CA NO GE(W)/HSR-13/2025-26 COMPREHENSIVE REPAIR TO CERTAIN B/R AND E/M ITEMS IN DOT AUDITORIUM AND OFFR MESS OF ZONE A UNDER AOR OF AGE B/R-II OF GE (WEST) HISAR

Amount

Repairing of Damaged external Grit Wash Plaster Finishes M&L for careful removal of loose, damaged, or deteriorated grit wash plaster from external wall surfaces including cleaning of substrate , followed by surface preparation which includes application of epoxy resin bonding agent as approved by Engr-In-Charge. and 15mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing with brushes and water to expose the stone chippings to match the existing finish in texture, color,, pattern complete all as specified and directed. Notes :- 1 the quoted price is inclusive of providing grooves as per existing pattern 2 Curing of plastered surface shall be carried out for the required period as per standard specifications. 3 All necessary scaffolding for height upto 18 m, safety precautions, and site cleaning post-work is included in quoted price.

Repair of Steel Roof Sheet Leakage Using Self-Adhesive Butyl Rubber-Based Waterproofing Tape Identifying and sealing leakage points on existing steel roof sheets using high-performance self-adhesive butyl rubber-based waterproofing tape of width 50 mm (or as required based on site conditions) and thickness 1mm . This includes sealing of overlaps, bolt holes, joints, and cracks to ensure long-term water resistance and protection against weathering complete all as specified and directed. procedure : 1 Visual inspection and identification of leakage-prone areas. 2 Cleaning of the surface to remove dust, rust, oil, or loose particles for proper adhesion. 3 Application of self-adhesive butyl rubber-based waterproofing tape with aluminum foil or UV-resistant laminate backing. 4 Pressing and smoothing to ensure full contact and sealing. Notes :- 1 Tape shall be suitable for external exposure with resistance to UV, temperature variation, and aging. 2 the quoted price are inclusive of appropriate safety equipment and access arrangements for roof height of 12-20 m 3 Butyl rubber-based waterproofing tape shall have excellent adhesion to metal surfaces ,weather resistance,Minimum 5-year service life under standard conditions 4 Application to be done as per manufacturer’s guidelines. 5 Workmanship should ensure watertight integrity and visual neatness. 6 Safety compliance for working at height 13-18 must be ensured.

Replacement of ACP Sheets Including Silicone Joint Filling in patches The careful removal of existing damaged ACP sheets, preparation of the surface, and installation of new 4mm thick ACP sheets of matching size, color, thickness , and finish and complete all as specified and directed. Notes :- the quoted price is deemed to be inclusive of (a) proper alignment and securing of panels using suitable mechanical fasteners and framing members, ensuring structural stability and aesthetics. (b) Post installation, all vertical and horizontal joints between panels shall be filled with high-performance, UV-resistant, weatherproof silicone sealant in a matching or specified color to ensure a watertight and dustproof finish. (c) All necessary tools, equipment including scaffolding for height upto 18 m , consumables, safety gear, and skilled labor . Workmanship must comply with relevant industry standards and manufacturer’s installation guidelines.

Replacement of Acrylic Carpet in Floors M&L for removal of the existing worn-out or damaged acrylic carpet from the floor , prepairing the surface and laying the new high-quality durable, wear-resistant, sound-absorbing, and suitable for high-traffic areas acrylic carpet of thickness 4-6 mm , weighing minimum 400gm/sqm with base of 4-6mm thick foam sheet approved shade, texture, and design complete all as specified and directed. Note : 1 Ensure a uniform and cushioned surface prior to carpet installation.the quoted price are inclusive of necessary cement slurry, screed bedding to ensure proper bonding and smooth finishing for laying foam sheet and acrylic carpet. 2 The new acrylic carpet and foanm sheet shall be laid using approved adhesives, ensuring wrinkle-free and tight fitting, with neatly finished edges and joints. T. 3 The quoted price are inclusive of all materials, adhesives, skilled labor, tools, and equipment required for the complete execution of work

Replacement of Mineral Fibre Ceiling Tiles M&L for the carefully removal of existing dirty, stained, broken 20 mm thick mineral fibre ceiling tiles of appx size 600x 600mm installed at a varying height upto 15 meters, and replacing them with new mineral fibre ceiling tiles of the same size, thickness, texture, and finish without disturbing the existing suspension/grid framework but including of cleaning the grid system and fixing new tiles in alignment with the existing framework complete all as specified and directed. Note : - (a) The quoted price is deemed to be inclusive of making precise cutouts in the tiles for accommodating AC ducts, light fixtures, sprinkler heads, speakers, or any other ceiling-mounted services, as per site requirements. (b) The tiles shall be fire-resistant, acoustically rated, and conform to relevant IS/ASTM standards. (c) All scaffolding, access platforms, labor, tools, materials, and safety measures necessary to perform the work at a height upto 15 meters shall be included.

Replacement of existing pvc panels with Hollow PVC Fluted/ louvers Wall Panels M&L for carefully removal and disposal of existing wall panels, if any, from the designated surface areas, followed by the supply and installation of decorative hollow PVC fluted wall panels, minimum 10 mm thick, as per the approved design and finish. The new fluted panels shall be factory-made, rust free , water resistant, easy to maintain ,hollow-core PVC panels with integrated fluted/ribbed texture, pre-finished in approved shades (woodgrain, matte, glossy, or metallic) and shall be: Note : the quoted price is inclusive of :- (a) Providing and fixing a suitable framework (if required) using aluminum/wooden battens for alignment. (b) Installation of hollow PVC fluted panels using approved adhesive or concealed fasteners. (c) Cutting, trimming, and edge finishing around electrical fittings, corners, and architectural features. (d) Supplying and fixing all necessary accessories like edge trims, corner profiles, and joint covers. (e) Cleaning the entire surface after installation and handing over the completed area. (f) Contractor shall provide all necessary tools, scaffolding, safety equipment, and materials. (g) Workmanship must ensure smooth, level, and aesthetically uniform finish.

Repair to Existing Fixed Chairs M&L for the repair and restoration of existing fixed-type chairs in auditorium hall , where the chair legs are either broken, misaligned, or detached from the flooring. The scope involves thorough inspection and identification of defective chairs, followed by: 1 Straightening or re-aligning bent/damaged legs, 2 Welding of broken iron/steel components using arc or gas welding as appropriate, 3 Re-fixing legs to the floor by removing old or damaged grout/screws, 4 Drilling and anchoring new fasteners/screws or anchor bolts with suitable strength and durability, 5 Filling damaged floor holes using epoxy-based compound for anchoring where required, ensuring strong bonding and level surface, 6 Providing new iron members, brackets, washers, or support pieces upto 10 kg for each chair wherever the existing parts are missing, deformed, or beyond repair, 7 Painting/touch-up of welded parts with anti-rust primer and matching finish coat as required for aesthetics and protection. the quoted price is inclusive of All necessary tools, welding equipment,materials, consumables, safety gear, and skilled labor. The contractor must ensure alignment, firmness, and finish quality of the repaired chairs to match the existing layout and design.

Replacement of Heavy-Duty Door Closers for Auditorium Hall M&L for the removal of old/damaged door closers from auditorium hall doors and the supply and installation of new heavy-duty door closers of approved make and model, suitable for large and frequently used doors. The new door closers shall be hydraulic, overhead type, heavy-duty grade, with adjustable closing and latching speed, and capable of handling doors of minimum weight 80–120 kg and width up to 1000–1500 mm complete all as specified and directed. The quoted price is inclusive of : (a) Dismantling existing door closers with care to avoid damage to the door leaf and frame. (b) Minor surface repairs or alignment corrections, if required. (c) Supply of new door closers with all fixtures, mounting plates, brackets, screws, and accessories. (d) Installation and proper alignment ensuring smooth operation, closing speed, and noise-free function. (e) Testing of each unit after installation to ensure proper functionality. (f) All tools, labor, and safety provisions required for execution.

Grinding and Polishing of Marble/kota stone Flooring M&L for machine grinding and polishing of existing marble/ kota stone flooring to restore shine, smoothness, and uniformity, including filling of cracks/voids and cleaning of the surface. The process shall be carried out in multiple stages using suitable abrasive grits and polishing compounds, as per standard practices complete all as specified and directed.

M&L for engraving the Bldg No with computarised letter of 2mm to 4mm depth like P-570, P-1537 etc including engraved border on Black granite stone of Dia 30-40 Cm and 15mm thick and fixing the same on wall of the bldg with chemical compound incl preparation of surface and necessary scaffolding and complete all as specified and directed.

M&L for preparation of old painted surfaces of iron works of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc using mechanical sander with internal dust extraction system and applying one coat of cement base paint, white or tinted using roller complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of any layer of wall/ ceiling using mechanical sander with internal dust extraction system and applying two coats of OBD of approved color using roller of make: berger/Shalimar/Asian Paints over a coat of primer over two coat of 1mm thick acrylic putty putty of same make and complete all as specified and directed. Note:- the work to be carried out at height upto 15m. the quoted price are inclusive of all necessary scaffolding, safety precautions and tools etc.

M & L for complete removal of existing treatment of old surface of any layer of wall/ ceiling using mechanical sander with internal dust extraction system and applying two coats of plastic emulsion paint of approved color using roller over a coat of primer over two coat of 1mm thick acrylic wall putty of same make and complete all as specified and directed Note:- the work to be carried out at height upto 15m. the quoted price are inclusive of all necessary scaffolding, safety precautions and tools etc.

M&L for preparing old plastered or unplastered surface of walls incl scaffolding with and including complete removal of existing treatment of any layer of wall using mechanical sander with internal dust extraction system and applying two coats of weather proof paint using roller of over and incl of a coat of exterior wall primer over two coat of 1mm thick acryllic wall care putty as aprproved by Manufacture. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of four years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill. This amount shall be returned only after completion of guarantee complete all as specified and directed. Make :excel total of nerolac / apex utima of Asian paints / Xtrapremium of Shalimar, Note:- the work to be carried out at height upto 18m. the quoted price are inclusive of all necessary scaffolding, safety precautions,machinaries and tools etc.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and removing debries out of MD land complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B1 as in flooring including neat finish over PCC complete all as specified and directed.

Dismantling of existing uneven/damaged interlocking paver tiles, including stacking of serviceable tiles for reuse and disposal of unserviceable material as directed. The existing base surface shall be cleared, leveled, and re-prepared by providing and compacting coarse sand bedding of average 25–50 mm thickness (or as required) to achieve uniform surface level and slope and relaying the interlocking tiles in existing pattern and complete all as specified and directed.

Supply only interlocking tiles required additionally as per existing colour and pattern during relaying and complete all as specified and directed.

M & L for cleaning drain of any size (Wide) and any depth including removing of all sludge, mud, foreign material, sand, ashes, fibre, silt, grease, night soil etc and removing the taken out sludge /material out side of MD land by any means/source complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement) in cement plaster 1:4 complete including taking down of existing plaster complete all as specified and directed.

M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall incl taking down of existing plaster complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces in patches, finished fair and even including taking down old plaster of any description incl racking out joints , hacking for key , scrubbing down with water etc complete all as specified and directed.

Description all as above item No 23.00 but 10mm thick in CM 1:3 as in ceiling,Chajjah,facia incl taking down existing plaster complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls including scaffolding and applying two coats of weather proof paint using roller of over and incl of a coat of exterior wall primer over two coat of 1mm thick acryllic wall care putty as aprproved by Manufacture. NOTE: The work under this item shall be carried out by contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of four years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of guarantee complete all as specified and directed. Make :excel total of nerolac / apex utima of Asian paints / Xtrapremium of Shalimar , Note:- The work to be carried out at height upto 18m. the quoted price are inclusive of all necessary scaffolding, safety precautions,machinaries and tools etc.

M & L for new plastered or unplastered surfaces of of wall/ ceiling and applying two coats of OBD of approved color using roller of make: berger/Shalimar/Asian Paints over a coat of primer over two coat of 1mm thick acrylic putty putty of same make complete all as specified and directed. Note:- the work to be carried out at height upto 15m. the quoted price are inclusive of all necessary scaffolding, safety precautions and tools etc.

Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land complete all as specified and directed.

M&L Brick work with sub Class B old size Bricks , straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub Class B old size Bricks , straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed.

M & L for Brick work with sub-class B old size bricks, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete all as specified and directed.

M&L brickwork with with sub class 'B' old size brick laid on edges in floor in drain bedded and jointed in cement and sand mortar (1:6) complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra lime or cement) in cement plaster 1:4 complete all as specified and directed.

M & L for Plain Cement concrete Type C2 1:3:6 (12.5 mm graded stone aggregate) as in surface channels,coping in drains and complete all as specified and directed.

Repairing of Existing Wooden Flooring M&L for the repair of damaged, loose, or uneven wooden flooring, including the removal and re-fixing or replacement of wooden planks/tiles as required. it includes: Careful removal of damaged wooden flooring elements (planks/strips/tiles) without damaging adjacent areas. Re-fixing loose components using adhesive or mechanical fasteners as per site condition. Replacement of broken or severely damaged wooden elements with matching size, species, and finish, as approved by the Engineer-in-Charge. Minor leveling of the sub-floor surface, if necessary. Filling of joints, cracks, or gaps using approved wood filler or sealant. Sanding of repaired areas to match existing floor level. Polishing, buffing, or recoating the repaired area to match the original finish (e.g., melamine, PU, lacquer, etc.). All necessary tools, materials (adhesives, screws, polish, filler), labor, and equipment shall be deemed to be included. Work shall be completed ensuring a smooth, level, and visually uniform surface in line with the existing flooring complete all as specified and directed.

M&L Cement concrete type D 2, 1:4:8 (using 40 mm graded graded stone aggregate) in bed of drain ,sub base of flooring/ hard standing complete all as specified and directed.

Supply and fixed in repairs 80 mm thick machine pressed precast interlocking coloured (min 2 shades in equal quantity )paver block of any size and shape confirming to IS 15658-2006 of Grade M-35 placed over sand cushioning made up with 12.5mm graded mechanicaly crushed stone aggregate, factory made of any tint, over and including filling the joints with coarse sand and including 25mm thick sand cushioning complete all as specified and directed.

Supply and fixed in repairs 60 mm thick machine pressed precast interlocking coloured (min 2 shades in equal quantity )paver block of any size and shape confirming to IS 15658-2006 of Grade M-35 placed over sand cushioning made up with 12.5mm graded mechanicaly crushed stone aggregate, factory made of any tint, over and including filling the joints with coarse sand and including 25mm thick sand cushioning complete all as specified and directed.

M&L Chequered cement concrete tiles ,glossy finish , coloured, rubber moulded 30 cm X30cm X 25 mm thick over 15 mm thick bedding of CM 1:6 in floors ,set,jointed and pointed in neat cement slurry with gray cement and pigment complete all as specified and directed.

M&L Pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate kerb Stone, setting in CM 1:4 and complete all as specified and directed.

S&F sheet glass 5.5 mm thick ordinary quality in squares exc 0.5 sq m including 25 micron black film complete all as specified and directed.

M&L in repair Powder coated aluminium door shutters (thickness or powder coating n less than 50 micron) without sash bars ,aluminium sections 0.55 Kg /m incl uding necessary joining cleats ,glazing clips ,rubber packing ,aluminium snap beading ,screws aluminium fittings such as peg stays 150 mm long (1 No) , hinges type 100 mm long (3 No )., suitable handle (2 no ), lock & key arrangement (1 no),door stopper (1 no) hydarulic door closer (1 No ) complete all as specified and directed.

M&L in repair Powder Coating (minimum thickness of powder coating 50 micron) Aluminium Door,Windows ,ventilators, with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F in repair 17-19 mm thick HDMR board, plain on one side and balancing white on other side ,interior grade, incl 1-1.50 mm thick approved sunmica on all external surfaces , fixed with screws to timber frame work or in cupboard shutters incl teak wood leaping on all around and necessary fittings like piano hinges , Knob, magnetic shutter catcher, lock & key arrangement etc complete Job all as specified and directed .

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 450 mm thick as in vertical surface in light and dark shade combination set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) tiles oof size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) of size 600mm x 600 mm in floors etc set & jointed in neat cement slurry and flush pointed with white or coloured Epoxy to match, including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Description all as per item No 47.00 above but in skirting over and including 10mm thick cement plaster 1:4 complete all as specified and directed.

M&L 20 mm thick Black Granite work (table rubbed and polished) in door frames ,steps,staircase treads and risers, jambs,pillars,window-cills, cooking plateform, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including hacking the surface if required and demolition of old stone as required complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L for 12 mm thick frosted toughned glass doors of required size including creating a design and pattern on full portion of toughened glass as per user requirement incl locking arrangement, premium large size handles:2 nos on each door , and all necessary fittings and masonary works for fixing for fixing the door in granite frame / functioning of the door including taking down of existing door of any type the surface even and finishing the same complete all as specified and directed.

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC Column, Chajja, beams,Ceilings, lintels etc, removing all loose rust/scale form exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement IRC fabric 50mm X 50mm X 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land complete all as specified and directed. Note : IRC 50x50x12 gauge shall be measured and paid separately.

Supply IRC 50mm X 50mm X 12 gauge weld mesh cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm or fixing with galvanised steel staples fixed to steel members with nut and bolt or fixed to RCC work or ceiling surfaces complete all as specified and directed.

Replacement of Panic Bar System for Auditorium Hall Door (Complete Set) M&L for the the removal of the existing panic bar system from the auditorium hall door and supply, installation, and commissioning of a new heavy-duty panic bar (crash bar) system, suitable for emergency exit doors as per fire and safety norms. it Includes: Dismantling the existing panic bar mechanism including locks, handles, and rods without damaging the door leaf or frame. Supply and installation of a new panic exit device, push-type horizontal bar (minimum 1-point or 2-point locking), suitable for double or single leaf metal/wooden doors. The new panic bar system shall be CE certified or UL-listed, corrosion-resistant, and capable of frequent use in high-traffic public areas. System shall include: Internal panic bar with push mechanism External access handle/lockset Vertical rods and latches (for 2-point locking) All fixing accessories, fasteners, and cover plates Alignment, testing, and adjustment for smooth operation and secure latching. Final cleaning and finishing of the door after installation. All tools, safety equipment, labor, and materials shall be included to ensure a complete and safe installation.

Replacement of Fancy-Type large size premium quality Door Handles for Auditorium Hall Doors M&L for the the removal of existing door handles and the supply and installation of new decorative/fancy-type handles suitable for main doors of auditorium halls. The new handles shall be of premium quality, made of stainless steel/brass/aluminum alloy (as specified), with a modern aesthetic design and durable finish (e.g., matte, satin, chrome, PVD-coated), approved by the Engineer-in-Charge. It includes: Carefully dismantling old door handles without damaging the door surface. Surface preparation including cleaning and minor repairs to mounting holes if needed. Supply and fixing of new decorative pull/push handles of minimum 300 mm to 600 mm length (or as per site requirement), with matching screws and mounting brackets. Ensuring firm grip, alignment, and finish after installation. Final cleaning and polishing of installed hardware and surrounding area. All necessary tools, hardware, labor, and safety provisions are included in the scope. The contractor shall ensure consistency in design and quality across all door handles used in the hall.

M&L for inspection, easing, and necessary adjustments to make existing aluminium /toughened glass doors fully functional, smooth-operating, and properly aligned. This includes correction of sagging, improper alignment, rubbing, or obstruction in opening/closing of the door complete all as specified and directed.

M&L Pre cast RCC 1:2:4 using 20 mm graded crushed stone aggregate as in cover slab set in CM and placing 1:4 complete all as specified and directed.

M&L mild steel TMT bars in Reinforcement 6 to 8 mm dia and over cut to length ,benyt t oshape required including cranking ,bending spirally for hooping for column ,hooking ends and binding with and ibcluding mild steel wire (annealed )mot less than 0.9 mm dia complete all as specified and directed.

Supply and Installation of Window Blinds M&L for the supply and installation of window blinds (vertical/roller/ venetian, as reqd and approved ) suitable for office/room/auditorium use. The blinds shall be of premium quality, made from dust-resistant, UV-protected, fade-resistant fabric or PVC, and of approved shade, color, and design inclusive with all accessories: brackets, operating chain/cord, bottom weights, end caps, and fixing hardware. The blinds must be easy to operate, retractable, and capable of providing light control and privacy complete all as specified and directed.

S&F Hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement requrired at site on walls including dismantling of old unserviceable wall panelling of any type including cover fillet and frame work complete all as specified and directed.

M&L Exposed metal frame ceilings with 8 mm thick calcium silicate board of silicious and calcerious material reinforced with cellulose fibre for fixing in 600 x 600 mm grid including powder coated aluminium snap grid framework of size 605mm x 605 mm including dismantling of old unserviceable false ceiling with framework of any type complete all as specified and directed.

Cleaning and Disinfection of RCC Water Tank in Auditorium M&L for complete cleaning, scrubbing, and disinfection of the RCC water storage tank (underground or overhead) located in the auditorium premises, to ensure hygiene and water safety. It Includes: Draining out of existing water from the tank. Removal of sludge, dirt, silt, algae, and foreign matter from walls and floor. Scrubbing of internal surfaces using approved tools and non-abrasive materials. High-pressure water jet washing of all internal surfaces. Application of anti-bacterial and anti-fungal disinfectant solution (approved grade) to all surfaces. Final rinsing and drying. Safe disposal of sludge and waste material as per local norms. Complete cleaning of site after work and restoration of inlet/outlet fittings. All manpower, equipment, cleaning agents, safety gear, and water removal pumps complete all as specified and directed.

Replacement of 6mm Thick Coloured Toughened Fixed Glass in Aluminium Frames M&L for the removal of existing damaged / broken fixed glass (if any) and supply and installation of 6mm thick coloured toughened fixed glass panels in existing or new aluminium framing system. The glass shall provide one-way visibility—clear view from one side and reflective/coloured appearance from the other, ensuring privacy while maintaining aesthetics.it includes: Dismantling of old fixed glass panels, if any, including safe removal and disposal. Supply and installation of 6mm thick factory-toughened coloured/reflective glass panels, cut to required size with polished edges. Fixing into powder-coated aluminium framing using suitable rubber gaskets, spacers, clips, , beadings or pressure plates. All perimeter joints and gaps to be sealed with approved neutral-grade weatherproof silicone sealant, ensuring air- and water-tight installation. Work to be executed at heights upto 15 m , provision of scaffolding, safety gear, and all tools and materials. Final alignment check, cleaning of glass surface,. All labour, materials (glass, sealants, fittings), tools, equipment, and safety arrangements shall be included complete all as specified and directed.

M&L for the carefully removal and replacement of damaged or worn-out wooden slats of size 75x15mm, ensuring exact matching with existing slats in terms of material, finish, colour, and pattern, while taking special care not to damage the existing supporting framework or embedded insulation (glasswool) complete all as specified and directed.

M&L for the carefully removal and replacement of existing calcium silicate perforated ceiling tiles, ensuring exact matching with existing tiles of 15mm thick at edges and 10mm at centre (densified profile)—without causing any damage to the existing suspension framework and insulation (glass wool). at height upto 15 m complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from existing conduit (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulator, sockets and DBs,MCBs,Sub main wiring etc) and making good disturbed surfaces of walls, floor etc of exist point complete all as specified and directed.

Taking down carefully copper/aluminium Submain wiring from battan /conduit from DBs,MCBs, etc) and making good to disturbed surfaces of walls, floor etc. complete all as specified and directed.

Point wiring with 1.5 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 1.5 Sq mm cable (including connecting to earth dolly) drawn through in existing concealed rigid PVC conduit and conduit accessories existing concealed type in walls/ceilings and also including chnage of new sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following all as per Engineer in charge :-

One light /bell / fan/Ext Fan point controlled by one nos, one way switch complete all as specified and directed.

One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 68.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

M&L for Point wiring with 1.5 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 1.5 Sq mm cable (including connecting to earth dolly) drawn through existing rigid PVC casing caping accessories in walls/ceilings and also incl change of new sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following all as per Engineer in charge :-

One light /bell / fan/Ext Fan point controlled by one nos, one way switch complete all as specified and directed.

One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 71.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 71.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 1.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board.

Supply & fixing modular switch piano 5 Amps, single pole, AC, 230 Volts, flush type, ISI Mark, complete all as specified and directed

Supply & fixing modular switch piano 15 Amps, single pole, AC, 230 Volts, flush type, ISI Mark, complete all as specified and directed

Supply and Fixing of Bell with Bell Push, 230 v, flush type, single pole complete 5 Amps, complete all as specified and directed

Supply & fixing modular Socket 5A-2/3 pin, single pole, AC, 230 Volts, flush type, ISI Mark, complete all as specified and directed

Supply & fixing modular Socket 15-2/3 pin, single pole, AC, 230 Volts, flush type, ISI Mark, complete all as specified and directed

S&F modular ceiling rose three terminals, ISI Marked.includinguding taking down old unserviceable ceiling rose complete all as specified and directed. Make : Anchor/Kay or equivalent.

S&F in repair factory made, sheet steel distribution boards, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar, and of the under mentioned type :-

TP & N 4 Ways (double door)

SP & N 8 Ways Double door

Supply in repair MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :- Note : Make of the MCB should be the same as that of DB

TPN 63 Amp .

SPN 32 Amps .

SP 6 to 32Amps

Sub main wiring with under mentioned runs/size of single core PVC insulated but unsheathed FRLS cable size with multi stranded copper conductors, 1100 volts grade, IS-694 marked, with the specified runs/size of earth continuity conductor of similar type cable, all drawn-through and including suitable size rigid PVC conduit and fittings / accessories, all fixed to concealed in walls/ceiling complete all as specified. (The under mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length) complete all as specified and directed.

Two runs of 6 Sq mm size main cable and one run of 6 Sq mm size earth continuity conductor

Sub main wiring with under mentioned runs/size of single core PVC insulated but unsheathed FRLS cable size with multi stranded copper conductors, 1100 volts grade, IS-694 marked, with the specified runs/size of earth continuity conductor of similar type cable, all drawn-through PVC Casing caping complete all as specified. (The under mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant casing Caping with accessories shall be measured as one run length) complete all as specified and directed.

Two runs of 4 Sq mm size main cable and one run of 4 Sq mm size earth continuity conductor

Two runs of 6 Sq mm size main cable and one run of 6 Sq mm size earth continuity conductor

S & F in repair for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F in replacement of Wall mounted Decorative luminaire suitable for 1 x8/9 W LED B22 cap including 1 x 8/9W LED bulb complete all as specified and directed.

