Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹41.3 L+₹2.3 L (5.95%)Rejected-Finance 5 L LEHAL COLONY PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L2 | Rejected-Finance Not being lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
8 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
PROVN OF TREATED DISTRIBUTION NETWORK AND CERTAIN REV AND MINOR WORKS AT MIL STN JAISALMER
2022_MES_556835_1
8231/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹96,000
Yes
27 Feb 2023
10 Oct 2022
10 Nov 2022
10 Oct 2022
8 Nov 2022
25 Oct 2022
Amount
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified & directed by Engineer-in-Charge
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge.
Removing excavated material soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-charge.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by the Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by the Engineer-in-charge.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified and directed by the Engineer-in-charge.
M&L for rendering 15 mm thick in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.
M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on wall all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing path & finishing the surface even & fair without using extra cement complete all as specified and directed by the Engineer-in-charge.
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors & finishing the surface even & fair without using extra cement all as specified & directed by Engineer-in-charge.
M&L for non skid ceramic coloured jointless tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
S&F glazed ceramic coloured jointless tiles dark shade of size 450mmx300mmx7mm/ 350mmx300mmx 7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.
M&L for rendering 10 mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and fair complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified & directed by Engineer-in-charge.
S&F Aluminium anodised frame for doors, windows, ventilators and partition in room with one or more rebates including joining cleat for fixing etc complete all as specified and directed by the Engineer-in-Charge.
S&F Anodised aluminium door shutters, aluminium section wt 0.55 kg/m including necessary jointing cleats, glazing clips rubber neoprane packing ,handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified and directed by the Engineer-in-Charge.
S&F 4.80mm thick, sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.
S&F in repair, floor spring double action hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MS heavy duty complete all as specified & directed by Engineer-in-charge.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section all as specified & directed by Engineer-in-charge.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified & directed by Engineer-in-charge.
S&F 5 cm thick sand stone slabs Jaisalmer pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.
M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25 to 35cm wide, hoisted and set, jointed and grouted in cement mortar (1:3) complete all as specified & directed by Engineer-in-charge.
M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in Padding complete all as specified & directed by Engineer-in-charge.
HIGH BUILD ELASTOMERIC LIQUID MAMBRANE (PU BASED): M & L For applying of polyurethane based tar extended seamless elastomeric protective coating system, conforming to ASTM C-836-03 and ASTM C 898-09 ideally suited for waterproofing of roof, walls and foundation MAKE: CICO CORCHEM 206I or equivalent in FOSROC/STP/SIKA/ BASF, following the single component solvent based polyurethane compound CORCHEM 2P or equivalent in FOSROC /STP/ SIKA/BASF recommended to be used as a primer before application of CORCHEM. Note :- Roof treatment to be carried by an authorise applicator of manufacturer as approved by GE before carriying of the work.
S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long including 12mm thick Gypsum board fixed with screws complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work & ceiling board complete.
Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified & directed by Engineer-in-charge.
S&F and testing of High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/floors of 150 mm bore including all connecting accessories complete all as specified and directed by Engineer-in-charge.
S&F and testing of High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/floors of 100 mm bore including all connecting accessories complete all as specified and directed by Engineer-in-charge.
S&F and testing of High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/floors of 80 mm bore including all connecting accessories complete all as specified and directed by Engineer-in-charge.
S&F and testing of High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/floors of 50 mm bore including all connecting accessories complete all as specified and directed by Engineer-in-charge.
S&F and testing of High density poly ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/floors of 25 mm bore including all connecting accessories complete all as specified and directed by Engineer-in-charge.
S&F gun metal globe or gate valve, with iron wheel head, screwed both ends for 50 mm bore iron pipe all as specified & directed by Engineer-in-charge.
S&F gun metal globe or gate valve, with iron wheel head, screwed both ends for 25 mm bore iron pipe all as specified & directed by Engineer-in-charge.
Supply, installation, connecting and testing 80mm bore sluice valve, cast iron body class-PN-1.6 with flanged ends drilled, ISI marked (IS:14846:2000 having brass spindle with iron wheel at top with nuts, bolts, washers, rubber gasket, etc complete all as specified and directed:- Note:- Rate includes neccesary arrangements and cutting the pipe of required dimension with attachments for fitting the sluice valve.
Supply, installation, connecting and testing 100mm bore sluice valve, cast iron body class-PN-1.6 with flanged ends drilled, ISI marked (IS:14846:2000 having brass spindle with iron wheel at top with nuts, bolts, washers, rubber gasket, etc complete all as specified and directed:- Note:- Rate includes neccesary arrangements and cutting the pipe of required dimension with attachments for fitting the sluice valve.
Supply, installation, connecting and testing 150mm bore sluice valve, cast iron body class-PN-1.6 with flanged ends drilled, ISI marked (IS:14846:2000 having brass spindle with iron wheel at top with nuts, bolts, washers, rubber gasket, etc complete all as specified and directed:- Note:- Rate includes neccesary arrangements and cutting the pipe of required dimension with attachments for fitting the sluice valve.
S & F for 20 mm bore steel water tubing galvanised medium grade laid in trenches/walls/ceilings/floors etc including all fittings complete all as specified & directed by Engineer-in-charge.
Construction of valve chamber of size 100 x 100 x 100 cm (internal dimensions) with the following specifications :-
(i) 15cm thick PCC 1:4:8 type D-2 (using stone aggregate) as in foundation concrete. (ii) PCC solid block masonry 200mm thick using grade C-5 block in CM 1:6 (iii) Rendering 15mm thick in CM 1:4 finished even and fair. (iv) PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping. (v) 3mm thick MS sheet cover alongwith MS angle iron frame 40 x 40x6 mm duly embedded in coping concrete with necessary locking arrangement. (vi) Painting MS sheet cover and frame with two coats of synthetic enamel paint over a coat of red oxide primer. (NOTE : Excavation and earthwork included under respective items of Sch 'A')
Cutting the existing 150mm pipe CI/DI and tee required length in position for insertion of new tees 150x150x150mm complete all as specified and directed by Engineer-in-charge.
Supply and fix impact drive sprinkler 20mm size with nozzle of brass for lawn 360 degree rotating automatic water with stand heavy duty including all accessories complete all as specified and directed by Engineer-in-charge.
Supplying,fixing and testing of pipe fitting for such as bends (any type, radius and angle), tapers any type (straight, bend, increasing/decreasing or double socket etc. Tee pieces, single branch, "Y" junction, double branch, cross (all sockets or socket and spigot), coilars, caps and plugs,for pipe upto 150 mm bore complete all as specified and by Engineer-in-charge.
Material and labour for clamps fabricated out of structural steel such as ISMC, angle iron, flat iron sections including hot galvanised nuts & bolts, washers for fixing of pipe on ground, bending cold or hot, drilling holes for bolts, in any shape or size as specified and including of one under coat and finishing coat with aluminium paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
Cutting the existing PCC/bituminous road of any description to a size not exc. 0.5m wide x 1.0m deep for crossing of pipe including refilling, ramming and making top 100mm thick surface good with plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-charge.
M&L Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 1.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for conduits and IS : 3419 - 1976 for conduit accessories) with terminated to suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- Note : Modular switch and socket shall be measured and paid separately.
(a) One light point controlled by one switch.
(b) One 2/3 Pin socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per item No 48.00 above but with copper conductor cable 4 sq mm for 3 pin socket outlet, 15 Amps including provision of 4 sq mm PVC insulated copper conductor cable as earth continuity condutor on independent board.
S&F modular switch one way 6 A, 1 module complete all as specified and directed by Engineer-in-charge.
S&F modular socket 6A-2/3 pin combined 2 module complete all as specified and directed by Engineer-in-charge.
