SPL REPAIR TO BLDG NO P-159 AT KLP LOCATION OF ECIB UNDER GE (FW) KOLKATA

Amount

Bore packing of all the spouts to be done with grouting admixture mixes with Cement Concrete / Mortar @225 ml per bag of Cement complete all as specified and as directed. ( Make:- Fosroc/Elantas beck/Kunal conchem)

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.(upto 04 storey High of building).

M&L for RCC for Type B1 1:1.5:3 (20 mm graded aggregate) (Nominal mix) using 20 mm graded crushed stone aggregate as in chajjas, kitchen shelves and similar work all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

M&L Mild steel TMT bars 6mm and 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.(upto 04 storey High of building).

M&L for Rendering 15mm thick in CM (1:6) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

M&L for Rendering 20mm thick in two layers (Top 10mm thick rendering coat mixed with water proofing compound shall be laid over 10mm thick plastered surface) with CM (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed .(upto 04 storey High of building) Note: WPC shall be measured and paid separately.

M&L for Rendering 5mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and as directed .(upto 04 storey High of building).

M&L for preparation of new plastered surfaces of wall , ceiling and applying two coat of acrylic distemper over a coat of alkali registrant primer with 3mm thick wall care putty. complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building).

M/L preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of alkali registrant primer and one coat of wall putty to match with the new surface on wall. complete all as specified and as directed.(upto 04 storey High of building).

S&F PVC wall paper of approved design with CMC powder and a base of 6 mm ply (over 3mm thick wall care putty) on the background fixed with adhesive and a design bit of 38 mm on the ply complete all as specified and as directed.

M&L preparation of new wall surfaces and applying two coat of plastic emulsion paint over a coat of primer and 2 mm thick wall care putty all as specified.

M&L preparation of new ceiling surfaces surfaces and applying two coat of plastic emulsion paint over a coat of primer and 2mm thick wall care putty all as specified.

M&L for Preparation of old surfaces of wall and applying two coat of plastic emulsion paint over one coat primer and 2 mm thick wall care putty all as specified

Supply only Integral water proofing compound (ISI Mark) @ 3% of cement complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B2,40mm graded aggregate finished without using extra cement complete all as specified

Supply and fixing 25mm thick pre-polished decorative cement concrete / Endura tiles of size 300mmx300mm, as in flooring over 20mm thick backing layer of cement mortar (1:6) set and jointed in neat cement slurry and pointed in white cement mixed with admixture pigment to match the shade, as directed.

Demolition of stone slabs and floor/ wall tiles of any description or thickness in floors, aprons all as specified and directed.

M & L for colour Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm backing coat in CM 1:4 etc complete all as specified and as directed

M & L for light shade Verified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 1.00 sqm but n. exceeding 2.00 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and as directed.

M&L Vitrified ceramic colored tiles light shade 10mm thick (square/rectangular ) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in cement mortar screed bed 15 mm thick in 1:6 and pointed in white cement with pigment to match the surface all as specified and as directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 20mm thick cement mortar bedding (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. (upto 04 storey High of building).

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

S&F double action floor door spring hydraulically regulated made up of minimum alloy steel foundation box main body with stainless steel cover governing pirot made of brass other part of MS heavy duty and fixed complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs any thickness incl cover fillets complete all as specified and as directed.

S&F 10 to 12mm thick gypsum board false ceiling on curved or plain type surface including any sunk or raised moulding including in step design . Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

Supply and fixing factory made uPVC white colour Sliding window Three track, area not exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Including Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white colour Sliding window Three track, area exceeding 2.00 sqm each, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Including Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply and fixing factory made uPVC white colour fixed glazed window made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.10sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F powder coated anodised aluminium frame for windows / ventilators and partition with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated anodised aluminium window / ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

S&F 5.5 mm thick toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed.

S&F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

S&F powder coated anodised aluminium window grills of size 100 x 100mm having section width 6 mm and 3 mm thickness, fixed on aluminium section weighing not less than 0.55 kg/metre including necessary jointing fittings etc all as per manufacturer's instruction complete all as specified and directed.

S&F factory made solid PVC Moulded Door Shutter, with particle board core 28mm to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick mouldedd PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as per specified and as directed.

S&F Solid pvc Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube , supplying & fixing in opening all as per specified and directed.

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed (a) (upto 04 storey High of building)

S&F 125 mm long Aluminium handles, cast type, anodised complete all as specified and as directed. (upto 04 storey High of building).

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

Demolition of brick work built in cement mortar including all quoins arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as directed.

M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius built in CM 1:6 complete all as specified and as directed

M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius in half bricks built in C:M 1:6 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed . (upto 04 storey High of building)

Dismantling cast iron or re-enforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed . (upto 04 storey High of building).

S&F sand cast pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed . (upto 04 storey High of building)

S&F CI bend, diminishing piece with door of 100mm bore with duct, foot and heel rest complete all as specified and as directed (upto 04 storey High of building).

