Erection of Feeder Pillar Box at Jagadish Nagar Yellamma Devi Temple Ward No52

Erection of Feeder Pillar Box at Jagadish Nagar Yellamma Devi Temple Ward No52

30.02) 12 Way Feeder Piller Box 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 (Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)

9.04) above 8 Ways Basic Rate:1785 Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete

51.01) Pipe Grounding

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,

3.2 mm thick with bolt, nut, GI Strips and washer

complete Minimum Weight of GI Pipe: 7.3 Kg

51.02) Pipe Grounding

Good Quality well burnt Charcoal for grounding

purposes packed in non returnable gunny bag of 30 Kg

51.03) Pipe Grounding

Good Quality Salt for grounding purposes packed in 50

1.6.1 Ordinary Soil Digging of Pit for providing GI Pipe type Earthing

32.18 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1...

21.07 120 to 240 Sqmm Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sqmm

66.04 HDPE/PLB Pipe 50/42 mm Optical Fibre Cable (OFC) and its Accessories

1.6.1 In all kinds of soils. Depth upto 1.50m Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, s...

35.04 3.5 x 225/240/300 Sqmm Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable

22.15 120 to 240 Sqmm Fixing Heat shrinkable Type Terminations

Refilling Around Cable Refilling available earth around trenches pipelines,cables in layers not exceeding 20 cm in depth, ompacting each deposited layer by ramming after

watering with a lead upto 50 m...

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.

Releasing & Refixing of Over Head Service Mains (Single Phase/3 Phase Per connection /Installation (While executing reconductoring works only)

Releasing RCC/PSC Pole 9 Mtrs,8 Mtrs Dismanting of Steel/I- Beam 90% of the Pole erection charges (2.02 + 1.1.1)

Releasing of 2/4 Pin cross arm with Insulator and Braces fixing ]

7/10 SWG GI Wire

(7/3.251 mm Dia), Std Wt: 680 Kg/KM

5.10 Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

5.09 Guy Clamp - MS,

1.7.1 Ordinary Soil Digging of Pit for GUY SET