Focus Block Development Programme (FBDP) 2025-2026 Tender Notice

Amount

AC Sheet Roofing without roof timbers including all materials conveyance and all labour charges etc., complete

Dismantling Plain Cement Concrete including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Cement concrete 1:4:8 mix (One cement four M sand and eight aggregate) using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges including mixing, laying consolidating and curing etc., complete as per standard specification - 10m³

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 mix (One cement and five sand) to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and Fixing of polyurethane foam for Slopedroofas thermal insulation panels or Sandwich insulatedpanels with external 0.50mm total coated thicknesspre painted Galvalume sheet with trapezoidal roofingprofile having crest height of 38mm at every 333mmspan , whereasinternal0.50mm total coated thicknesspre painted galvanized iron sheet with micro ribbedprofile and the insulation material will be chlorofluorocarbon and hydro chlorofluoro carbon free , highperformance rigid polyurethane foam (PUF) conformingto IS 12436 having density not less than 40±2Kg/M3,Thermal conductivity (K-Value) 0.024 W/m.K measuredat 10 degree Cmeantemperaturealongwithnecessaryflashings such as L flashing, C flashing etc& accessoriessuch as screws ,fastners ,sealants etc for fixing the paneletc., complete complying with standard specification.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supply and fixing of cuddapah slab 40 mm thick including cost and conveyance of all labour charges etc

Painting two coats with best approved quality of enamel paint over one coat of priming for new iron work including all labour charges etc., complete as per standard specification

Painting two coats ready mixed Approved Exteriar Emulsion of first quality and of approved colour over a primingcoat including through scarbing clan removel ofone coat of priming with best Cement paint as directed by the department officers etc complete and including necessary plaster of paris whever regd.(S.l.No.358) -10sqm

Cuddapah Slab Sink of size 600mm x 600mm x 200mm with 32mm dia ‘B’ Class G.I. waste water pipe & 32mm dia C.P. waste coupling.

Balaji (BID ID -1527374)