S&F CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

S/F CI cowl of 100mm bore complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

Taking down soil pipe/ rainwater pipes (any size or pattern ) including all fittings heads shoes bends swan -necks etc including cleaning or refixing or removal to store (measured over all fixed along the centre line over fitting complete all as specified and as directed.

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building).

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building).

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

S&F block boards 18 to 19 mm thick, grade 2 quality, interim or grade, commercial type, fixed with screws to timber frame-work( as in cup board) incl taking down old one.

S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

S & F Continuous (piano) hinges in brass bright finish ,width of flap 40 mm complete all as specified and directed

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer in brass polished and bright finished complete all as specified and directed.

S&F multi purpose cupboard lock ( Brass finish) of 65 mm size in 4 lever complete all as specified and directed

S&F cupboard magnets heavy duty complete all as specified and directed

S&F brass flush tower bolt, type 2 and fixed flush long, heavy duty complete all as specified and directed

S&F hydraulic cabinet hinges any size complete all as specified and directed

M&L for 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Supply and fix bands, straps, supports or stays for cupboard , drawer , hanging shelf etc including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for providing and fixing Stainless steel railing, grade 304 with various type of elegant design/ pattern with pipes/rod/ strip for different staircase, cutouts area, balcony etc fixed by inserting in holes of required size and grouted in cement mortar 1:3/bolt, nuts and to be covered with stainless steel cap of required size all as directed and specified.

S&F for 12mm thick toughned glass as in hinged doors, partitions, automatic doors, in stairs railing and similar work including cutting to shape, drilling holes required complete all as specified and directed.

Dismantling Structural Steel Work including Doors, Gates , MS Grills in stair and in wall etc but excluding Framed Truss etc. complete all as specified and as directed.

Dismantling AC/ galvalume corrugated roof sheets as in roof coverings including AC ridge complete all as specified and directed.

Supply and fix fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed.

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed.

S&F in repair 15mm Bib tap cast copper fancy type chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs. complete all as specified and directed . Make: Prayag Cat No 5308 or equivalent make specified in tender.

S&F in repairs Pillar tap fancy type chromium plated with capstan head, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes 15 mm bore dia. Complete all as specified and directed . Make: Prayag Cat No 5302 or equivalent make specified in tender.

S&F in repair Stop valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair Angle valve cast copper chromium plated alloy15mm dia, screwed down, high pressure capstan handle, screwed both ends for iron pipes or for unions and fixed with long shank and cup complete all as specified and directed.

S&F 25mm dia brass decorative type curtain rod alongwith and supports and rings at a gap of 4" (Make: Vista Sheer wood) glass fixed with necessary beadings complete all as specified and directed.

S&F in Brass decorative bracket for fixing curtain rod fixed to wall with screw, nails etc complete all as specified and directed.

S&F in repair Chromium plated brass central hole basin mixer with pop-up- waste system with 450 mm long copper pipe and brass nut etc fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed. Make- Jaquar Cat no-KUP-35011BPM and CERA cat no- F9050452 or equivalent make specified in tender.

S&F In repair CP bottle trap casted heavy 32mm/ 190mm pipes complete all as specified and directed (Make : Jaqur cat no- ALD-CHR-769L250X190 and Ess Ess Cat No C-231)(Chrome) or equivalent make specified in tender.

S&F in repair concealed stop cock with flange CP for 15mm bore pipe complete all as specified and directed (Make : Jaqur cat no- ALD-083FT and Ess Ess Cat No. C-253A) or equivalent make specified in tender.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed.

Taking down shutter and re-fixing in the same opening after necessary repair like easing etc. area exc 1 sqm but not exceeding 2 sqm each completed all as specified and directed.

S&F 35mm thick Factory made 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) completed all as specified and directed.

S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed paneled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated completed all as specified and directed.

M&L preparing old wooden surfaces of any description not otherwise described over 10 Cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L two coats of french polishing on old wooden surfaces of any description, width or girth including cleaning and scrapping the same by machine paper, sand paper of different grades , water paper etc ,filling of stop/ bore holes with putty and french chalk as required quantity complete all as specified and as directed.

Preparing new surface of wood or wood based material of any description and in any position not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless symphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Cat No: OPS-WHT-15853S300UF / PARRYWARE, Model: Omega / HINDWARE, Model: SPELNDOUR) or equivalent make specified in tender.

S&F in repair vitreous china urinals, full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, CP waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long ,CP urinal spreader,15 mm Angle valve fancy type chromium plated complete all as specified and directed.

Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified.

(E/M Portion) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and as directed.

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation.

M & L for point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated sheet top cover(ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multistarnded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/Exhaust fan/ceiling fan/ call bell point point controlled by one switch Note : Wiring Color code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained.( for concealed wiring chase cutting will be measured and paid separately.)

All as per item No 105 above but for one three pin socket outlet on same board.

All as per item No 105 above but for one three pin socket out let 5 amps on independent board.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Ceiling rose surface type 3 terminals 65x20mm complete all as specified

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Switch socket outlet 3 pin 6 amp' flush type complete all as specified and as directed.

