Construction Degree College Dhaneta Distt. Hamirpur (HP) (SH-Providing, Installation, Testing and Commissioning of Firefighting Down Comer system therein)

Providing, laying, jointing and testing & commissioning of 'C' class heavy duty MS pipe confiroming to IS 3589/IS 1239 including welding ,fitting like elbows,tees, flanges, tapers,nuts, bolts,gaskets and fixing the pipe on the wall /ceiling with suitable clamp/support frame making opening in the walls/floors/slabs or modification in the exiting opening wherever provided for carrying pipe line and painting with two or more coats of synthentic enamel paint of required shade complete in all respect as required as per best satisfaction of Engineer-In-Charge :MAKE:-TATA/JINDAL/HISSAR/ZEHITH BIRLA.

25 mm (Twenty five millimeters)

80 mm (Eighty millimeters)

100 mm (One hundred millimetres)

Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red Conforming to IS 884 complete following as required. 20 mm nominal internal dia water hose thermoplastic ( Textile reinforced ) type-2 as per IS: 12585 30 mtr long and 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connection from riser with 25 mm dia stop gun metal valve & socket.heavy duty water hose thermoplastic (Textile reinforced )type II, 20 mm dia globe valve complete as required as per best satisfaction of Engineer-In-Charge Make:MINIMAX/ TYCO/ CEASEFIRE /NEWAGE

Supply, installation, testing & commissioning of single headed Gun metal/SS.304 ISI marked odlique pattern internal/External hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per best satisfaction of Engineer-In-Charge as per IS: 5290-1983 (Type'A') Make:MINIMAX/ TYCO/ CEASEFIRE/NEWAGE

Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal/SS.304 male & female instantaneous type coupling (IS 903). Make:MINIMAX/ TYCO/ CEASEFIRE/NEWAGE as per the best satisfaction of Engineer-In-Charge.

Providing & fixing 63 mm dia Gun metal/SS.304 Branch pipe with Gun metal/SS.304 with 20 mm (nominal internal dia) Size Gun metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm as per best satisfaction of Engineer-In-Charge as per I.S 903 Make:MINIMAX/ TYCO/ CEASEFIRE/NEWAGE

Providing and fixing of fire brigade (Two way) connection of cast iron body with gun metal male instantaneous inlet coupling with cap and chain as required. For suitable dia MS pipe connection conforming to IS:904 including necessary support complete in all respect as per best satisfaction of Engineer-In-Charge Make:MINIMAX/ TYCO/ CEASEFIRE/NEWAGE

Providing, fixing ,testing and commissioning of Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect as per best satisfaction of Engineer-In-Charge hydraulically test to 20 Kg./sqcm. Make:Make:Kirloskar/Sant/Reader

100 mm Dia (One hundred millimeter diameters)

Providing and fixing Cast Iron/steel double flanged Dual Plate type with gunmetal seat non-return valve confirming to class - I of IS including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect.as per best satisfaction of Engineer-In-Charge.Make:Make:Kirloskar/Sant/Reader

100 mm Dia (One hundred millimeter dia)

Supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried as per best satisfaction of Engineer-In-Charge .Make. Zoloto/Sant/LP.

Supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried as per best satisfaction of Engineer-In-Charge . Make. H.Guru./ Systemsansor/ Fbig.

SITC Pressure switchs for Main, Jockey, and stand by Diesel pumps including necessary wiring up to control panel and Ball valve. complete in all respect as per best satisfaction of Engineer-In-Charge

Providing, fixing, testing and commissioning of made of 250 mm dia, 8 mm thick MS sheet,1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve required accessories, pressure guage and painting with synthetic enamel paint of approvel shade as required by the Enginer-In-Charge.

Terrace Pumpset in back pull out design (end suction type ) having 100 mm suction, 100 mm delivery,CI casing , CI impeller and CS shaft with gland packing arrangement coupled on common baseplate tp kirloskar/ABB/CEL or equivalent (at our option ) make 9.3KW/12.5HP, 2900RPM TEFC sq.cage induction motor suitable for 3 phase,415V,50Hz AC supply confirmimg to through suitable flexible coupling ,Total Head 35m, 900 LPM, including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-In- Charge.

SITC of Cubical type panel fabricated from 2mm thick CRCA sheet wall mountedtype made 1.8SWG IP 42 compartmentalised with hinged locable doors, dust and vermin proof.powder coated of approved shade after 7 tank treatment process,cable alley,inter connection,Incomer 63 amp . TP MCCB with voltmeter.Ampere Meter inbuilt 72 mm meter, Outgoing 12.5 HP DOL Starter and auto/Manual switch with R/Y/B Three phase indication pump running status indication push buttion, start and stop etc. and internal wiring,earth terminal numbering,suitable 4 wire 415V ac 50 Hz 12.5HP 9.3 KW Dol Starter control wire FR copper conductor etc complete in all respect and as per best satisfaction of Engineer-In-Charge.

Supplying and fixing true power make advanced earthing system having copper pipe 3 meter long 50 mm dia with terminal size 50x6 mm ,internal strip size 25x3 with 25 Kg compound including excavation of pit and refilling the same and making earthing pit cover 13 inch dia as required complete in all respect. make :-True power /Earth plus/Ashloka as per best satisfaction of Engineer-In -Charge.

Providing and fixing 4mm dia copper wire on surface or in recess for loop earthing along with existing surface/recess for loop earthing along with existing surface/recess connections etc. as required.

Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 Mtr. long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket as per best satisfaction of Engineer-In-Charge (ISI MARK) Make:Minimax/ /Atasee/Ceasfire.

4 Kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make:Minimax/ /Atasee/Ceasfire.

Providing and fixing Water CO2 9 .Ltrs. type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK) .Make:Minimax/ /Atasee/Ceasfire.

Supplying and Laying of 4 core 10 sq mm copper conductor multi stranded, PVC insulated with PVC Sheathed FRLS flexible cable as required.Make :- L&T/ Polycab/Finolex/ as approved by Engineer-In-Charge (Note:- The contractor shall warranty for one year, the complete system to provide the specified flow and pressure under all condition at outlet. All the equipment shall be guranteed for a period of one year from the date of acceptance and taking over of the installation by the department, against unsatisafactory performs and /or break down due to defective design,material ,manufacture, workmanship or installation. The equipment and components,or any part thereof , so found defective during gurantee period shall be forthwith repaired or replaced within 24 hour to the satisafaction of the Engineer-In-Charge.The equipments test certificate should be provide before installation.

Please Enable Macros to View BoQ information