Construction of Welcome Gate Ashok Dwar on Hisar Delhi National Highway near Military Cantonment, MC Hisar

Amount

EARTH FILLING LEAD UP TO 10 KM INCLUDING LOADING UNLOADING

S/E of PVC unsheathed FRLS copper conductor cable single core 1100 volt grade in existing pipe of suitable size excluding cost and erection of pipe. Size 2.5 sqmm.Make:-Havells FRLS,Finolex FRLS,RR Cables FRLS

Supply of exterior rated LED RGBW Flexible LED Strip with 14.4 Watt per meter. LED Strip should have 60Nos LEDs per meter through out the length with the silicon cover with system lumen output should be more than 700 lms /Meter. Standard Length of LED Strip is 5 Mtr and it shall be capable of producing dynamic color changing light for with 16 million colors and should be programmable using 8 bit control DMX512 protocol / Ethernet based control. The Strip should have IP 67 protection with inbuilt IP67 connectors at both ends. DMX enabler circuit should be outside the Luminaire/LED Strip only. LED Strip shall be suitable to operate at an ambient temperature range of -20°C to 50°C. Life time shall be at least L70B50 @ 35000 burning hours at 50°C. LED should of make Nichea, Osram, Cree, Lumiled, Hongya of 5050 SMD package only. The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305Vac, PF ) 0.95 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be ) 80,000 hours and MTBF of LED driver should be = 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc ) 90°C. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary mounting accessories required for proper working of fixture including weather proof connection cables, aluminum profile with diffuser,Driver, decoder, water proof connectors, junction box etc. as required. Make:-Havells/Philips/lumenpulse/Iguzzini.

S/E of Instruction Forwarder Ranger/Compass(AC) which dedicated to amplify, forward and insulate the signal that comes from the DMX controller When it is connected to the bus of DMX512. long-distance transmission, realize extending the signal transmission distance, Water proof IP65, compatible with various kinds of power range fixture. Seclusion type, total isolation withstand voltage)500v, suitable for long distance transfer or stronginterference environment.External Constant voltage 24V Power supply required to operate the device, DMX Signal is protected from Surge upto 4KV.,complete with all accessories as required with connections (Industrial) Make: Havells/Philips/lumenpulse/Iguzzini.

S/E of Supply of DMX Splitter with Input Voltage range : 190-240V AC, Power Consumption 5W max. Housing is made of CRCA with powder coated finish Mounting, 19 inch rack mountable, Operation Temperature -30°C to plus 55°C, 8 Output with 3pin XLR terminal sockets, Ingress Protection Rating IP20. This unit takes the DMX Signal from DMX Controller and split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input. Splitters should be capable to amplify the DMX signal and allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX cable or maximum 20-25 fixture per output channel. To be provided with IP enclosure if installed in external environment.,complete with all accessories as required with connections (Industrial) Make: Havells/Philips/lumenpulse/Iguzzini

S/E of Address writer,complete with all accessories as required with connections (Industrial) Make: Havells/Philips/lumenpulse/Iguzzini.(NS)

S/E of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5 V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB and Ethernet .Dmx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of kepad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) and also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta: clamp to mount on wall. Equivalent Havells DMX Controller. The Facade Lighting products and DMX controller should be of same / single make.To be provided with IP 66 enclosure if installed in external environment. MaKE:-Havells/Philips/lumenpulse/Iguzzini.

S/E of DMX Signal Amplifier to boost the Signal, IP 65 rated module to enahce the depleting DMX Signals, should have IP 66/67 rates inbuilt connectors compatible with Luminaires. It should be offered with inbuilt electronic ciruit for functioning. No external LED driver needed.complete with all accessories as required with connections (Industrial) Make: Havells/Philips/lumenpulse/Iguzzini

Supply /Installation/Testing/Commissioning of Cast iron-Grooved Mild steel Column combo ornamental pole with Cast aluminium double arm bracket and decorative hanging type Post Top light luminaire as per attached drawing. The total height of the pole with bracket and decorative light shall be 3000 mm nominal. The Pole is made out cast iron pedestal and Grooved mild steel Column with built-in control box at the bottom. A Control box accommodates a 6 amp MCB and 32 amp connector for mains connections. The decorative Post Top light luminaire are made out of cast aluminium and stainless steel diffuser holding strips..The LED Light/Buld should be 20-30 watt in warm white color (3000K)of make:-Oshram/philips/havells. The decorative Post Top light luminaire shall be suitable for retrofit led lamps B-22d type. Transparent PMMA Diffusers shall be fitted in the decorative Post Top light . The shape and sizes of the decorative Post Top light shall be as per attached drawing. The Pole and decorative Post Top light shall be machined and polished properly to give it a smooth surface. The Cast iron- Grooved Mild steel Column combo pole with double arm bracket and decorative Post Top light shall be duly pretreated by shot blasting and sanding process and shall be painted/ Powder coated in Polyurethane/Polyester Coating as per Colour shade required by engineer in charge. The coating on the pole and Luminaire shall be baked in the oven at required temperature. The coating on the pole and Luminaire shall pass a minimum of 300 salt spray hours and shall have minimum 90 microns coating.The pole should be comlete with suitable foundation and anchor nuts and bolts with accessories and with connections. Make:-Homdec Lighting /Ligtech/Leksa lighting

S/E of underground cable XLPE CABLE aluminium conductor armoured .

Designing, Fabricating, Manufactureing and Installation of Glass Reinforced Concrete G.R.C.Formliners of make 15-25 mm thickness in approved size, pattern, design, and thickness with Dry Fixing method, The formliners should be made from `53 grade` approved White portland cement in Grade 8, quartz, fine silica sand, alkali resistant glass fiber manufactured. Polymers manufactured by approved manufacturer or equivalent, super plasticizer manufactured by approved manufacturer or equivalent with UV resistant synthetic inorganic pigments made by approved manufacturer or equivalent. The material casting should be dome in synthetic rubber/FRP Fixing of (Glass Fiber Reinforced Formliner) GRC Formliners to be fixed on/ between RCC/ Block work Column or structural steel work with Dry Fixing method with appropriate steel frame work, using fasteners, and necessary hardware etc, in Building Facade. The formliners shall be securely fixed with stainless steel bolts and anchor fastener (304 grade) of required size at specified locations. The fixing shall be done by the specialized approved agency as directed by Engineer-in-Charge. (Base structure framework to be paid extra)

Providing and fixing 3`-6` high IRC SP-14 / as per drawing single crash barrier one side made of 3 mm thick GI sheet fixed with MS post further embeded in cement concrete blocks/RCC beam (excluding cost of cement conc. Blocks.RCC beam) fixed in position including cost of nuts, bolts, welding etc, complete in all respect . -frieght included /GST included

Providing and fixing at all height Metal Letters Golden - Ashok Stambh etc . including cost of connectors, tape, nuts, screws, bolts etc. complete in all respect.

Providing and fixing at all height MUNICIPAL CORPORATION name made of 3 mm thick acrylic sheet with LED light including cost of electric wires and connectors, tape, screws, gutties, nuts and bolts etc. complerte in all respect as directed by Engineering-in-Charge...

Providing and fixing factory manufactured cement concrete 1:2:4 kerb finished smooth and of size 1’-0” x 1’-0” x 0’-6” with rounded edge, fixed at ground level along with road/cement concrete payments, complete in all respect but excluding cost of cement pointing.

Bidder Name

Amount

HIMALAYAN INFRACORP PRIVATE LIMITED (GSTN-06AACCH8826Q1ZY) BID ID -1019122

Shishpal Govt. Contractor (GSTN-06AKPPP4326H1ZX) BID ID -1019790

HIMALAYAN INFRACORP PRIVATE LIMITED

HIMALAYAN INFRACORP PRIVATE LIMITED