Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-AOC | L1 | Accepted-AOC DUE TO LOWEST BID | |
| 2 | L2₹28.1 L+₹1.6 L (5.85%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER BID | |
| 3 | L3₹29.0 L+₹2.4 L (9.10%)Rejected-Finance | L3 | Rejected-Finance DUE TO HIGHER BID | |
| 4 | L4₹29.0 L+₹2.5 L (9.24%)Rejected-Finance | L4 | Rejected-Finance DUE TO HIGHER BID | |
| 5 | L5₹29.6 L+₹3.1 L (11.7%)Rejected-Finance | L5 | Rejected-Finance DUE TO HIGHER BID |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
18 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST FEROZEPUR CANTT
GE WEST FEROZEPUR CANTT
CERTAIN REPAIR RENEWAL WORKS TO UNITS OF AM AF AND AP UNDER AGE BR I OF GE WEST FEROZEPUR CANTT
2022_MES_522545_2
802022/GE-33/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST FEROZEPUR CANTT
₹60,000
Yes
3 Sept 2022
5 Aug 2022
20 Aug 2022
5 Aug 2022
18 Aug 2022
12 Aug 2022
60 days
Amount
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.
M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth oprotection, 50 mm thick, surfaces finished even and smooth without using extra cement complete all as specified.
M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified.
Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc.
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note :- Sand will be measured and paid seperately
M&L sand filling under floors or in foundations including watering and consolidation
M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats,bed blocks, coping etc including necessary form work complete all as specified.
Dismantling brick work built in cement mortar of any specification and in any position complete all as specified.
M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.
All as per item No. 9 but using old bricks retrieved from item no 8 demolition including cleaning and removal of mortar from old bricks.
M & L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.
M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.
M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.
M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.
M & L of Glazed coloured and cereamic tiles in vertical surfaces 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed
M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick rendering (1:4) and jointed with ditto as per above item no 17
M & L Chequered cement concrete coloured tiles 20 cm x 20 cm x 25 mm thick using grey cement and no pigment set over & including 20 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed.
M & L Granite (of any type) tiles 16- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:4) complete all as specified.
S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.
M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.
Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm complete all as specified and directed.
All as per item No 23 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.
Taking down shutters of any description and refixing in the same opening exc 1 sqm and not exc 2 sqm each complete all as specified and directed.
Taking down Shutters of any description n exc 1 sq. m each
All as per item No. 26 but exc 1 sq. m and n exc 2 sq. m each
S&F factory made Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.
All as per item above 28 here-in-before but size 125x60mm with double rebate.
All as per item above 28 here-in-before but size 75x50mm with single rebate.
S&F factory made Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.
S& F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.
S& F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.
S& F PTMT handle 125mm long fixed with steel screws complete all as specified.
S& F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed
S&F factory made 30 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.
S&F factory made 30mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers ,size of member of shutters as specified in SSRpart-1section 8.24 suplied and fitted to chaukhat complete all as specified .
S&F factory made of 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed.
S&F factory made 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.
S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
S&F Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified.
S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.
S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.
S&F 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.
S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
S&F mild steel pressed handle ,oval type ,125 mm stoved enameled black and fixed with steel screw complete all as specified
S&F MS barrel tower bolts stone enamelled black with bright bolt,200mm length of bolt.
S & F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.
S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B21 Specified and directed.
S&F butt hinges 125mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B-21 all as Specified and directed.
S&F door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 850mm thick in width and of weight between 36 to 60 kg of aluminium (Die cast body) in repairs
S&F 300mm mild steel rait rail rod pattern springs including roller and roller plate as fixed in repair complete all as specified.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
M&L 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.
S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified
S &F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm incl. incl hacking out old broken glass and putty/beading complete all as specified.
S &F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.
Demolition of boarding of any description and in any position complete all as specified.
S& F 25mm thick boarding second class hard wood & fixed with nails in any situation clean sawn with butt joints fixed in shelves partitions and shelves of built in cup boards almirahs book cases toilet boxes racks ,pelments and similar work complete all as specified
S & F 14-16 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE
Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .
S & F in rep of Gypsum Board 6 to 7 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge. Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.
S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
S&F galvanised steel water tubes 25 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.
Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.
All as item 70 herein before but 20mm dia.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.
S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified.
S&F in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.
S&F in repair PVC connection both end brass union and length 450 mm long for 15 mm bore pipe.
S&F in repair Bib tap of CP brass, 15mm bore, fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified. .
S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.
S&F in repair Rotational moulded triple layered Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.
S&F in repair Rotational moulded triple layered Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.
Removing & refixing of existing water tank of capacity 500/250 Ltr etc setting aside (or lowering if required) for repair, cleaning etc and hoisting reconnecting & refixing in position.
S&F15mm bore dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm- 125gms). as fixed in repairs and all as specified
S&F 15mm bore dia Stop valve of PTMT with long shank and cup(Concealed type) (minimum weight 15mm-110Gm-20mm-112 gm any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) as fixed in repairs all as specified.
S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.
S&F Vitreous china white wash down water closet (pedestal pattern) including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.
S&F 1.00 mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as in repair complete all as specified.
S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs and all specified and directed.
S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.
S&F 20 mm Mild steel curtain rod PVC powder coated curtain rod with fancy type brackets including with all fittings as fixed in repair and all as specified and directed by engineer in charge
S& F PVC end cups fancy type for curtain rod as in repaire complete all as specified
Dismantling plain or corrugated sheet on roof covering complete all as specified and directed.
S & F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J- type or L- type hook bolts complete all as specified and directed.
S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
Providing and fixing 0.71 mm thick Precoated colour or mill finish Aluminium Ridges plain (500-600mm) of alloy IS designation 31500, Aluminium Alloy (AA) 3004 (ISO designation). For colour, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size M6, 60 mm long with 3 mm EPDM seal and SS plain washer. →
Dismantling of steel work including doors ,gates but excluding framed truss complete all as specified and directed by Engineer in Charge
S&F Rolled section as in post /pillars where connected with angle cleat or other connecting plate etc of fe 410-W(grade E-250)quality 'B' including fabrication , erection and fixing complete all as specified and directed by engr-in- charge
M&L Roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle channel or flat sections) inclusing distance pieces,cleats etc Fe 410-W (Gde E-250) quality A complete all as specified and directed.
S&F rolled mild steel plates Fe 410 -W (Gde-E- 250) quality- A(plain or chequered) channels, square cut or notched (ordinary and counter sunk ) forming holes without any attachment complete all as specified.
S&F Mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and n exc 22.5cm long complete all as specified.
Cutting chases pinning in making good to facings where required and pointing in CM(1:3) to for concealed water tubing or concealed conduit wiring etc.., and making good cutting not exc 10cm girth.
M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red lead primed steel surfaces complete all as specified.
M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Material and labour rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces compound finished fair and even all as as specified.
Material and labour rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfasces finished even and smooth (without using extra cement ) all as specified and directed.
M&L Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc complete all as specified & directred.
M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.
M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.
M&LPreparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.
Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.
M&L for brushing neat cement slurry with 3 kg of cement per square metre
M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately
M/L for 10mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 mixed with water profing comund @3% by weight of cement content as in verticle surfaces and finished even and smooth without using extra cement. Note: WPC measured and paid seperately.
Supply only water proofing compound.
M&L Polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and directed.
M&L Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 1.2 kg per square metre including preparation of roof surfaces complete all as specified and directed.
M & L for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete.
S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.
All as item No 120 here in before but except tiles
Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided
M&L 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement. Note:- WPC shall be measured and paid separately.
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
M&L PCC (1:5:10) type E-2 (using 40 mm graded aggrigate ) as in filling under sunken portion
M&L 25mm tick PCC(1:2:4)type B1 using 20 mm graded aggrigate as in floor finished even and rough to receive top layer complete all as specified
CHETAK CONSTRUCTION COMPANY
M/s Manoj Construction Co.
Kansal Enterprises
KAILASH CONSTRUCTION COMPANY
Ms Hari Singh
JAWAHAR CONSTRUCTION COMPANY
V V AND COMPANY
Brar Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .