REPAIRS TO BDY WALL PATH AND DRAIN FENCING OTM MD ACCN UNDER AGE BRII UNDER GE SOUTH UDHAMPUR

Amount

Demolition of Bricks or stone masonry built in cement mortar complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and as directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc, and area n.exc 10 Sqm on plan and getting out in any type soil complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick all as specified and as directed.

Removing excavated soil to a distance n exc 50m and depositing where directed at a level not exc1.50m above the starting point complete all as directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete type D2 (1:4:8) for 100 mm dia pipe all as specified and as directed.

All as per Srl item No 9 above but 150mm dia drain pipe all as specified and as directed

All as per Srl item No 9 above but 200 mm dia drain pipe all as specified and as directed.

M&L for SGSW drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and as directed

All as per Srl item No 09 above but 150mm dia all as directed.

All as per Srl item No 09 above but 200mm dia all as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm dia SWG pipe all as specified and as directed.

All as per Srl item No 16 here in before but 150mm dia complete all as specified and as directed.

All as per Srl item No 16 here in before but 200mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in trenches bore of the pipe 75 mm complete all as specified and as directed.

S&F PVC(SWR) bends 110 mm dia with access door complete all as specified and as directed.

S&F PVC(SWR) junction double,(Single T), equal or unequal. 110 mm dia complete all as specified and as directed.

S&F for PVC (SWR) gully trap of I25/110 mm dia set and jointing with solvent cement complete all as specified and directed.

M&L Soakage wells of size 2.4 M dia X 3.0 M effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and as directed.

M&L 25 user conventional type on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 25 users complete all as specified and as directed.

Cleaning of gully traps/drain pipes/floor traps/water closets/manholes/ of any size and any description and removing waste material etc to a distance not exceeding 50m and burying in pits and re-filling the same complete all as specified and directed by the Engr-in-Charge . Note:- The cost for excavation and earth work for pits is deemed to be included in the unit rate. (b) Contractors representative/ Engineer will report to Engr-in-Charge/ concern JE daily in morning to collect complaint for routine/urgent works related to day to day maintenance till completion of contract. (c) All routine/urgent jobs received on docket slip shall be attended within 24 hrs. If the nature of job is such that which cannot be completed within 24 hrs, it shall be immediately brought in to the notice of Engr-in-Charge, (d) The period for working to the such complains shall be decided by GE/Engr-in-Charge. If delay is more than 24 Hrs & GE/Engr-in-Charge is not satisfied with reason for delay in working then the penalty of Rs. 300/complaint/day shall be recovered from contractor. (e) In case of any dispute arising from above the decision of Accepting Officer shall be final and binding.

Desludging/Dewatering of septic tank/soakage wells including intel/outlet chambers removing out all scum, silt residuals sludge (both) organic/inorganic nature) after plugging the incoming sewage lines through combined high pressure water jetting cum suction (vacuums) type machine mounted on LCV/HCV facility of high pressure vacuums and removing the same in the tank to a place outside MOD load meant for the purpose by local municipality all as directed by Engr-in-Charge.

M&L brick work with sub class 'B' brick, straight or curved on plan exc 6 M Mean radius built in type CM 1:6 complete all as specified and as directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc 6 M Mean radius built in type CM 1:4 complete all as specified and as directed.

All as per srl item No 28 above but except brick only complete all as specified and as directed.

M&L for walling of random rubble masonary, Squre, recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

All as per srl item No 14 above but except stone masonry complete all as specified and as directed.

M & L for hand packing (any thickness) of broken stone or boulder at back of walls over arches etc and raising (or lowering) to the required level all as specified and directed

M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement as in manholes, septic tank, filter bed out let drain, bdy walls, drains etc all as directed

M&L for raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) complete all as specified and as directed.

M&L for extra over hammer dressed facings, with maximum depression on face from straight edge held against the dressed surface n. exc 20 mm; to block-in-course masonry complete all as specified and as directed.

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills,seismic and other similar bands, plinth courses, copings, Bed blocks, and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M & L for RCC 1:2:4 using 20mm graded aggregates as in Foundations including rafts, footings foundation, beams, plinth beams , bases for columns etc, basement slabs, under - reamed piles and mass concrete complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams , sides and soffits (if any) foundation and plinth beams and similar work vertical or to batter finished surfaces of concrete complete all as specified and as directed.

M & L for flat formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover, septic tank covers slabs, drain cover slabs etc including necessary form work and set in CM (1:4). (Note:- reinforcement will be measured and paid separately.)

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as directed.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and as directed.

M&L Cement concrete type D 2 (1:4:8) (using 40mm graded stone aggregate) as in foundation filling and mass concerete complete all as specified and as directed.

M&L for Plain cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in surface chanels and drains, manhole complete all as specified and as directed.

M & L Plain cement concrete type-B1(1:2:4) (using 20mm graded stone aggregate ) as in benching, haunching , coping, edging of path and similar work incl necessary form work complete all as specified and directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for chequered cement concrete (glossy finish) tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and as directed.

M&L for heavy duty coloured (Dura stone) tiles n exc 0.36 Sqm of 10-15mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for 3D wall cladding coloured tiles (stone series) 300mm x 450mm x 7mm or 300x600x7-10mm thick (design and size as approved by Engr in Charge) as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 or chemical adhesive like Ultratech Tilfixo/Asian Paint Smartcare tile adhesive complete all as specified and as directed.

M&L for framed work such grill, griting as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding eith and including either hooks and hinges or steel hanging door fittings including ornament and intricate design, including pintle hings, stops hand made sliding bolts etc conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M & L hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc complete all as specified and as directed.

S & F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any descripton not otherwise described over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces complete all as specified and as directed.

M&L for mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. complete all as specified and directed

M&L for PCC 1:2:4 Type B2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Precast cement concrete louvers and jallies 25mm thick set in cement mortar 1:4 type B0 (1:2:4 using 12.5mm graded aggregate etc sample as approved by GE incl takong out old precast jali complete all as specified and directed.

M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

S&F Stainless Steel box type writing letters (Block, Romen, Italic or Indian) of size 300-450mm hight, 50mm wide and 10mm depth(thick) or 3D LED illuminated glow sign board acrylic letters (size & design as approved by Engr in charge) complete all as directed.

M&L for Aluminium Composite Panel (ACP) wall cladding/facade( cut to arch shape or as directed) or in ceiling with sunk or raised moulding/cop design as approved by GE of 6 mm thick HPL sheet, aluminium cover sheet thickness 0.5 mm, panel length 2240 mm and width 1220 mm, interior face coil coated with polyester, fixing with aluminium tube/ aluminium channel with aluminium /steel rivet/screw in any position and height in any colour including preparation of concrete surface for ACP complete all as specified and as directed.

S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling of old AC sheet complete all as specified and as directed.

M & L for mild steel round bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and as directed.

S&F of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and as directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc of 500 ltr capacity PVC water storage tank without dismantling the tank including writting the item "Tank Cleaning on ____" indicationg the date, month & year of cleanign on external wall of face of tanks walls with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc of 1000 ltr capacity PVC water storage tank without dismantling the tank including writting the item "Tank Cleaning on ____" indicationg the date, month & year of cleanign on external wall of face of tanks walls with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of water tank from site complete all as specified and as directed.

M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling of water tank from site complete all as specified and as directed.

M&L for preparation of newly plastered surfaces on wall/roof projection including facia, cornices etc and applying exterior water proof wall care putty @ 1 Kg (undiluted) per sqm of average thickness 1mm to 2mm over the plastered wall/ceiling surfaces, one or more coats and grinding the puttied surface with mechanical grinder for make the surface even and smooth for receiving primer and applying two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives & colour stay technology, excellent primer applied @0.9 litre (undiluted)/10 Sqm diluted with water as per manufacture instructions over and including priming coat of exterior primer applied @ 1.79 litre/10 Sqm diluted with water as per manufacturer instruction over and including priming coat of paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of opening single spray gun with a mix material hose length of 30 mtr the spray machine should be reputed.

Note :- The work for periodical services shall included the following and the rates quoted by the bidder shall included the same : (a) The work pertains to periodical services shall be executed by the contractor as per MOU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc approval by the GE. (b) The Contractor shall upload with the documents under cover I "Memorandum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (c) Use of scaffolding, trestle, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of nails, making good holes, cracks etc. (e) Work in patches and in narrow/width, bands, cornices, pilasters etc and cutting in edge of line where necessary.

Note :- (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floor, cleaning glass, joinery, electric fittings, wiring etc, drops and splashes of paint be cleaned to the ensure satisfaction of Engr in Charge. (h) Sample patch of 10 Sqm be repaired considering all the items of periodical and shall be got approved from GE prior to carrying out further work. (j) The work shall be carried out op to 4 storey. (k) Incl removal of vegetation on walls incl roots on wall surfaces.

khajuria builders (BID ID -3485021)

RAJ MOHD (BID ID -3480792)

MADAN LAL SHARMA AND SONS (BID ID -3490885)

RAMAN CONSTRUCTION CO (BID ID -3485603)