SPECIAL REPAIRS TO ROOF BLDG NO T 188 AND SPL REPAIRS TO ROOF AND BATHROOMS OF BLDG NO P 327 WARD ROOM AND IMPROVEMENT TO NCN ROOM AND SIMULATORS AND IMPROVEMENT TO VISITORS ROOM IN MAIN ADMIN BLDG AT INS SHIVAJI LONAVLA

Amount

Taking down asbestos cement (corrugated ,semicorrigated ,etc.) sheets in roof covering.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with L-type or J-Type or cranked hook bolts complete all as specified

S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with L-type or J-Type or cranked hook bolts complete all as specified

M&L filleting in CM 1:4 in any shape sectional area exc 25 Sqcm but n.exc 50 sqcm

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F plates(plain or chequered) channels,square cut or notched (ordinary and counter shunk forming holes,without any attachement. All as specified and directed by Engr-in-Charge

S&F trusses (framed), trussed, purlins, crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming Fe 410-W (Gde-E-250) quality-A

S&F wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

Demolition of cement concrete (unreinforced) of any description and in any position complete

M&L for PCC 1:2:4 type B0 (12.5mm graded agg) as in roof kerbs coving over chajjas and similar locations rounded or chamfered on edges.

Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with sub class B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, forming toothing for, and bonding new into old brickwork /stone masonry

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces and finished even and smooth without using extra cement on walls

Supply integral water proofing compound.

Preparing new surfaces, plastered or unplastered surfaces of walls and applying three coats of white washing

M&L for Preparing newly plastered surface and priming with alkali resistant priming paint and applying 2 coats of antifungal weather proof paint exterior grade emulsion paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire burshing, and applying two coat of white wash on the walls, pillars, cornices etc complete all as specified and directed.

M&L for preparation of old painted surfaces of wall and applying one coat of exterior grade, weather resistant antifungal acrylic latex paint complete all as specified and directed.

Preparing new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide

Preparing old steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint complete.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

S&F 160mm dia PVC half round pipes as in rain water gutters, incuding all fittings such as joints brackets, running outlet, elbows with or without outlets, stop and outlet, end caps etc fixed to roof with suitable top or side brackets all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia bore all as specified and directed.

S&F (SWR) pipes single socketed 110mm bore in any length with rubber ring joints as in rain water carrying pipes with all pipe fittings such as bends, elbows, unions, brackets, sockts, plugs, hose clips etc fixed to walls complete all as specified and directed.

S&F Mild steel work in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay): heavy, for large gates: hook and pintle hinges; large hasp staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to trusses or rafters ; knee pieces inserts ; two way and three way straps' plate washers and similar small articles conforming to Fe-290, Gde-E-165

Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortor complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 8mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4

M & L for Machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as flooring all as specified and as directed

M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and smooth with WPC all as specified and as directed (Note : WPC will be measured and paid separately)

M&L for preparation of new plastered surface of ceiling surface and applying three coats of white wash etc all as specified and directed.

M&L for preparation of old surface by complete removal of existing treatment and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75 mm internal dia pipe complete all as specified.

S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..

S&F PVC (SWR) bends of 110 mm dia bore with access door

S&F PVC (SWR) junction double (double T) equal or unequal for 110 mm dia

S&F PVC (SWR) bends of 75mm dia bore

M & L PVC Nahani trap100mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)

S&F in repairs two piece EWC 680x360x765mm white, with seat cover and Twin flushing cistern complete all as specified and directed by Engr-in-Charge as per CERA -CAT No. S1021103 S Trap 230mm, CAT No S1060101 Cistern, CAT No B1510101 seat cover, CAT No B1810101 Twin Flush fittings or equivalent of Johnson/ Parryware/ Neycer all as specified

S&FVitreous China urinal, coloured of size 265x335x695mm large flat back with all fittings accessories including discharge pipe and taking down the existing one. Make Cera – CAT No.S4020105 for urinal and self closing angle cock press matic for urinal wall flange and 200mm CP connecting pipe Cera – CAT No.F9020203

S&Fin repairs vitreous china wash basin, white, counter type of size 550 mm x 460 mm including waste fittings, brass chromium plated with long screwed shanks and fly nuts including cutting for and pinning in ends of brackets, 32mm bore flanged end bedded in red lead cement and other end fixed with complete all as specified and directed. Cat No :- S 2030125 of Cera or equivalent model manufactured by Neycer/Parryware.

S&F Pillar tap with aerator, cast copper alloy with capstain heads, chromium plated, fancy type, screwed down with high pressure, with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore dia of pipe. Make Cera – Cat No.F1099101 or Equivalent

S&F in repairs two way bib cock brass chromium plated, fancy type complete all as specified and as directed. Cat No:- VGP-CHR-81041 of Jaquar or equivalent Model Manufactured by Esess/ Marc.

S&F in repairs angle cock brass chromimum plated fancy type complete all as specified and as directed. Cat No - OPP CHR 15053 PM of Jaquar or equivalent Model manufactured by Essess/Marc.

Supply and fixed in repair 15 mm bore chromium plated hot and cold wall mixer all as specified and directed. Make Cera Cat No F 3002401 or equivalent

S&F Brass chromium plated overhead shower rose 120 mm dia with 3 flow with swivel joint, including shower arm, fixing to steel pipe or union including taking down old shower rose complete all as directed and specified by Engr- in- Charge. Make Cera shower rose F7020305 shower arm F7040104 or equivalent in Hindware/ Parryware.all as specified and directed

S&F in repairs hand shower (Health Faucet), chromium plated with 8mm dia, 1.00m long flexible tube with wall hook all as specified and as directed. Cat No:- ALD - 573 of Jaquar or equivalent Model Manufactured by Esess/ Marc.

S&F in repairs brass chromium plated, bottle trap (with internal partition) 32 mm size with 250 mm long wall connection pipes & wall flange complete all as specified and as directed. Cat No:- ALD-CHR-7691 of Jaquar or equivalent Model Manufactured by Esess/ Marc.

S&F in repairs soap dish brass chromium plated complete all as specified and as directed. Cat No:- CAN CHR-113IN of Jaquar or equivalent model Manufactured by Esess/ Marc.

S&F in repairs toilet paper holder complete all as specified and as directed. Cat No:- ACN-CHR-1151N of Jaquar or equivalent Model Manufactured by Esess/ Marc.

S&F in repairs towel rail 600 mm long of brass chromium plated fixed with & including chromium plated brass screw complete all as specified and as directed. Cat No - CAN CHR 1111 NM of Jaquar or equivalent Model manufactured by Essess/Marc.

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

Taking up or down steel tubing 15 mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 25mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 40 mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F CPVC pipes, SDR 11, 40 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

S&F in repairs High density polythylene (HDPE) pipes 50 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed.

M&L for plain cement concrete type C-2, 1:3:6 (40 mm graded aggregate 75 mm thick as as in plinth protection complete all as specified.

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame.

S&F 8 mm thick toughened glass of any size (plain or frosted) fixed with necessary patch fitting , glazing clips, aluminium beads, rubber gasket etc complete all as specified and as directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides with and including 1.5 mm thick decorative laminate on both sides fixed with adhesive complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F brass handles, cast type, 125mm size complete all as specified and directed.

S&F brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed, 150 mm size complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm size.

S&F brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolts with rolled or drawn brass bolts and fixed, 250mm length complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

M&L for Machine cut green marble slab, 18-20mm thick, single piece in full length of window cill/jamb over and including cement mortar screed/backing coat, 15 mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

Supply and fix aluminium powder coated fixed type ventilator without sash bar, centre to centre distance of horizontal members not exc 60 cm & vertical members not exc 45 cm with 4 mm thick plain sheet glass,rubber packing with & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed (i) Frame (SP) -20052 (ii) Frame (DP) - 20051 (iii) Glazing clip - 19352

S&F Second class clean sawn hardwood in scantling fixed in timber framed work for cupboard frame all as specified and as directed.

M&L rendering 15mm thick in cement mortar (1:4) as in roof using water proofing compound including necessary scaffolding etc complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately.

M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- (a) Apply one coat of bituminous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 4mm thick with non woven polyster reniforcement weighing not less than 4.00 Kg/Sqm applied by torch application method. (d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (e) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm.

M&L for cutting ,grooves or rebates n.exc 15cm girth and triming surface for inserting pre-painted galvatume sheet with or without reinforcement.

S&F Cast iron work grade FG 150, unmachineed, in brackets, gully traps, gratings, railings, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each

Taking down steel/aluminium windows/ventilator of any size with all fittings complete

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqcm with shutter (without taking of shutter from the frame.

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match.over and including 20 mm thick screed bed in CM 1:6

Ditto all as per item No. 86 above but in skirtings /dado and verical surfaces over and including 10 mm thick backing coat cement plaster in CM 1:4

S & F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

S&F 12mm thick toughened glass doors of any size and design with suitable stainless steel patch fittings, locking arrangement, floor springs and 02 Nos 300mm long matt finish handles including necessary acid wash/ itching complete all as specified and as directed.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

S & F 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, with commercial face veneers.

S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws.

S&F aluminium handles cast type anodised 150mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

Cutting holes in brick wall or stone walls built in cement mortor for inserting hold fast and making good the disturbed portion in cement mortor 1:3 or cement concrete (1:2:4), type B1 as requried for depth of embedded portion of hold fasts or lugs measured from the face of the Jamb into the wall exc half brick & N.exc one brick all as specified and as directed.

Taking down and Refixing door shutterswith chowkat in other openings exc 2sq. m each complete all as specified.

S&F Mild steel TMT bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to

All as per Item No 98 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for reinforced cement concrete type B-1, 1:2;4 (using 20mm gradual aggregate) as in beams

Form work to sides and soffits of floor or roof beam, beam haunchings, griders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc for flat surface of concrete finished smooth

M&L for rendering 5mm thick on fair faces of brickwork or concrete surfaces finished fair and even in CM 1:3 in ceilings and slabs

M&L 75mm thick plain cement concrete 1:2:4 type B2 (using 40mm aggregate) as in flooring using metallic hardner 5% wgt of cement finished even and smooth complete all as specified and as directed

M&L for preparation of new or previously untreated wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer

M&L for Preparing newly plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed.

Taking down aluminium door/partiton of any type & size with all fittings complete

M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.

Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

S&F 18mm thick Pre-laminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F Auto Closing concealed hinges fixed to panels in cupboards.

S&F Extruded Brass handles, fabricated type polished 125mm size.

S&F extruded section brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts fixed to cupboards of 100 mm size.

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including setting and fixed

S&F Cupboard locks of 75mm size

S&F mild steel screw bolts 16 to 20mm dia (machine made) with heaxognal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n.exc 22.5cm long complete all as specified and as directed.

Cutting holes into stone walls/block masonary built in cement mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2;4 type B-1, the opening should exc 150sqcm but n.exc 400 sqcm.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping ..

Dismantling wrought iron or mild steel work of any description not otherewise provided for

S&F Steel work in MS tublar sections/Structural trusses, MS Square Tube & Joists /MS angle as columns / rafters including special shaped washer etc complete using ERW or indication butt welded tubes confirming to I.S 1161-1998 grade St-240

S&F rolled mild steel in joist, channel, angle, Tee section or tubular section fixed independently as in Post, Purlins, Rafters etc without connecting plates etc conforming to Fe-410W (Gde E-250) quality-A complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

Dismantling of existing water proofing treatment consisting of cement mortar, concrete tarfelt and foreign materials etc including cleaning the surface and removal of dismantled materials outside MD land complete all as specified and as directed.

S&F 12mm thick toughened glass of any shape and size (Plain or frosted) I panels fixed with glazing clips, aluminium beads, rubber gasket etc and aluminium powder coated frame complete all as specified and as directed.

M&L for cutting holes into pr thorugh cement concrete slabs ,chajjas etc reinforced or superficial area Exc 100 sqcm but N.exc 250 sq cm.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for issue under Schedule of credit and making good disturbed surfaces of walls, floors, etc.

Taking down MCB DBs / SFUs

M & L for point wiring with 1.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover / PVC Switch Board mounted on wall for mounting the switches , socket outlets , fan regulators etc all as s specified and directed for one light fan point controlled by one switch

All as per Item No 146 but One socket 3 pin outlet 5 amp on independent board.

All as per Item No 146 but One 3 pin socket outlet 5 amp on the same board board with other switches.

All as per item No 146 but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm.

S&F in repairs switch socket combination 2 in 1, 3 pin 5/15 amp flush type. .

S&F in repairs switch socket combination 2 in 1,5 amp flush type.

S&F in repairs socket outlet 2 in 1, 3/5 pin 5 amp multi purpose, flush type.

M&L for replacement of lamp holder, insulated body with back plate batten/angle type for batten fitting complete all as specified & directed.

Supply and fix new adore LED lamp 15 Watt confirming to Cat No LHLDERUEMD8X015 of Havell's or euivalent in Philips / Bajaj

S&F in repairs LED Tube light 18 Watt LED complete set prewireed upto terminal block complete with all accessories and connecting up with twin core / .0076 flexible copper wire with and including LED tube light fixed on two nos PVC round / square mounting blocks complete all as required at site and as directed by Engineer -in-Charge. Make : Cat No for Batten-BLRB DB 118, and for LED Tube Rod Cat No BLRB 18W CW LED of Bajaj or equivalent of Havell's/Philips / Wipro

Supply and fix in replacement of LED Tube light of 10 watt (2") with batten integrated channel complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.Make:Bajaj CAT Part No BCLSB 10 NW (2ft) or equivalent to CG/Philips/Wipro complete all as specified and directed .

S&F in replacemen MCB DB SPN 8 ways double door with 240 Volt, 100 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed

S&F in repairs MCB SPN 35-63 amps, 240 Volts, Complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 amps single pole 240 Volts, Complete all as specified and directed.

Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to disturb surface of wall and match with the existing surface.

M&L for sub main wiring drawing through PVC casing and capping with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed. Note:- Three run of 4 sqmm wire and One run of PVC casing caping will be measured as one running meter.

M&L for earthling complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition.

M&L for making hole in wall of size 300 mm dia to 450 mm dia for mounting of exhaust fan, making good the disturbed surfaces to match the existing complete all as directed by Engineer-in-Charge at site

Supply and fixing Enclosures 2 mod Metal suitable for one SPN MCB complete all as specified and as directed ,Make -Indoasian Cat No- 811980 or Equivalent to Legrand/Havellscomplete all as specified and as directed.

Supply and fixing in replacement of MCB signle pole and neutral upto 63 Amp 230 volts 'C' series complete all as specified and as directed.

M&L for Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and as directed.

Supply & fix exhaust fans AC single phase 230/240 V of size 300 mm sweep with louver including taking down

S&F indoor LED tubelight fitting with battern for LED tube light (1x20 Watt LED) surface/ pendant mounting LED prewireed upto terminal block complete with all accessories and connecting up with twin core/ .0076 flexible copper wire with and including LED tube light fixed on two Nos PVC round/ Square mounting block complete all as specified and directed. CAT No BCLAB 20W for Batten and BCLAB 20W CW for tubelight of Bajaj or equivalent of Philips/Wipro. Note : Rate to two Nos suspension links not exceeding 2.5 mtr long if required is deemed to be including in the quoted rate of the item.

M/s S.D Construction Co

RK AND SONS CREATION