AGE I CGN 04 23 24 REPAIR REPLACEMENT TO INTERNAL ELECTRIC SUPPLY INCL ACCESSORIES LED LIGHTS ETC UNDER AGE I CG NOIDA

Amount

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete and all as directed by EIC

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC casing & caping with necessary accessories with Flush mounting boxes (Module upto 18 Module from Model No.6890 07 to 6890 12 of legrand ) & white plates with frame (Suitable Module upto 18 Module from Model No.6732 11 to 6732 58 of Make Legrand ) housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly for the following :- (Note :- The cost of Mudular mounting boxes and modular plates included in the quatated rates) Make : (i) Flush mounting boxes Cat Part Module 18 from model No 6890-07 to 6890-12 of legrand or equivalent in havells, SIEMENS. (ii) White Plates : upto 18 module from No Mylanic series model No 6755 61 to 6755 78 of Legrand or equivalent in Havells / Siemens / Crabtree

One light point or fan point controlled by one, one way switch single pole.

One bell point controlled by one bell push on independent board.

One 3 pin 5 Amps socket outlet on independent board

One 3 pin 5 Amps socket outlet on Sameboard

One light point controlled by two 2-way switch.

All as per item No 2 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

Material and labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 voltsgrade confirming to IS-694 drawn through and including non metallic rigid PVC heavy duty concled conduit minium 20 mm dia,but shall be increased as per actual site requirement in accordance with clause No.19.125 of SSR Part-I ,with necessary accessories with Flush mounting boxes & white plates with frames housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge for;- (Note :- The cost of Mudular mounting boxes and modular plates included in the quatated rates) Make : (i) Flush mounting boxes Cat Part Module 18 from model No 6890-07 to 6890-12 of legrand or equivalent in havells, SIEMENS. (ii) White Plates : upto 18 module from No Mylanic series model No 6755 61 to 6755 78 of Legrand or equivalent in Havells / Siemens / Crabtree

One light point or one fan point controlled by one switch

One bell point controlled by one bell push on independent board.

One 3 pin 5 Amps socket outlet on independent board

One 3 pin 5 Amps socket outlet on Sameboard

One light point controlled by one, two way switch single pole.

All as per item No 2 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket outlet on independent board.

S&F 6 A one-way SP switch - 1 module of Make Legard Cat No: 6755 01 or equivalent in Simens / Carbtree all as specified and directed.

S&F 6 A two-way SP switch - 1 module of Make Legard Cat No: 6755 02 or equivalent in Simens / Carbtree all as specified and directed.

S&F 16 A one-way SP switch - 1 module of Make Legard Cat No: 6755 11 or equivalent in Simens / Carbtree all as specified and directed.

S&F 6 A 3 pin universal socket 2 modules of Make Legard Cat No: 6734 52 or equivalent in Simens / Carbtree all as specified and directed.

S & F 6/16 A socket 2/3 Pin combined 2 modules of Make Legard Cat No: 6734 55 or equivalent in Simens / Carbtree all as specified and directed.

S & F 6 A one-way SP bell push - 1 module SP switch - 1 module of Make Legard Cat No: 6755 04 or equvalent in Simens /Carbtree all as specified and directed.

S & F Fan regulator 100 W with 360° rotation 2 module of Make Legard Cat No: 6759 64 or equvalent in Simens /Carbtree all as specified and directed.

S&F bell, AC, 230 Volts, single pole all as specified and directed.Make: Anchor/Havells/Standard

S&F ceiling rose surface bakelite three terminal all as specified and directed. Make : Anchor/Havells/Standard

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 10 or equivalent in Simens/ Hager/ L & T

S & F in replacement double door Sheet metal enclosures factory made DBs 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L & T

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way , 415 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent in Simens/ Hager/ L & T

S & F MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of the isolator should be the same as that of DB) for the following :-

MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4085-87 to 90,92,93,94,95 or equivalent in Simens/ Hager/ L & T

MCB Single pole + Neutral 240 volts, 32 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-17 to 20 or equivalent in Simens/ Hager/ L & T

MCB Triple pole + Neutral 415 Volts ,40 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-81 to 83 or equivalent in Simens/ Hager/ L & T

Supply and fix LED batten luminaire surface mounted ,4 feet system wattage of not less than 18 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 4000 to 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker free (Ripple less than 5%) and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings complete all as specified and directed.

M&L in replacement for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through PVC Casing Caping /conduit and 4 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note : Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

M&L in replacement for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core, copper conductor drawn through PVC Casing Caping /conduit and 6 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note : Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Supply and fixing in replacement of Sub main wiring with four runs of single core 10 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 Volts grade,FRLS drawn through existing PVC conduit/recessed steel on wall /surface with adequate size with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 10 Sqmm as earth wire (green in colour) run through concealed cunduct and connected to common earth dolly with necessary thimbels and lugs as required at site (Note : Four runs of conductor with one run of earth wire and PVC casing capping/conduit will be measured & paid as one unit)

Supply and fix in replacement industrial type switch socket for Geysers with 20 Amps MCB Make:- Iengard Cat No.6078 41 20 A SP complete or Eq in L & T /Hager

M & L for Earthing complete with galvanized steel earth plate electrode 60x60cm x 6.0 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including galvanised earth lead wire 4.0 mm dia,by means of nuts,bolts,checknuts and washers of galvanized iron including 15 mm bore GI pipe,medium grade up to 7.5 meters long all as shown in electrical plate No.3 of MES SSR part-I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber,precast RCC slab 50mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM,( weight not less than 4 Kg/Sqm), with cast iron frame, funnel with wire mesh,GI watering pipi 20 mm dia medium grade,test point and lugs complete. NOTE:-(i) Items includes the cost of 7.5 metre length GI pipe and earth lead for protection of earth lead.Any variation in length shall be adjusted through deviation order.(ii) On testing,if the earth resistance is not obtained,earthing will be regenerated at no extra cost till the desired earth resistance is obtained.

Taking down Split AC of any capacity from existing position along with pvc cables,copper piping,insulation materials, out door units and refixing and connecting the same in after servicing,gas top up, drilling on brick wall,including necessary AC outdoor fixing stand from OEM with nuts and bolts complete as required and as directed by Engr-in-charge

Taking down old Wall fan, sealing cable end, dismantling blades and and removing and refixing the same after cleaning ,greasing etc all as directed by Engr-in-Charge

Supply and fix in replacement solid state electronic type aviation obstruction light fitting 300 LED with cast aluminium poly carbonate red colour, with connecting &testing complete on top of the Bldgs of any height all as directed

S & F in replacement 3 Phase with LED Indicator Ammeter-Schneider DM3110 or equivlent make in existing system complete all as specified and directed

S & F in replacement extended rotary handle, Compact NSX 100/160/250, PowerPact Multistandard H/J, EasyPact CVS 100/160/250, black standard handle, IP55,of makeSCHNEIDER ELECTRIC Cat No LV429338 or eq in ABB/L& T /Hager complete all as directed

S & F in replacement LED Indicator Lamp in existing electric distribution system in RYBG colour as per Existing complete all as directed Make :-Schneider Electric or equivalent

GLIBS CONSTRUCTION

KKP Enterprises

MK Enterprises

M/S R.S. Builders