Construction of Cow Sanctuary at Kheri Tehsil Sujanpur Distt. Hamirpur (HP)

Amount

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in 15cm (fifteen centimetres) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of materials with in all leads and lifts, disposed materials to be neatly levelled including all incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete mechanically mixed 1:6:12 ( one cement : six sand: twelve graded stone aggregate 40mm(forty millimeters nominal size) and curing complete excluding cost of form work in under floor and plinth beam as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Brick work using 2nd class common burnt clay building bricks in foundation and plinth in :- Cement Mortar 1:4 (one Cement : four Sand) in all heights and depth as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax,GST, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm. (three point fifteen millimeters )thick welded with angle iron in frames 30x30x5mm. (thirty into thirty into five millimeters) so as to give a fair finish including centering, shutering, strutting and propping and centring etcetera with wooden battens and ballies in all heights below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work up to all floor level in all heights in beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in all depth and all heights as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:1.5:3 (one cement :one and half sand :three graded crushed stone aggregate 20mm.(twenty millimeters nominal size)mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in lintels, beams girders bressumers and cantilevers upto floor any level as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST sale tax or other taxes imposed by the Government.

Providing Tor steel reinforcement made of Tata tiscon/sail for R.C.C. work including binding wire bending, binding and placing in position complete upto all floor level as per direction of Engineer- in –Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto floor any level in :- Cement Mortar 1:4 (one Cement : four Sand) up to all as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Stone soling under floor as per direction of Engineer- in –Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete mechanical mixed and vibrated 1:3:6 (one cement: three sand: six graded crushed stone aggregate 20mm (twenty millimeters) nominal size and curing complete excluding cost of form work in foundation and plinth as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and laying mechanically and vibrated design mixed cement concrete M-20 (M-twenty) and curing complete excluding the cost of form work and reinforcement for reinforce concrete work upto all floor level in all heights complete as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing 0.60mm ( zero point six zero millimetre )thick prepainted steel sheet in roofing made of tata/durasine with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5(five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet and rubber washers complete with all accessories as required as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing ridges or hips 90 cm (ninety centimeters) overall with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets made of tata/durasine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5(five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeters) dia and prepainted G.I. limpet and bitumen washers complete with all accessories as required as per direction of Engineer- in -Charge, including entire carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing flashing 38cm (thirty eight centimeters) overal lmade of tata / durasine steel with 0.60mm (zero point six zero millimeters) thick prepainted sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20(twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) micron over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeters) dia meter and prepainted G.I. limpet and bitumen washers complete in all heights with all accessories as as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing MS B.P. sheet 1.66mm to 2mm (one point six six millimeter into two millimeter) thick of tata/sail in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete up to all heights as per the instruction of Engineer-in-charge (base members of steel work shall be measured and paid separately), as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Steel works made of tata/sail in welded in built up section trusses and framed work including cutting hoisting fixing in positions and applying a priming coat of red lead paint in truss and trussed purling as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels made of tata brand 20 mm X10 mmX2mm(twenty into ten into two millimeters) and braced with flat iron diagonals 20 mm X5 mm (twenty into five millimeters) size with top and bottom rails of T-iron 40 mm X40 mm X6 mm( forty into forty into six millimeters) with 38 mm (thirty eight millimeters) dia steel pulley complete with bolts and nuts locking arrangements, stoppers ,handles, including applying a priming coat of red lead paint as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Spray painting two coats (excluding priming coats) on new steel and other metal surfaces with enamel paints made of Nerolac/Assian paint spraying to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter With enamel paint other than white, as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST sale tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new wood and wood based surfaces ,with ready mixed paint made of Nerolac/Asian paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping With white paint as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Applying one coat of Acrylic primer made of Nerolac/Asian paint (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete in all heights as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion made of Nerolac/Asian paint of approved design on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete up to all floor level in all heights as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

15mm (fifteen millimeters) cement plaster in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 (one cement: four sand) as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enamelled iron butt hinges with necessary screws. 40mm thick (forty millimeters) in 2nd class deodar wood as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Constructing course rubble hammer dressed ‘U’ shape open surface drain with side wall, 15x22cm (fifteen into twenty two centimeter) in cement mortar 1:6 (one cement: six sand) and inside plastering with cement plaster 1:3 (one cement: three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement: five sand: ten graded stone aggregate) of 40mm (forty millimeters) nominal size and finished with a floating coat of neat cement complete as per standard design, as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) fenolex/ vectus rain water pipes of working pressure not less than 4kg/per centimetre square (four kilogram per centimetre square ) including filling the joints with approved adhesive complete 100mm (one hundred millimeters) size in all heights as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor galvanized mild steel made of tata tubes (medium grade) tube fitting and clamps including making good the wall ceiling and floor:- Bore as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

15mm (fifteen millimetre) nominal

20mm (twenty millimetre) nominal bore outter side the sheds

Providing and laying in trenches, galvanized mild steel tubes (Medium grade), tube made of tata fittings (earth work in trenches to be measured and paid for separately), as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

15mm (fifteen millimetre) nominal bore L/S

20mm (twenty millimetre) nominal bore L/S

Fixing water meter stop-cock made of Jaquar/Esses in galvanized mild steel tube including necessary fittings such as mild steel galvanized jam nut, sockets, etc. cutting and making long screws complete (water metre and stop cock to be measured and paid for separately) 15mm (fifteen millimetre) nominal bore, as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing C.P. brass bib tap with capstan head of 15mm (fifteen millimeters) dia of Cera/jaguar or hindware make complete in all respect as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel, made of Jaquar/Esses as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

15mm (fifteen millimeter) nominal bore

Providing and fixing G.I./M.I. union made of UNIK/AVR of following sizes (where not including in the items), as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

15mm (fifteen millimeters).

20mm (twenty millimeters).

Construction chambers 300mmx300mmx500mm (three hundred millimetre into three hundred millimetre into five hundred millimetre) inside size of stop cock with C.I. surface box 100mmx100mmx75mm(one hundred millimetre into one hundred millimetre into seventy five millimetre) (in side) with hinged cover fixed in cement concrete slab 1:2:4 (one cement: two sand: four graded stone aggregate 20mm (twenty millimetre) nominal size 75mm (seventy five millimetre) thick foundation concrete 1:5:10 (one cement: five sand: ten graded stone aggregate 40mm (forty millimetre nominal size) as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

With 100mm (one hundred millimeters) cast in situ plain cement concrete walls in 1:2:4 (one cement: two sand: four graded stone aggregate 20mm (twenty millimeters) nominal size complete with form work.

Constructing chamber 600mmx600mmx750mm (six hundred into six hundred into seven hundred fifty millimeters) inside size for fire hydrants with C.I. surface box 350mmx550mm (three hundred fifty millimeters into five hundred fifty millimeter) top and 165mm (one hundred sixty five millimeters) deep (in side) with changed lid and RCC top slab 1:2:4 (one cement: two sand: four graded stone aggregate 20mm (twenty millimeters) nominal size 100mm(hundred millimeters) thick foundation concrete 1:5:10 (one cement: five sand: ten graded stone aggregate 40mm (forty millimeters) nominal size and inside plastering with cement mortar 1:3 (one cement: three sand) finished with a floating coat of neat cement including curing complete, as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

With 150mm (one hundred fifty millimeters) thick walls of reinforced cast in situ plain cement concrete walls in 1:2:4 (one cement: two sand: four graded stone aggregate 20mm (twenty millimeters) nominal size complete with form work and reinforcement with 6mm (six millimeters) bars not exceeding 150mm (one hundred fifty millimeters) centres both ways,

Providing and laying cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 40mm (forty millimeters) nominal size in haunching of S.W. pipes of the following internal diameters, including concrete for beddings necessary form work and curing complete 300mm (three hundred millimetre), as per the direction of Engineer-in-Charge and including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (one cement: two sand: four graded crushed stone aggregate 20mm(twenty millimeters) nominal size)Inside size 800mmx800mm (eight hundred millimeters into eight hundred millimeters) and 500mm(five hundred millimeters)deep including C.I. cover with frame.(light duty single seal pattern 1) 455mmx610mm(four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38kg.(thirty eight kilogramme) (weight of cover 23kg.(twenty three kilogramme) and weight of frame 15kg.(fifteen kilogramme) foundation concrete 1:4:8 (one cement: four sand: eight graded crushed stone aggregate 40mm (forty millimeters ) nominal size inside plastering 15mm(fifteen millimeters) thick with cement mortar 1:3(one cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix(one cement: two sand: four graded crushed stone aggregate 20mm(twenty millimeters nominal size) finished smooth complete including curing and testing: as per direction of Engineer- in -Charge, including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government.

With 200mm(two hundred millimeters) precast concrete block masonry walls with solid concrete blocks of cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 20mm (twenty millimeters) and down gauge laid in cement mortar 1:6 (one cement: six sand).

PANKAJ KUMAR