PROVN OF 01 x COVERED SHED FOL DUMP (APPROX 80 SQM) AT PANAGARH MIL STN UNDER GE (P) PANAGARH

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in loose/soft soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose / soft soil.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth but n exc 3.0 m; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in loose / soft soil.

M&L Hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface.

M&L for Cement concrete type D2 1:4:8 (40mm graded stone aggregate) in foundations, filling and mass concrete.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete.

M&L for RCC M-25 (Design mix) using 20mm grades stones aggregate as in foundations, including rafts, footings, foundation beams; plinth beams;bases of columns and the like completed all as specified and as directed.

M&L Formwork for rough finished surfaces of conc to sides of square/rectangular pillars,posts, struts, piers, columns and stanchions.

M&L for RCC M-25 (Design mix) using 20mm grades stones aggregate) as in Columns, pillars, piers, posts and struts completed all as specified and as directed.

M&L Formwork for rough finished surfaces of conc of to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for RCC M-25 (Design mix) using 20mm grades stones aggregate as in Beams, cantilevers, bressummers,lintels over 1.50m sapn lintels over 1.5m span completed all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

As per item No 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc Fe-290 (Gde E-165).

S&F wind tie for roof iincluding securing bolt including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make:- M/S Tata Blue scope steel ltd. (colorbond steel) / equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make:- M/S Tata Blue scope steel ltd. (colorbond steel) / equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd.

M&L for modular size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:6

M&L for Rendering 15mm thick fair faces of brickwork or concrete surfaces in CM 1:6complete all as specified.

M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 with water proofing compound complete all as specified.

Material & Labour for mixixing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e 10 % Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting complete as specified and as directed.

M&L for 100mm thick plain Cement concrete 1:3:6 type B2 (using 40mm graded stone aggregate) in floor, sub base or pavings all as specified.

M&L 50 mm thick PCC 1:2:4 (using 20mm graded aggregate) as inf floor finished even and smooth with using extra cement.

M&L for preparation of newly steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel, first quality, over a coat of red oxide. Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) /Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd.

M&L for preparation of newly plastered surfaces and applying two coat of white wash. Make:- M/s Rayalseema Chemical Industreis / Birla White / Swastik Chemical industries.

M&L for painting of wall surfaces with two coats of Cement based paint, first quality, with one coat of cement primer, including preparation of new surfaces Make:- .Jotun India Pvt Ltd./ Snowcem Plus / Berger / Asian Paints (Gutucam / Crimocem Super Cement paints.

M&L for brokern stone/boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

M&L Sand filling under floors or in foundations including watering and consolidation.

S & F Pressed steel frames size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed. Make:- B A Enterprises / Multiwyn Industrial Corporation / Doorwyn Industries / Modern Fabricator / Madhu Industries / Ajanta Ispat / Alusys.

S&F 1 mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required. Make:- Tata / Jindal / Sail.

S&F butt hinges, medium weight cold rolled mild steel and fixed as 100mm long.

S&F 150 mm size mild steel pressed handles, over type , stove enamelled black.

S&F 300mm long Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. Make for item nos. 34,35 & 36:-Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset.

Note: In case doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

ARUP KUMAR GHOSH

ROY ENTERPRISE

M/s BISWAJIT GHOSH

ANSH CONSTRUCTION