ANNUAL REPAIR AND MAINT OF ARC BUILDING AT SULIDUNGAR, JAISALMER UNDER GE (AF) JAISALMER

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with aluminium snap beading.

M&L for Veneered decorative plywood, 6mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed to aluminium frame work, complete all as specified and as directed by Engineer-In-Charge.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II)

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L for preparing old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M & L for prepariation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.

M & L for 10mm thick rendering in CM 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.

M & L for rendering 5mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed.

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE.

M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick backing coat in CM 1:4 on brick wall complete all as specified and as directed .

M&L glazed ceramic non skid coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. (bed room and other room floor)

M & L Virified Ceramic tiles light shade 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. (bed room and other room floor)

Ditto as item above as Item No 24 including 10mm thick backing coat of cement mortar (1:4) complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repair 15 mm bore CP Stop valves/ Angle valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repairs 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.

S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed. .

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

All as per item No 31 above but 20mm bore

S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

M &L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall/PCC Block Masonry.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin complete all as specified and directed.

S&F in repairs 32 mm dia PVC waste pipe for wash basin /sinks min 1.00m long

S & F in repair tubular towel rail stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F 5.0 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane incl dismanling damage glass complete all as specified and directed.

S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair of Cast iron Nahani trap (Diameter of outlet 75mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

S&F in repair of Cast iron Nahani trap (Diameter of outlet 100mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

Hacking out old broken glasses any thickness size, quality or description from metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing figured glass, pin head type, 4.8mm thick, hacking in any bldg and at any height complete all as specified and as directed.

S&F in repairs Mortice lock brass, vertical type, size 100mm 4 lever for alluminium door complete all as spd and dirt.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M & L for machine pressed precast concrete interlocking paver block rubber moulded any shape and size with grey cement and pigment cnfirming to IS-15658-2006 of 80 mm thickness, M-35 grade over and including 25mm thick sand/stone dust complete all as spfd & directed by Engr-in-Charge. (Sand cusion paid separetely)

M&L Cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete.

M&L for chequered cement concrete tiles 300mm X 300mm x 25mm thick, set, jointed and pointed in near cement slurry in floor with grey cement and pigment including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Cleaning of Septic tanks with manholes including bailing out the foul water and taking/removing out sludge from septic tanks and manholes and disposal of the same to the dumping yard or STP of municipal corporation of city as directed by Engineer-In-Charge. (Nothing extra shall be paid for work in foul conditions and transportation of sludge to dumping yard or STP of minicipal corporation of city.). Note :- The contractor shall arrange for all safety arrangements for labours to work in foul condition.

Cleaning solid /liquid mud deposited in under ground sewage lines, upto and including 150mm dia bore, of any type, between consecutive manholes, by hydraulic jet pressure machine, through connecting manholes, complete men, machine and water as required , including removal and refixing of manhole covers, complete all as specified and directed. Note : The contractor will arrange safaiwala immediately on reciept of complaint and ensure that complaint is resolved within 24 hours and no lapses will be allowed.

M&L for providing precast cement concrete, Type B1 1:2:4 (20mm graded aggregate), set in cement mortar 1:4, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

S&F of TMT bars of 10mm dia and over, dia cut to length bent to shape required including cranking bending spirally, hooking ends and binding with mild steel wire not less than 0.9 mm dia(annealed) complete all as specified and directed by Engr-in-Charge. (Note - The payment shall be made only after placing of cover.

S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/in wall for closing the wall gap, fixed with self tapping screws as specified.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of drain pipes, or for manhole, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil all as specified and directed by Engr - in - charge.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified and directed by Engr - in - charge.

Removing excavated material nexc 50mtr and depositing where directed at a level n exc 1.5m above the starting point

Demolition and breaking up drain pipes of 150 mm dia (Salt glazed ware ,AC or Reinforced concrete ) set in cement mortar including bedding haunching complete all as specified and directed by Engineer-in-Charge

M&L in replacement of 150mm bore pipe reinforced concrete, class NP2, laid and jointed complete with collars complete all as specified & as directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate, 100mm thick and 450mm wide, for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete.

Material & Labour for cleaning of underground water storage tank/ Sump/Closed static Water tank of any size and any depth, cleaning of walls of the tank using a mixture of 1 part bleach to 4 parts hot water , wash the sides of the tank with the mop (or pressure washer) in order to remove the slime and dirt build up on the sides and corners of the tank. Scrub the build-up on the bottom of the tank and use wet/dry vaccum to to remove the rinse water from the tank. Note :- 1. Contractor shall make necessary safety arrangements so that the cleaners enter the tank for cleaning. 2. The rate is inclusive of the pumping out of the water available in the tank before cleaning. 3. The cleaning and pumping out of the rinse/waste water shall be done upto satisfaction lavel of the users.

Attending day to day complaints as and when required with necessary T&P by deploying skilled labour i.e Carpenter, Plumber and mason etc as Directed by Engineer-In-Charge.

Attending day to day complaints as and when required with necessary T&P by deploying Sewerman for opening of blocked rain water pipes, sewer line, gully traps, manhole chambers etc. as directed by Engineer-In-Charge.

M&L in repair concertina coil making good condition as per required etc.as directed by Engineer-In-Charge.

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg of Aluminium (Die Cast) body and fixed

S&F of Gate Valves of 25 mm Dia

Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, any thickness, including cover fiilets complete all as specified and directed.

M & L for 4 mm thick 595 x 595 mm eco board classic as in false ceiling incl powdr coated Gi grid system and adjustabe suspender and fastening arrangement complete all as specified and directed.

Attending day to day complaints as and when required with necessary T&P by deploying skilled labour/ mechanic i.e AC mechanic, i.e AC mechanic, Electrician, DG mechanic etc, complete all as specified and directed by Engineer-in-Charge.

Servicing of split Air conditioner of capacity 2Ton/1.5Ton including servicing and repair to voltage stabilizers complete all as specified and directed.

Servicing and repair of Monoblock pump set and submersible pump set of capacity upto 3HP complete all as specified and directed.

Servicing and repair of DG Set of capacity 30KVA including change of engine oil, filter, fuel filter and painting of outer body of DG Set complete all as specified and directed.

Supply and fixing of LED aviation obstruction light complete all as specified and directed.

Repair and maintenance of Desert cooler including change of wood pad, submersible water lifting pump and repair to motor complete all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan, socket or power point complete including fitting such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc removing from site and making good disturbed surface of wall, floor etc as exists complete all as specified and as directed.

Taking down submain wiring including earth wire and making good disturbed surfaces to match with the existing surface roof/wall /floor including removing from site complete all as specified and as directed.

Taking down carefully unserviceable main switches , DB including MCB’s complete of any size and capacity complete all as specified.

Point wiring with 1.5 sqmm copper conductor cables (multistranded) FRLSH PVC insulated and unsheathed in and including concealed PVC conduit (ISI marked) 25mm dia with sunk cast iron/pressed steel terminal box of adequate size with 3mm thick plastic laminated sheet cover for one light point/fan point/Bell point controlled by one, one way switch including continuous 1.5 Sqmm copper conductor (multistranded) FRLS PVC insulated and unsheathed cable connected to earth dully complete all as specified conforming to IS-694.

All as per item No 4 here in before but for one 3 pin socket outlet 5 Amps on the same board with other switches.

All as per item No 4 here in before but for one 3 pin socket outlet 5 Amps independent.

All as per item No 4 here in before but for one 5 pin socket outlet 15 Amps and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 1.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire terminal box of size 175mm x 100 x 3.15mm complete all as specified.

M & L for submain wiring with two single core 4 sqmm FRLS PVC insulated, unsheathed, cable 110 V Grade heavy duty, copper conductor, drawn in PVC conduit, medium grade, 25mm bore having 2mm wall thickness including one single core FRLS PVC insulated copper cable multistranded of size 4Sqmm as earth wire fix to wall etc complete all as specified and as directed.

S & F of modular switch one way 6 Amp, Single pole complete all as specified and directed.

S & F of socket outlet 5 Pin, 5 Amps multipurpose flush type complete all as specified and directed

S & F of ceiling rose 3 terminals complete all as specified and directed.

S & F of modular switch one way 16 Amp, Single pole complete all as specified and directed.

S & F of modular socket 2 in 1,6 and 16 Amps multipurpose flush type 2 module complete all as specified and directed.

S & F of Electronic fan regular flush mounting 300-400 watts switch size having 4 step to regulate/control speed of ceiling speed of ceiling fan complete.

S & F of modular white cover plate with frame, 3 module complete all as specified and directed.

S & F of modular metal flush box 3 module complete all as specified and directed.

S & F in replacement LED integrated batten fitting, 20W, 230V surface etc, complete with 20W LED tube rod with all accessories pre-wired including connecting up with twin core twisted flexible copper conductor cable of suitable size.

Supply and fixing for LED light fitting mirror type with high out put diffuser 2 feet, 10watt 220 VAC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing for LED security light fitting 30 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Taking down carefully ceiling fan 230 volts single phase 50 HZ form the position after dismantling fan blades of any sweeps and carrying out complete servicing with and including cleaning, greasing, replacing flexible 3 core cable of size 1.5 Sqmm with copper conductor from ceiling rose to fan, replacing rubber reel, split pins, check nuts, PVC connector complete with and including painting with 2 coats of synthetic enameled paint over a coat of red oxide anticorrosive primer after rubbing entire fan body and blades and fixing back the fan in position complete all as specified and directed.

S & F in replacement of sheet metal enclosure for MCB distribution board TPN, double door 4 way, vertical type with 200 Amp rated bus bar 415 V complete all as directed.

S & F in replacement sheet metal enclosure factory fabricated for MCB distribution board SPN 240 volt,12 way with suitable Amp rated bus bar having IP-42 protection and double metal door connected in wall including connection with thimbles as required complete all as specified and directed.

S & F in replacement sheet metal enclosure factory fabricated for MCB distribution board SPN 240-volt, 8 ways with suitable Amp rated bus bar having IP-42 protection and double metal door concealed in wall including connection with thimbles as required complete all as specified and directed.

S & F of MCB FP, 125 Amp, 415 Volt, 16 KA complete all as specified and directed.

S & F for MCB SPN 40-63 Amp, 240 Volt, ‘C’ curve completes all as specified and directed.

S & F for MCB SP 6-32 Amp, 240 Volt, ‘C’ curve 10 KA complete all as specified and directed.

Supply and fixing for post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply & fixing for exhaust fans AC single phase 230/240V of size 300mm sweep with louvers complete all as specified and directed.

MARUDHARA CONSTRUCTION COMPANY (BID ID -3464813)

S K TRADER (BID ID -3470187)