Geometry & Meshing The item includes an industry proven software which can model various type of high frequency, semiconductor and optics applications. The software licenses should be perpetual. Software at a minimum should include basic Geometry creation, High frequency models with a user defined physical problem with a given system of PDEs (Partial deferential equation) in a software environment. The software should couple two or multi physical problem in the supplied software engine. Software should have an interface for building geometry of the basic system for the solution of the problem as detailed in the scope of work. The Software should able to generate mesh in the developed model including but not limited to 2D and 3D Meshes with specific mesh refinements at the area of Interest. Software should be able to generate both structured, unstructured and hybrid meshes. User should be able to apply point, line, surface, or volumetric types of boundary conditions in the generated meshes. Software should allow users to model electromagnetic wave propagation with a ray tracing approach. The propagating waves are treated as rays that can be reflected, refracted, or absorbed at boundaries in the model geometry. Wave propagation in linear and nonlinear optical media for accurate component simulation and optical design optimization should be done in the software. Software should include the simulation capability of a wide range of practical devices including bipolar, metal semiconductor field-effect transistors (MESFETs), metal-oxidesemiconductor field-effect transistors (MOSFETs), Schottky diodes, thyristors, and P-N junctions. Software should include the simulation capability of Antenna, Antenna arrays, Transmission lines, and microwave heating application. | Prem Singh Rawat 110078,Deen Dayal Upadhyaya College Universityof Delhi Sector-3,Dwarka, New Delhi- 110078 |