S&F modular switch socket combined 16 A, 5 pin, 3 module complete all as specified and directed by Engineer-in-charge.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed by Engineer-in-charge.
S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB's single pole and neutral 32 Amps, 240 Volts, 10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB's single pole 20 Amps to 32 Amps, 240 Volts, 10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-charge.
S & F surface and wall mounted LED tube light along with fixture, 4 ft, 22W, extruded aluminium housing provided for efficient heat disspation with polycarbonate, operating voltage 240 V, 50HZ, AC supply and operating tempureture 0 to 50 C, power factor >0.9, lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe complete all as specified and directed by Engineer-in-charge.
M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in concealed conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 4.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engineer-in-charge. (Note :- Two runsof 4.00 Sqmm cable & one run of 4.00 Sqmm cable shall be paid as one unit length)
M&L for submain wiring with 2 Nos 6 Sqmm + 1 Nos 6 sqmm earth continuity wire PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral- Black, Eart - Green) drawing into and including concealed rigid non metallic 20 mm dia PVC conduit, medium grade ISI marked invory colour alongwith accessories of following size PVC concealed conduit complete all as specified and directed by Engineer-in-charge. (Note : Three run of cables including PVC casing caping its accessories and chases and its making good shall be measured and paid as one length)
Supply, fixing, commissioning and testing air cooled split unit air conditioner electric driven, single phase of capacity of 2 TR, BEE 5 star rating copper pipe condensor, remote control, including mounting of inner and outer unit on wall and making hole in wall for refrigerant copper pipes, flexible cable mounting bracket for out door unit complete all as specified and directed by Engineer-in-charge.
Supply & fixing of automatic voltage stabilizer single phase naturally air cooled indoor type & designed for input variation batween 170 V to 270 V complete all as specified and directed by Engineer-in-charge.
Supply & fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified and directed by Engineer-in-charge.
M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron wire 4mm dia as earthing lead up to Panel /DB BOX as per site requirement by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including test point terminal cover the earhing hole by PCC chamber and GI cover and testing on completion complete all as specified and directed.
M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground level connected to galvanized iron strip 32x6mm as earthing lead up to 7.5 mtr by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection connected to electrical equipment and earthing test point , earth dolly and earth chamber as shown in elect plate No 2 of SSR Pt-I including all necessary earth work, excavation, earth chamber with PCC 1:3:6, Type C1 and RCC chamber cover of PCC 1:2:4 with handle and 20 mm dia GI watering pipe with funnel and wire mesh etc and testing on complete all as specified and directed Engineer-in-charge.
NOTE FOR ITEM No. 63.00 & 64.00 [i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.
Material and loabour of aluminium strip 25x 3.15 mm with porcelin insulator saddlles and fixing screws etc,for roof conductors and down conductors above ground complete all as specified and directed by the Engineer-in-charge.
M&L Air termination, single pointed Aluminium rod 12 mm dia 300 mm long with base fixing complete all as specified and directed by the Engineer-in-charge.
M & L Earthing Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex. head screw.Material and labour for testing/termination point made out of 32 x 6 mm copper strip of length 150 mm duly housed in suitable MS box insulators etc for linking the down conductor and the earth terminals of the lightening arrester system complete all as specified and directed by the Engineer-in-charge.
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in pipe or fixed to DBs or any other indicated situation for loop earthing with galvanised iron strip of 32X6 mm size complete all as specified and directed by the Engineer-in-charge.
M&L for GI Tubing light grade 40mm dia.for earthing strip protection complete all as specified and directed by the Engineer-in-charge.
Supply only desert cooler (Steel body) electric driven single phase, having nominal air flow capacity of 6000 CuM per hour aluminium fan blade, copper winding fan motor, submersible pump of make khaitan Zolta (ISI marked) and all body made with minimum 18 gauge GI sheet including primer coat red oxide and synthetic enamel paint with float valve of 15mm dia complete all as specified and directed by the Engineer-in-charge.
M/s Shree Construction Company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .