REPAIR TO PLUMBING, JOINERY, SUCH AS WOODEN / ALIMINIUM DOORS, WINDOWS, CUPBOARDS, CURTAIN ROD ETC IN MD ACCN AT VARIOUS LOCATIONS UNDER GE (MCTE) MHOW

Amount

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sq. m each of any description complete all as specified and directed.

Taking down Shutters of any description exc 2 sq. m each and refixing in the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

S&F Pressed steel door frame for door, size 105 x 60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3 mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.

S&F Pressed steel door frame for door, size 165 x 60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.complete all as specified and as directed.

M & L PCC 1:2:4 type B0(12.5 mm graded) aggregate for filling in pressed steel door framed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S & F 35 mm thick second class hardwood rail and style , Plain, framed, panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

M&L for Preparation of new wood or wood based surfaces of any description over 10cm or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

Solid PVC door frame of size 50mm 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing.,complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing.

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section.complete all as specified and directed.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section.complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.complete all as specified and directed.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.complete all as specified and directed.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel.complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type.complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type.

S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.50mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.50mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter -01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall – 06 No per window.

Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified.

M&L Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

M&L Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed .

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 18mm thick factory made PVC sheet one side pre-laminated sheet cabinet shutter, bent at 90 degree and finish all edges at level for marking edge lipping for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc, incl 04 nos of magnet for shutter complete all as specified and directed .

S&F factory made PVC shelf / partition plane board of required size consisting of panel of 18mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporti g the hold of shelf / partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 Kg /Cum manufactured by ISO 9001 - 2015 certified company, using solvent cement etc.

S&F Brass handles 100 mm size cast type, polished bright as approved by Engr in Charge complete all as specified and directed.

S&F Met craft stainless steel pluton Heavy Soft close Hydraulic concealed Hinges for full overlay of door complete all as specified and as directed.

S&F in repair Stainless steel curtain rod/rail 25 mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fixed in steel/ alumninium windows with necessary fixing adhesive and wooden window with necessary wooden beading and fillets etc in square n exc 0.5 Sqm in each pane,complete all as specified and directed.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty and fixed in steel/ alumninium windows with necessary fixing adhesive and wooden window with necessary wooden beading and fillets etc in square n exc 0.5 Sqm in each pane.complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples .complete all as specified and directed .

M & L in fixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including wooden beading fixed with screws to timber frame work, complete all as specified and directed.

S & F in repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed .

S & F in repair 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F in repaire 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F in repaire 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised. complete all as specified and directed .

S&F in repairs Helical door spring 300mm, ordinary rat tail rod patttern springs includding roller and roller plate ,complete all as specified and directed .

S&F in repaire 150 mm floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,complete all as specified and directed.

Supply and fix in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. ,complete all as specified and directed .

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) upto 4th floor. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site)

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L preparation of new surfaces pf plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl wall care putty all as directed by Engr-in-Charge .

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed

M&L Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:6 Complete all as Specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles,complete all as specified and directed .

M&L for vitrified tiles of any colour / shade 10mm thick (square / rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick bedding layer in cmeent sand mortar 1:6 complete all as specified and directed.

M&L for vitrified tiles of any colour/shade 10mm thick (square / rectangular) area of each tile not exceeding 0.36 sqm, in skirting or on vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 10 mm thick bedding layer in cmeent sand mortar 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile ,exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 ,complete all as specified and directed .

-ditto- all as per item no 58 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- all as per item no 60 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles (colour as approved laid in pattern as approved by GE ) size 300mm x 450mm x 7 mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M &L for Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B1 (Using 12.5 mm graded granite stone aggregate) in path , paving , hardstanding etc, complete all as specified and as directed.

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted, bed of crushed stone, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight complete all as specified and directed.

S&F, solid PVC wall panelling consisting of 5mm thick plain colour PVC sheet fillet of wight 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface ,complete all as specified and directed.

Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls upto any height.(Note : Rate shall be included for necessary scaffolding and safety measures where required at site ) ,complete all as specified and directed.

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping of distempered and painted surface old plastered / decorated surface and applying one coat wall care putty and papering for smooth finished of the surfce and applying two coat of distemper oil emulsio over a coat of primer complete all a specified and as directed.

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site), complete all as specified and directed.

M&L for preparation of old surface of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applying one coat of Premium Acrylic smooth exterior paint complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ) ,complete all as specified and directed.

M&L preparation of old plaster surfaces of wall and applying one coat of white wash all as directed .

Taking down existing water proofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed

Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres as directed by Engineer-in-Charge.

M&L for 10 mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete.complete all as specified and directed.

M&L for PCC 25 mm thick (1:2:4) type B0 using 12 mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting /making proper slope on roof/chhaja and roof kerbs/benching complete all as specified and directed.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface.NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

M & L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

M & L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors ,complete all as specified and directed.

M&L points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same , complete all as specified and directed

BHATIA ASSOCIATES

Sudarshan Associates