Construction of Passenger Waiting Shed at Pudukudi in Kottaipattinam Panchayat

Amount

Construction of Passenger Waiting Shed at Pudukudi in Kottaipattinam Panchayat

Earth work exacavation and depositing on bank with initial lead and lift in all clauses of soils such as as per S.S.20B for narrow foundation etc. complete.

Supplying and Filling Gravel including cost and Conveyance of all materials to Site and all labour Charges etc

Supplying and Filling with M.Sand including cost and Conveyance of all materials to Site and all labour Charges etc

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Centering charges for concrete works including cost and conveyance of all materials to site and all labour charges etc., complete.

Supply and fabrication of steel including cost and conveyance of all materials to site and labour charges etc., complete

R.C.C. 1:1.5:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges etc., complete.

Brick work in cm 1:5 mix using country bricks including cost and conveyance of all materials to site including labour charges incidental charges and curing etc., complete

Special Ceiling Plastering with Cement Mortar 1:3 mix 10mm thick including cost and conveyance of all materials and all labour charges etc,. complete.

Plastering with Cement Mortar 1:5 mix 12mm thick including cost and conveyance of all materials and all labour charges etc,. complete.

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and finshed with one course of pressed tiles of size 20x20x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone M.Sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Emulsion Painting two coats inluding cost and conveyance of all materials to site and all labour charges

Wiring with 2x1.50 Sq.mm (22/0.30) PVC insulated SC unsheated Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150mm x 100mm x 113mm TWswitch with 3mm thick Hylum Sheet cover PVC Light Point / Fan Point

Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheated copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains SD 62

Supply and Fixing of CFL Bulb etc

Earthwork excavation and depositing on bank with initial lead and lift in all clauses of soil except hard rock as per SS 20B.

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site etc complete.

Supplying and errecting centering charges for sides and soffits of all R.c.c works including all labour charges etc complete

Cement Concrete 1:3:6 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Providing and Laying of Interlocking Concrete Block (Surface Textured) Pavements having thickness 60mm and compacted over a thin bedding sand layer of 30 mm thickness and joints shall be filled by fine sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504.

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Tiruppathi (BID ID -1217204)