INSTALLATION OF 05 NOS 250 KVA TRANSFORMER AT VARIOUS PLACES UNDER EUDD VII NOIDA

Amount

FOLLOWING WORK INSTALLATION OF ADDITIONAL 250 KV TRANSFORMER FOR REDUCING THE OVERLOADING AND PROVIDE UNTRIPPED POWER SUPPLY TO RELATED CONSUMER AT BALMIKI MOHALLA VILLAGE HOSIYARPUR SECTOR-50, NOIDA. :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 1x400 Sq.mm. Alu XLPE Cable 1.1 KV from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Providing of MS T-channel as per site requirement.

Fabrication & fixing of above MS T-channel complete in all respects..

Providing of Dropper channel as per site requirement.

Fabrication & fixing of above Dropper channel complete in all respects..

Providing of 11 KV Pin Insulator with pins.

Fixing of above 11 KV Pin Insulator with pins.

Providing of 11 KV Disc Insulator with Fitting.

Fixing of above 11 KV Disc Insulator with Fitting.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double pole structure on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Providing of stay rod 1800x16 mm (Stay set complete).

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x400 Sq.mm. Alu XLPE Cable 1.1 KV including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 400 Sq.mm.

Fixing of above aluminium crimping lugs 400 Sq.mm.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in H.T. lines at site places.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA 11/0.4 KV copper wound Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA 11/0.4 KV copper wound Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT VARIOUS PLACES AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing & Fixing of off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Resagging of existing H.T/L.T. Line in both side spans.

Cutting and chopping of tree branches on the H.T./ L.T. as per site requirement.

Providing of 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Fixing of above 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Providing of Dead End clamps (Insulated) with bolts & nut.

Fixing of above Dead End clamps (Insulated) with bolts & nut.

Providing of Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Providing of Suspension clamps (Insulated) with bolts & nut.

Fixing of above Suspension clamps (Insulated) with bolts & nut.

Providing of Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

FOLLOWING WORK INSTALLATION OF ADDITIONAL 250 KV TRANSFORMER FOR REDUCING THE OVERLOADING AND PROVIDE UNTRIPPED POWER SUPPLY TO RELATED CONSUMER AT NAWADA PULIA SECTOR-62, NOIDA IN AREA OF EUDSD-XIII, NOIDA. :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 1x400 Sq.mm. Alu XLPE Cable 1.1 KV from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Providing of MS T-channel as per site requirement.

Fabrication & fixing of above MS T-channel complete in all respects..

Providing of Dropper channel as per site requirement.

Fabrication & fixing of above Dropper channel complete in all respects..

Providing of 11 KV Pin Insulator with pins.

Fixing of above 11 KV Pin Insulator with pins.

Providing of 11 KV Disc Insulator with Fitting.

Fixing of above 11 KV Disc Insulator with Fitting.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double pole structure on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Providing of stay rod 1800x16 mm (Stay set complete).

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x400 Sq.mm. Alu XLPE Cable 1.1 KV including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 400 Sq.mm.

Fixing of above aluminium crimping lugs 400 Sq.mm.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in H.T. lines at site places.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA 11/0.4 KV copper wound Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA 11/0.4 KV copper wound Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT VARIOUS PLACES AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing & Fixing of off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Resagging of existing H.T/L.T. Line in both side spans.

Cutting and chopping of tree branches on the H.T./ L.T. as per site requirement.

Providing of 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Fixing of above 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Providing of Dead End clamps (Insulated) with bolts & nut.

Fixing of above Dead End clamps (Insulated) with bolts & nut.

Providing of Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Providing of Suspension clamps (Insulated) with bolts & nut.

Fixing of above Suspension clamps (Insulated) with bolts & nut.

Providing of Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

FOLLOWING WORK INSTALLATION OF ADDITIONAL 250 KV TRANSFORMER FOR REDUCING THE OVERLOADING AND PROVIDE UNTRIPPED POWER SUPPLY TO RELATED CONSUMER AT GANGAJAL NAWADA. SECTOR-62, NOIDA IN AREA OF EUDSD-XIII, NOIDA. :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 1x400 Sq.mm. Alu XLPE Cable 1.1 KV from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Providing of MS T-channel as per site requirement.

Fabrication & fixing of above MS T-channel complete in all respects..

Providing of Dropper channel as per site requirement.

Fabrication & fixing of above Dropper channel complete in all respects..

Providing of 11 KV Pin Insulator with pins.

Fixing of above 11 KV Pin Insulator with pins.

Providing of 11 KV Disc Insulator with Fitting.

Fixing of above 11 KV Disc Insulator with Fitting.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double pole structure on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Providing of stay rod 1800x16 mm (Stay set complete).

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x400 Sq.mm. Alu XLPE Cable 1.1 KV including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 400 Sq.mm.

Fixing of above aluminium crimping lugs 400 Sq.mm.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in H.T. lines at site places.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA 11/0.4 KV copper wound Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA 11/0.4 KV copper wound Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT VARIOUS PLACES AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing & Fixing of off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Resagging of existing H.T/L.T. Line in both side spans.

Cutting and chopping of tree branches on the H.T./ L.T. as per site requirement.

Providing of 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Fixing of above 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Providing of Dead End clamps (Insulated) with bolts & nut.

Fixing of above Dead End clamps (Insulated) with bolts & nut.

Providing of Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Providing of Suspension clamps (Insulated) with bolts & nut.

Fixing of above Suspension clamps (Insulated) with bolts & nut.

Providing of Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

FOLLOWING WORK INSTALLATION OF ADDITIONAL 250 KV TRANSFORMER FOR REDUCING THE OVERLOADING AND PROVIDE UNTRIPPED POWER SUPPLY TO RELATED CONSUMER AT A-99, A-BLOCK, SECTOR-33, NOIDA IN AREA OF EUDSD-XIII, NOIDA. :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 1x400 Sq.mm. Alu XLPE Cable 1.1 KV from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Providing of MS T-channel as per site requirement.

Fabrication & fixing of above MS T-channel complete in all respects..

Providing of Dropper channel as per site requirement.

Fabrication & fixing of above Dropper channel complete in all respects..

Providing of 11 KV Pin Insulator with pins.

Fixing of above 11 KV Pin Insulator with pins.

Providing of 11 KV Disc Insulator with Fitting.

Fixing of above 11 KV Disc Insulator with Fitting.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double pole structure on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Providing of stay rod 1800x16 mm (Stay set complete).

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x400 Sq.mm. Alu XLPE Cable 1.1 KV including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 400 Sq.mm.

Fixing of above aluminium crimping lugs 400 Sq.mm.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in H.T. lines at site places.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA 11/0.4 KV copper wound Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA 11/0.4 KV copper wound Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT VARIOUS PLACES AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing & Fixing of off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Resagging of existing H.T/L.T. Line in both side spans.

Cutting and chopping of tree branches on the H.T./ L.T. as per site requirement.

Providing of 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Fixing of above 6" dia G.I. Pipe for cable support each pipe 3 mtrs. in long 4 pieces.

Providing of Dead End clamps (Insulated) with bolts & nut.

Fixing of above Dead End clamps (Insulated) with bolts & nut.

Providing of Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Providing of Suspension clamps (Insulated) with bolts & nut.

Fixing of above Suspension clamps (Insulated) with bolts & nut.

Providing of Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

FOLLOWING WORK INSTALLATION OF ADDITIONAL 250 KV TRANSFORMER FOR REDUCING THE OVERLOADING AND PROVIDE UNTRIPPED POWER SUPPLY TO RELATED CONSUMER AT C-96, SECTOR-23, NOIDA IN AREA OF EUDSD-II, NOIDA. :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Providing of MS T-channel as per site requirement.

Fabrication & fixing of above MS T-channel complete in all respects..

Providing of Dropper channel as per site requirement.

Fabrication & fixing of above Dropper channel complete in all respects..

Providing of 11 KV Pin Insulator with pins.

Fixing of above 11 KV Pin Insulator with pins.

Providing of 11 KV Disc Insulator with Fitting.

Fixing of above 11 KV Disc Insulator with Fitting.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double pole structure on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Providing of stay rod 1800x16 mm (Stay set complete).

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in H.T. lines at site places.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16/35 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA 11/0.4 KV copper wound Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA 11/0.4 KV copper wound Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT VARIOUS PLACES AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing & Fixing of off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Resagging of existing H.T/L.T. Line in both side spans.

Cutting and chopping of tree branches on the H.T./ L.T. as per site requirement.

Providing of Dead End clamps (Insulated) with bolts & nut.

Fixing of above Dead End clamps (Insulated) with bolts & nut.

Providing of Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Dead End I-Hook (Insulated) for above clamps with bolts & nut.

Providing of Suspension clamps (Insulated) with bolts & nut.

Fixing of above Suspension clamps (Insulated) with bolts & nut.

Providing of Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

Fixing of above Suspension clamps I-Hook (Insulated) for above clamps with bolts & nut.

Raj Engineers

MAYASHEEL CONSTRUCTION