SPL REPAIR TO DARBAR HALL AND GYM HALL OF BLDG NO E-11 OF 408 REGT AT OD COMPLEX UNDER GE (EAST) MATHURA

Taking down Chowkhats or frames not exc. 1.5 sq m each with shutters (without taking off shutters from the frames), complete all as specified & directed.

Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified & directed.

S&F powder coated (minimum thickness and powder coating 50 micron) aluminium frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for shutter of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws complete all as specified and as directed.

S&F aluminium decogrill of approved design made out mesh size not exc 50mmx50mm fixed to the window frame with CP brass /stainless steel screws including cutting and fixed with f channel/u channel all as specified and directed

S & F double action floor spring hydraulically regulated made of aluminium 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty.including fixing of broken tile.

S & F aluminium extruded section door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

M&L for roof trusses (Framed) tubular truss, crane gantries, rails and fastenings and heavy brackets framing (Hollow tubular section, beam, tee, angle, channel or flat section) FE-290 Gd-165 including distance pieces, cleats etc complete all as specified and directed

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified & directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing fixed to aluminium/ Steel/ wooden frame with rubber beading/ putty/ wooden beading as required area exc 0.5 sq. m in each pane complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish out side of MoD land, complete all as specified & directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes.

M&L for light coloured Vitrified Ceramic tiles 9-10 mm thick area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete, all as specified and as directed.

S&F in repair for providing and laying 10 mm thick pre-finished wooden flooring, dado and skirting consisting of panel size 1200 mm x 200 mm or as per manufacturer specification having class of use, wear resistance with a high pressure surface treated with aluminum oxide adn specially patented surface guard on top of a high density fibre board. The panels having a click system tongue and groove joints to secure a long lasting joint with the edges duly impregnated with parffin. The floating laminate flooring shall be laid over a 0.20 mm thick polythene film to form a vapor barrier and 2-3 mm thick approved foam the panels used shall be of high solidity, high impact strenght , high temp resistance with out change in shape. Each panel shall have click system ad to be laid in approved pattern with suitable guue as per manufacturer specification including alround suitable edge profile alround/ where required for firm end locking all as specified and directed

S&F in repair hollow PVC Wall lining consisting of 10-12 mm thick plain colour PVC sheet inclusive of necessary frame work and solvent cement and fixed with PVC plug and screw and inserted to next panel groove edge and corners of all door window opening etc to be covered with pvc angle fixed at site as per specifications and drawing/ manufacture instruction complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar including removing rubbish out of the MoD land, complete all as specified & directed.

M&L in repair for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc .

M&L for 4-5 cm thick machine cut sand stone slab in sun shades, chajjas, shelves, cills, landings, cover stones, templates, etc., n. exc. 2 m in length, set and pointed in CM 1:4, complete all as directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified & directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete, all as specified & directed.

M&L for brickwork with fly ash, old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or stone masonry surfaces in cement plaster 1:4 mixed including water proofing compound as per manufacturer's instruction, finished even and fair on wall surfaces, complete, all as specified and directed .

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair complete, all as specified and directed

M & L for preparation of surface and applying two coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre & excellent protection against UV, Alkali & Fungal resistance, exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including 2 mm thick wall care putty and priming coat of exterior primer applied at 0.90 litre/10 Sqm over new surfaces upto tripple storey with fully utomatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per min having pressure 3300 PSI. Allow 6-8 hours to dry the surface of both coat of paint to achieve excellent application with 5 years perfomance warranty from manufacturers and instruction complete using limited man power including scaffolding, trestles, ladders, cradles and necessary safety measures for upto triple storey buildings, complete all as specified and directed. Make : Asian Paints Apex , Berger, Dulux or equivalent brand) Note : (a) Complete work to be executed by authorised applicator from paint manufacturer. (b) Primer and emulsion application to be carried out through air less spray machine or by roller (only mechanical application allowed except in paint application on bands/chajja & building edges/ borders/projections where contrasting colour as specified and directed is to be applied)

M & L for applying two coat of Oil bound distemper over a coat of primer & over a coat of 2 mm thick wall care putty on newly plastered surface using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr.The machine should should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shold be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M & L for complete removal of existing surface and applying two coat of Oil bound distemper over a coat of primer & over a coat of 2 mm thick wall care putty on old plastered surface using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr.The machine should should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shold be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified & directed.

M&L for applying two coat of synthetic enamel paint on old painted steel surfaces of any description not other wise describe in camouflage pattern as directed , over 10cm width or girth complete all as specified & directed.

Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets

M&L for 4 mm thick prepainted and designer type E-board in false ceiling (flat or sloping) fixed to and including powder coated MS snap grid frame size of grid 605 x 605 mm, 4 mm GI wire for hanging and including 10 mm wide disginer POP strip all round at the junction of wall and false ceiling complete all as specified and as directed by Engg.-in-charge.

S&F in repair curtain rod stainless steel chromium plated 22-25 mm dia with bracket knobs including decorative finials all as approved complete all as specified and directed.

Taking down rainwater/sewage pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified & directed.

Supplying and laying of 150 mm dia PVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified.

S&F 150 mm bore PVC bends any radius /branch piece/ tee all as directed

Dismentling timber scantlings 40 sq cm and over in section, in any position

Dismantling asbestos cement (corrugated, semi-corrugated, etc., ) sheets in roof covering complete all as specified and directed by Engineer-in-Charge.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified and directed.

M&L for 1.00 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as directed

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, complete, all as specified and directed by Engr-In-Charge.

M&L non skid parking tiles coloured tiles 9-10mm thick (square/rectangular) area of each exc 0.11 Sqm but n. exc. 0.18 Sqm as in floors set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles laid over and including 15 mm thick creed bed in cement mortar 1:4 complete all as specified and as directed.