S&F in repair Lamp holder insulated body with back plate suitable for batten fitting complete all as specified and directed.

M&L in repair ceiling fan regulator electronic step type suitable for 1200mm sweep fan complete all as specified and directed.

M&L for metal plug and socket with MCB and steel enclosure,including 20 Amp SP MCB complete all as specified and directed.

Supply & fixing in replacement LED security light luminaries of cap 30 watt, SPD -10KV internal with lense, 240 volt, ,pressure dia cast aluminium housing frame, heat resistant toughtened clear glass with frame complete with accessories , IP 66 protection, pre wired up to a terminal block and mounting attachment,including pvc connector for connection complete all as specified and directed. Make orients and its equivalent.

Supply and Fixing in replacement LED light fittings 36 watt Recess Mounting type (WARM WHITE COLOUR) with mounting arrangement (Recess suitable for, 2x2 Grid, Hanging) Sheet aluminium housing with high quality LGP and PMMA diffuser. Separate HPF driver suitable for Armstrong and grid ceilling LED 240 volt along with fixing arrangements complete all as specified and directed.

Supply only of capacitor 2.5 to 3.15 mfd as per existing capacity of 240V A.C complete all as specified and directed. Make TIPCON

Supply only fan regulator electronic dimmers,450w,250v flush type suitable for 48”/56” sweep ceiling fans complete all as specified and directed.

Supply only in repairs PVC casing and caping, 20mm width complete all as specified and directed.

Supply only in repairs PVC medium conduit, 20mm width complete all as specified and directed.

Supply and fixing of post top lantern of LED 25W with symmetrical light distribution , spun alumnium landascape luminaire with high power LEDs as light source with suitable GI tubing including all accessories of Make- Orient , Bajaj CG Syska or equivalent as approved by GE complete all as specified and directed.

M&L for Earthing complete with galvanised mild steel earth electrode plate 600 X 600 X 6 mm thick buried directly and vertically in ground connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion ncluding provision of earth wire protected by galvanised iron 15 mm bore medium grade pipe with all fittings from the earth electrode fixed along pole or wall with and including 25 x 6mm flat iron clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore GI medium grade from top of the earth pit to top of earth plate electrode including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel , CI frame etc complete all as specified and directed. NOTES : (i) The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.00 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC (1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover (ii) Item includes the cost of 7.5 metre GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order (iii) Items includes cost of 7.5 metre earth lead wire. Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides.

Supplying and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium stranded/Solid conductor, served with inner sheathing of PVC sheathed wire, one twin core cable flat or circular of 6 sqmm complete all as specified and directed.

Supplying and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium stranded/Solid conductor, served with inner sheathing of PVC sheathed wire, one twin core cable flat or circular of 10 sqmm complete all as specified and directed.

Supply & Fixing metal base for electric board with suitable screw in replacement of old unserviceable board, after change the wooden board & Hylum sheet surface will be as per existing surface, size of board will be required as per site complete all as specified and directed.

Supply only round back plate of holder plastic body complete all as specified and directed.

Supply only screw of electric board with washers size of screw 4/6 inch. suitale for hanging board complete all as specified and directed.

S&F in repair 40 Watt LED 5700 K light fitting environmental friendly, new generation, energy saving, recess mounted downlighter with high power COB LED as light source & clear glass and separate replaceable electronic driver suitable for cealing cutout 198 mm, hight 120 mm pre wired complete with all necessary fitting complete all as specified and directed. Make Havells or its equvalent.

S&F in repair Dimmable driver for 40 Watt downlight complete all as specified and directed.

Shiva Constructin Co. (BID ID -3354804)

M/s Rao Constructions, 1173 Urban Estate-II, Hisar (BID ID -3353327)

m/s krishna engineers1 (BID ID -3354806)