SPECIAL REPAIRS TO BLDG NO 02 AND 04 CADETS LIVING ACCN AT NCC OTA KAMPTEE.

Amount

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and directed.

Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping brass screw complete all as per manufacturer instructions complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping brass screw complete all as per manufacturer instructions complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 15mm x 0.30mm, cross tee shall be 32mm x 15mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed.

M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed. (Note: GI frame work will be measured and paid for separately)

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

S&F wire netting of galvanised steel wire 0.71mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM (1:3) complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for prepartion of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for complete removal of existing treatment including old plastered surfaces on wall including brooming down or steel wire brushing, scraping down moulds, washing down and applying two coats of acrylic emulsion weather proof paint apex of Asian 1st quality over a coat of acrylic primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparaton of surfaces complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality not exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

S&F in repairs fancy type curtain Rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

M&L for two coats of brush bond liquid compound of make Sika/ fosroc or its equivalent water proofing coating over plastered surfaces of any portion (Sika/ Fosroc chemical Ltd) as per manufacturer instructions complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 33 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 33 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 33 above but one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.

All as per item No 33 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note :- (i) Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. (ii) 1x4 Sqmm + 2x4 Sqmm wire + 1 Run PVC conduit pipe shall be measured in one unit RM.

S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed. Make :- Anchor / Roma / Legrand / Crabtree

S&F ceiling rose surface type 3 terminal 5 amps complete all as specified and directed.

S&F 0-4 step 2 module modular type electronic regulators for ceiling fan 1200/1400mm sweep, 240 volts, 120 watt single pole complete all as specified and directed.

S&F 18-22 Watt LED tube light fittings complete with aluminum body including tube rod, dirver with not less than 2000 Lumen O/P and l/p rated voltage 240 V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make & Model : Philips Astra Line CG LDC-20-CDL/ PHilips / Wipro / Surya

S&F lamp holder insulated body with back plate for angle / batten fitting complete all as specified and directed.

S&F LED luminaires 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated cvoltage 240 V, 50Hz, including mounting GI (made out of 25mm dia grade pipe 0.8 m bent two shape including FI clamps nout bolts etc complete all as specified and directed. Make : CG LSTS-25-CDL/Philips/Wipro

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrand / Hegger/L&T

S&F MCB single pole & neutral 240 volt 'C' series 6 to 40 amps 10 KA, complete all as specified and directed. Make :- Legrand / Hegger/L&T

S&F sheet metal enclosure vertical triple pole & neutral (VTPN) with MCCB 63 amps for 415 volts 4 way with 200 amp rated bus bar flush/ surface mounting double door complete all as specified and directed. Make:- Legrand / Havells /L&T

S&F MCB single pole 240 volt 'C' series 6 to 40 amps 10 KA, complete all as specified and directed. Make:- Legrand / Hegger/ L&T

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete (1:2:4) type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 97,113.00]

M/s Rahul Traders

M/s T.S.JOHAR

M/s M.G. Hargunani

M/s Jagdish Staioners and General Stores

M/S Darshan Singh Plaha

chronicle enterprises

DEESHA CONSTRUCTIONS

M/s Rana Construction

S D WAGHAMSHI

Bidder Name

S D WAGHAMSHI

chronicle enterprises

M/S Darshan Singh Plaha

DEESHA CONSTRUCTIONS

M/s B S Jain

M/s Rahul Traders

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

M/s Rana Construction

M/s T.S.JOHAR