MLACDS-2025-26

Amount

Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick well rammed and consolidate and depositing the surplus earth in all places shown by the departmental officers with initial lead and lift etc., complying with standard specification asperSS20 B.

Filling with the gravel inculuding cost and conveyanace of all matrialase to site and all labour charges etc complete

Plain Cement Concrete 1:4:8 Using 40 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification.

Brick work in Cement Mortar 1:5 (one cement and five sand ) using Country Bricks ground molded of size 22x11x7 cm. Including cost and conveyance of materials to site and all other labour charges as per standard specification.

Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification.

Centering shuttering including necessary support for plane surface in Foundation and Basement and in all floors using mild steel sheets of size 90x60 cm and 10 gauge stiffened, welded with steel angles of size 25mmx25mm x3mm for boarding laid over silver oak (country wood) joints of 10cm size x6.5cm size spaced at about 90 cm center to center and supported casuarina props of 10 cm to 13 cm dia spaced at 75 cm center to center complete complying with standard specification.

Supplying fabricating and placing in position mild steel or ribbed steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification

Reinforced Cement concrete 1:11/2:3 using 20mm, gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams etc. shall be finished smooth with CM 1:3 12mm thick and with kraft paper without claiming extra etc. as directed by the Departmental officers complete complying with standard specification.

Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the proportion being brickjelly to lime 32:12:1/2 by volume and laid over in to a single layer and consolidated to the required design and finished thickness beating type concrete with wooded beaters keeping the surface constantly welted by sprinkling lime jaggery water as per standard specification etc., complete as directed by the departmental officers.

Finishing the top of roof with one course of Machine Pressed Tiles of size 20 cm x 20 cm x 2cm of approved quality laid in CEMENT MORTAR 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., complete complying with standard specification.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum

Plastering in CEMENT MORTAR 1:3 10mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.

Plastering in CEMENT MORTAR 1:5 12mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.

Paving the floor with scratch proof Ceramic Tiles of any colour and any size laid in cement mortar 1:2 (one cement and two sand) 20mm thick and pointing with white cement using 0.4Kg/Sq.m. mixed with colouring pigments to suit the colour of the tiles including finishing the joints neatly complying with standard specification and as directed by departmental officers

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

supply and Delivery of steel door inculuding cost and conveyance of all matrialse to site etc

Door D 0.75 x 2.10

Door D1 1.00 x 2.10

Door D2 1.10 x 2.10

Window 1.20 x 1.30

RCC jolly J1 0.90 x 0.45

Ventilator 0.90 x 0.45

Labour charge for fixing steel door with frame in position etc. complete (finished work) and as directed by departmental officers

Door D 0.75 x 2.10

Door D1 1.00 x 2.10

Door D2 1.10 x 2.10

Window 1.20 x 1.30

Ventilator 0.90 x 0.45

Painting two coat over old wall surface with approved quality of Oil bound distember with colour mover okne coat of white cement for priming coat for base including preparation of old colour washing surface and all materials, labour charges etc

Painting two coat of Plastic emulsion paint over wall plastering surface with best approved first quality of approved colour over the one coat of priming etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works )

Painting TWO coat of enamal paint new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specification. (The paint should be got approved by the departmental officers before use on works)

Supply and delivery of Folllowing Sanitary PVC Pipe line arrangements for ISI marks as of all charges etc Complete

110 mm PVC Pipe

110 mm PVC Elbow

110 mm PVC Tee

110 mm PVC Cowl

Provision for Electrification arrangements

Light point SD18

C F L Bulb with Cover

Fan Point SD 18

Supplying & Fixing of Fan SD 107

Plug Point SD 36

Tube light Fitting SD 88

16 A DPIC Switch SD 150

2*1.50sqm Service Wire SD 64

Cost and supply of fixing cuddaph slab 50mm tk

Supplying & Fixing EWC including all cost & conveyence

Supplying & Fixing Baby IWC including all cost & conveyence

Providing Water Supply Arrangements (Sub Estimate -1)

Supply and delvery of PVC pipe in Water Supply arrangements of all etc

25mm PVC Pipe

25mm PVC Elbow

25mm PVC Tee

20mm PVC Pipe

20mm PVC Elbow

20mm PVC Tee

25mm PVC Tap

20mm GM Gatevalve

Supply and fixing Sintex Water Tank 1000 Lit Capacity

Supply and Fixing Mono Black 1Hp Motor including cost and conveyence

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Thangam (BID ID -1442175)