S&F Fan step regulator, 120W - 2 module complete all as specified and as directed.

S&F White cover plate with frame, 1 module complete all as specified and as directed.

S&F White cover plate with frame, 2 module complete all as specified and as directed.

S&F White cover plate with frame, 3 module complete all as specified and as directed.

S&F White cover plate with frame, 4 module complete all as specified and as directed.

S&F White cover plate with frame, 6 module complete all as specified and as directed.

S&F White cover plate with frame, 8 module complete all as specified and as directed.

S&F White cover plate with frame, 12 module complete all as specified and as directed.

S&F Metal flush box 1/2 module complete all as specified and as directed.

S&F Metal flush box 3 module complete all as specified and as directed.

S&F Metal flush box 4 module complete all as specified and as directed.

S&F Metal flush box 6 module complete all as specified and as directed.

S&F metal flush box, 8 module complete all as specified and as directed.

S&F metal flush box, 12 module complete all as specified and as directed.

M & L for point wiring with 4.00 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade for 3 Pin socket outlet 15 Amps on independent board with PVC conduit (ISI Marked) medium duty not less than 20mm dia with accessories such as elbow, tees, internal & external bend etc. of suitable size including continuous earth wire FRLS PVC insulated 4.00 Sq mm copper multi stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified. Note : 1) Wiring Color code i.e. Red for Phase, Black for neutral and Green for earth shall be maintained. 2) Necessary chase cutting for conduits if requires, shall be measured & paid separately under respective items in this schedule.

S&F modular Switch Socket combination outlet 6 pin 16 Amps flush type complete all as specified and as directed.

S&F AC Starter of 32 Amps alongwith plug top complete all as specified and as directed.

M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metallic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) chase cutting if required shall be measured and paid separately under relevant items in this schedule.

M & L for sub main wiring for three phase with single core PVC insulated unsheathed , 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metallic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit, four runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. (ii) chase cutting if required shall be measured and paid separately under relevant items in this schedule.

Supply and fix MCB SP 240V, 6-32 Amps capacity complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity 40 to 63 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F sheet metal enclosure of Bus bar of SPN 8 way including flushing in wall complete all as specified and as directed.

S&F sheet metal enclosure of 12 way TPN DB including flushing in wall complete all as specified and as directed.

Supply and fixing TPN /FP 100 AMP 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed.

Cutting chases for concealed conduit wiring and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed.

Supply and fixing LED panel light fittings span is recessed and surface LED 1x4 Ft Panel ceiling light with high performance, commercial grade solution suitable for hospitals, schools, offices and so much more. (>100 lm/W). also available in warm white and natural white complete complete all as specified and as directed.

S & Fix Energy efficient light fitting (LED ) Sleek type of capacity 36 W fitting 4FT with extruded Aluminium Hosing Lamps, driver, connector etc incl hanging/Fixing arrangement with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting through suitable size flexible PVC pipe making good to wall for old fitting including taking down old fitting of complete all as specified and directed. Make Philips Model No 581951 36 W ( Philips Ultron edge 4 ft LED wall Light or equivalent make specified in tender.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete Make Havells cat No VENUSNEOHE2x2R36W LED 857PIR SENSOR or equivalent make specified in tender.

Supply and fixing LED luminaire track light of 10 W in WW colour ,black in finish 220 V AC complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and as directed.

Supply and fixing LED luminaire down lighter of 7 W in WW colour ,36 degree beam angle tiltable, 220 V AC complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete. Make Jaquar Cat No LETS36R003XW or equivalent make specified in tender.

Supply and fixing LED luminaire wall light with E-27 base threaded bulb with die cast aluminium housing with glass diffuser and black in colour with IP 43 protection including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and as directed.

Supply and fixing LED luminaire ceiling light of fancy type including LED 3 W inbuilt black in colour including necessary connection with driver along with three core flexible copper conductors of suitable size complete. Make Jaquar CHL-BLK-11086X3 or equivalent make specified in tender.

S&F LED Bldg security light fitting 35/36 Watts, in pressure die cast aluminium housing with PMMA lens and toughened glass/PC cover having TOP opening separate driver compartment, with integrated constant current electronic driver, incl providing new GI pipe bracket as per existing size including necessary electrical connection with suitable size copper wire complete all as specified and directed and complying with the following specifications:-. (a) minimum efficacy 140 lumen/watt (b) CRI not less than 70, (c) THD < 30% (c) having in built short circuit & surge protection upto 5 kV (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Impact resistance IK 08. (f) Weather protection grade: IP66 Make Havells/ CG/ Jaquar/ Surya.

Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.0mm GI wire (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 5 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

DEB AND COMPANY (BID ID -3067509)

UNIVERSAL TRADING CENTRE (BID ID -3068106)

DUTTA & DUTTA (BID ID -3067073)

JOY RAM ENTERPRISE (BID ID -3067674)

RAJ ENTERPRISE (BID ID -3069279)

MS HORIZEN (BID ID -3066991)

GHOSH ENTERPRISE (BID ID -3066266)