhaust fan complete at site with synthetic enamel paint by spraying incl (fittings with filler) one coat after cleaning all dust etc incl connecting up. Provn of twin core cable of suitable size for ceiling rose to connector connecting of earth wire incl replacement of fan capacitor 2.5/3.15 MFD,canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greassing in fan bearing & refix same complete all as directed

Rewinding of ceiling fan with appropriate size of copper enamelled wire including varnishing ,heating with proper insulation complete and testing complete all as directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long including protection pipe 25mm bore medium grade and watering pipe by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including testing and dismantling of old earthing complete all as directed.

ADWITHI

PRACHANIVA CONSTRUCTIONS

Vinayaka Enterprises

Srisrinivasaenterprises

K. VENKATESH NAIDU

SAI CONSTRUCTIONS