C.O new Servant Quarter at Abber foile above Auckland Tunnel at Shimla. SH C.O 1 Room set with toilet and kitchen at Abberfoile along with type VI quarter

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in all heights and depths or in foundation trenches etc. in all kinds of soil including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rock (where blasting is prohibited and their intermediate classifications soils including dewatering where ever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, according to the CPWD specification and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site including prescribed dumping charges to be arranged by the contractor himself to the satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour machineries, tools equipments and safety measures and incidentals necessary to complete the work wise mechanical means and labour (if required) all useful material such as stones,shingles aggregate and slates shall be properly stacked at site to the meximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor including carriage of materials within all leads and lifts in all respect including all incidental charges:- All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden/steel battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidental charges (i) Foundation footing and basis of columns, etc. and mass concrete.

Vertical surfaces such as walls (any thicknes) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

(iii) Suspended floors, roofs, landings, balconies and access platform

(iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers

(v) Columns, Pillars, Piers, Abutments, Posts and Struts

(vii) Edges of slabs and break in floors and walls :- (a)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand: 10graded stone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinth as required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.

Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 gradedstone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinthas required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.