Providing fixing tiles and other miscellaneous work in room no. 31, 35, 26 and 29 in Central Office, B.H.U

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: SUPERINTENDING ENGINEER, U.W.D., B.H.U.

Name of Work:- Providing & fixing tiles and other miscellaneous work in room no. 31, 35, 26 and 29 in Central Office, B.H.U.

Tender Reference No.:- UWD/2026/19012026-8

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

0.00;[Re31]0.00 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (11.41.2) sqm 0.99;[Re19]0.99 Excess(+) Full Conversion INR

0.00;[Re1]0.00 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.: Size of Tile 600x600 mm (11.46.2) sqm 0.00;[Re27]0.00 Excess(+) Full Conversion INR

0.00;[Re2]0.00 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) (6.12.2) sqm 0.00;[Re29]0.00 Excess(+) Full Conversion INR

0.00;[Re3]0.00 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (13.4.2) sqm 0.00;[Re29]0.00 Excess(+) Full Conversion INR

0.00;[Re4]0.00 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) (13.5.2) sqm 0.00;[Re18]0.00 Excess(+) Full Conversion INR

0.00;[Re5]0.00 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (15.2.1) Cum 0.00;[Re25]0.00 Excess(+) Full Conversion INR

0.00;[Re6]0.00 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below (15.13.1) Each 0.99;[Re18]0.99 Excess(+) Full Conversion INR

0.00;[Re7]0.00 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (18.32.1) Each 0.99;[Re21]0.99 Excess(+) Full Conversion INR

0.00;[Re8]0.00 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (18.33.1) Each 0.00;[Re7]0.00 Excess(+) Full Conversion INR

0.00;[Re9]0.00 Providing and fixing 100 mm sand cast Iron grating for gully trap. (17.29) Each 0.00;[Re19]0.00 Excess(+) Full Conversion INR

0.00;[Re10]0.00 Providing and fixing soil, waste and vent pipes : 100 mm dia: Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (17.35.1.2) Metre 0.99;[Re21]0.99 Excess(+) Full Conversion INR

0.00;[Re11]0.00 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :100 mm (17.58.1) Each 0.00;[Re27]0.00 Excess(+) Full Conversion INR

0.00;[Re12]0.00 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. : All kinds of soil. (2.8.1) Cum 0.00;[Re9]0.00 Excess(+) Full Conversion INR

0.00;[Re13]0.00 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (4.1.3) Cum 0.99;[Re25]0.99 Excess(+) Full Conversion INR

0.00;[Re14]0.00 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (13.88) sqm 0.99;[Re18]0.99 Excess(+) Full Conversion INR

0.00;[Re15]0.00 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (13.80) sqm 0.00;[Re30]0.00 Excess(+) Full Conversion INR

0.00;[Re16]0.00 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (13.41.1) sqm 0.99;[Re28]0.99 Excess(+) Full Conversion INR

0.00;[Re17]0.00 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (13.99.1) sqm 0.99;[Re9]0.99 Excess(+) Full Conversion INR

0.00;[Re18]0.00 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (9.48.2) Kg 0.99;[Re18]0.99 Excess(+) Full Conversion INR

0.00;[Re19]0.00 Removal of large no. of steel almirah full with very old worn out/termite infested records. (M/R) Each 0.00;[Re29]0.00 Excess(+) Full Conversion INR

0.00;[Re20]0.00 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) (21.1.1.2) Kg 0.00;[Re30]0.00 Excess(+) Full Conversion INR

0.00;[Re21]0.00 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) (21.1.2.2) Kg 0.00;[Re8]0.00 Excess(+) Full Conversion INR

0.00;[Re22]0.00 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (21.3.2) sqm 0.99;[Re3]0.99 Excess(+) Full Conversion INR

0.00;[Re23]0.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm (9.97.4) Each 0.99;[Re20]0.99 Excess(+) Full Conversion INR

0.00;[Re24]0.00 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (9.100.1) Each 0.99;[Re4]0.99 Excess(+) Full Conversion INR

0.00;[Re25]0.00 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (5.22A.6) Kg 0.99;[Re13]0.99 Excess(+) Full Conversion INR

0.00;[Re26]0.00 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (5.1.2) Cum 0.00;[Re4]0.00 Excess(+) Full Conversion INR

0.00;[Re27]0.00 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform (5.9.3) sqm 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re28]0.00 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (14.81) Each 0.99;[Re6]0.99 Excess(+) Full Conversion INR

Total in Figures Excess(+) Full Conversion INR

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information