Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC 4 9 2 ETTAYAPURAM ROAD NEAR A P C MAHALAKSHMI COLLEGE TUTICORIN 2 | L1 | Accepted-AOC L1 | |
| 2 | L2₹8.8 L+₹38,820.24 (4.61%)Rejected-AOC TAMIL NADU | PUDUKKOTTAI | TAMIL NADU | 613301 | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | MENAKA CONSTRUCTION ENGINEERS | VEL ENGINEERING |
|---|---|---|---|---|---|
| 1.00 | Charges for dismantling the ‘V’ Belts, Fly Wheel [Approximate weight 300Kg] of Blower Shaft and motor pulley with bush by using the chain blocks and lifting arrangement at centrifugal fan ‘A’ at Fan House Unit III. (All consumables, T&P hire charges under contractor's scope) | 1 | Opn | 12,650 ₹14,927 | 12,100 ₹14,278 Lowest |
| 2.00 | Charges for providing necessary supports at both sides of the blower shaft, dismantling the plummer block assembly, bearing assembly and air intake vane assembly etc. after cutting and removing of the supporting frames at both sides of the blower shaft, lifting the materials by using chain blocks if necessary scaffolding arrangements should be made and the materials should be kept at out side of the blower room as per the direction of the Engineer-in-charge. (All consumables, T&P hire charges under Contractor's Scope) | 1 | Opn | 59,800 ₹70,564 | 57,200 ₹67,496 Lowest |
| 3.00 | Charges for dismantling the front, top, side casing covers by cutting & removing of the bolt & nut, for lifting of the blower impeller assembly at Fan House 'A' at Unit III as per the direction of Engineer-in-charge. (All consumables, T&P hire charges under contractor's scope) | 1 | Opn | 44,970 ₹53,064.6 | 43,010 ₹50,751.8 Lowest |
| 4.00 | Charges for cutting & removing the existing erroded Air duct (size 2.0 X 1.5 x 1.5) mtr. and if necessary scaffolding arrangement should be made, lifting and moving the outside of blower room as per direction of the engineer-in-charge.(All consumables, T&P hire charges under contractor's scope) | 10.5 | Mtr2 | 4,095 ₹4,832.1 | 3,990 ₹4,708.2 Lowest |
| 5.00 | Charges for transportation of the Taper lock bushes of Fly wheel Qty. 1No. make: Fenner bush size 5050 from TTPS to workshop at town, enlarging the bore from pilot bore and also providing the keyway in the Taper lock bushes as per the sample, transporting back to TTPS for fixing in the shaft of the centrifugal fan & motor at Fan House Unit III Blower ‘A’. (All consumables, T&P hire charges under contractor's scope) [Fly wheel supplied by board] | 1 | Opn | 11,620 ₹13,711.6 | 11,110 ₹13,109.8 Lowest |
| 6.00 | make Pix size 3535 from workshop to TTPS, After enlarging the bore from pilot bore and also providing the keyway in the Taper lock bushes as per the sample, for fixing in the shaft of the centrifugal fan & motor at Fan House Unit III Blower ‘A’. (All consumables, T&P hire charges and motor pulley under contractor's scope) | 1 | Opn | 6,440 ₹7,599.2 | 6,160 ₹7,268.8 Lowest |
| 6.10 | Material cost contractor scope: Tapper lock pulley with bush and HT Bolts size PCD 265,TLB 3535 -4C | 1 | No | 9,320 ₹10,997.6 | 8,910 ₹10,513.8 Lowest |
| 7.00 | Charges for re-assembling of air intake vane assemblies supporting frames, plummer block assemblies at both sides by using lifting arrangements,chain block etc.(if necessary cutting & welding of frames)fixing properly, tightening of the bolt & nuts after the proper aligning of supporting frames, plummer block assembly as per the direction of Engineer-in-charge[T&Ps and consumables under contractor’s scope] | 1 | Opn | 79,350 ₹93,633 | 75,900 ₹89,562 Lowest |
| 7.10 | Material cost contractor scope: Fixed Air Inlet Vane assy with Rib Size (Outer Periphery OD 1400mm, ID 1100mm, Inner Periphery OD 250mm, Material 3.15mm M.S Plate and No Of leaf : 12Nos (As per diagram enclosed) (1 set : DE & NDE) | 1 | set | 1,59,280 ₹1,87,950.4 | 1,52,350 ₹1,79,773 Lowest |
| 8.00 | Charges for fabrication and erection of Discharge Air Duct Size (2.0 + 1.5 ) legnth 1.5 by 1mm G.I Sheet and frame by (40 x 40)mm angle and fixing the existing blower ‘A’ through bellows in Unit III Fan House. The rates include T & P hire charges and necessary consumables etc. [1mm thick GI Sheet will be supplied under Contractors Scope] | 1 | Opn | 12,650 ₹14,927 | 12,100 ₹14,278 Lowest |
Tender Value
Refer Docs
EMD Value
₹8,400
Closing Date
21 Oct 2025, 2:00 pmClosed
CE/TTPS
O/o CE/TTPS
TTPS Operation Circle MPM II AC Plant Reconditioning of blower assembly by renewing of air intake vane assemblies and newly provide air damper etc and commissioning of the blower A at Fan House Unit III
2025_EB_611797_1
CE/SE/O/TTPS/Spec.No.209/25-26
Open Tender
Miscellaneous Works
Item Rate
30 days
TTPS
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹8,400
Yes
10 Nov 2025
6 Oct 2025
22 Oct 2025
6 Oct 2025
21 Oct 2025
6 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
BOQ_731037.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .