PROVISION OF ROAD FURNITURE AND RCC SLABS TO DRAIN AT H1 PLOT UNDER ICGAS RATNAGIRI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft / disintegrated rock complete all as specified and as directed.

Excavating in post holes in soft / disintegrated rock (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones, etc. not exceeding 10 sqm on plan and not exceeding 1.5 metre in depth and getting out in soft / disintegrated rock complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate Cement concrete as in foundations, filling, concrete padding and mass-concrete complete all as specified and as directed.

Material and labour for machine cut laterite stone masonry wall exceeding 10cm in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

Material & Labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material & Labour for providing edge moulding to 18-20mm thick Granite stone of any description, counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

Material & Labour for SS round pipes of grade 304 of dia up to 150mm for road furniture such as traffic sign, signage board etc. including cutting to size, erecting in position, welding and brazing including fixing/clamping ACP sheets on SS frames with necessary screws, nuts etc. complete all as specified and as directed.

Supply & Fixing of Aluminium composite panel (ACP) AL 33D having 3 to 4mm thick sheet panel with 0.3mm aluminium coil thickness aluminium alloy AA3105 of approved texture (veneered pattern) and colour as approved by Engineer-in-charge for Interior/exterior applications such es wall claddings, partitions, sign board fixed on MS/GI /Aluminium framework by riveting/screwing or with bolts and nuts at 300mm centre to centre including filling the joints of each panel with silicone gel to match the colour of ACP panels for superior finish all along the periphery complete all as specified and as directed. (Note: The rate quoted includes fabrication of MS/GI/Aluminium frame work and fixing of ACP panels)

Material & Labour for printing with 3M radium reflective film and UV eco print by pressure sensitive Sqm adhesive backing on aluminium composite panel as in sign board for printing designs images, logos, fonts etc. as approved by Engineer-in-charge complete all as specified and as directed.

Supply & Fixing of Polycarbonate outdoor convex mirror with ABS body of size 1000mm dia, 130 degree and above viewing angle for blind spots, scratch resistance and suitable for external use under all weather conditions, un-affected by radiations etc Convex mirror to use at blind curves, parking lots and roads to give visibility of the approaching vehicle from the other side including top mounted lid, zinc plated fittings and mirror body clamps suitable to mount on both pole and walls complete all as specified and as directed.

Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti-theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3-watt one Ni-cd rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions complete.

Material & Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

Supply & Fixing of SS 304 grade swing type pole mounted twin dustbin/receptacles i.e. double pole and double trash receptacles with closed rotating lids to avoid intrusion of rain water, having full body with minimum sheet thickness of 1mm and above, weight 15kg and above for set of 02 receptacles, 80 to 100 litre capacity for each trash bin, design/model as approved by Engineer in charge complete all as specified and as directed

Material & Labour for providing, precast cement concrete Type B1 1:2:4 (20 mm graded aggregate in landings, cover slabs (for manholes drain etc.) challah hoods and similar articles with plain fair faces, including chamfers weathering, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed. Note: (1) The rate includes for the use of forms, moulds or machine moulds and setting the slabs, etc. complete including raking back the joints of the internal faces (at least 10 mm) for pointing as the work proceeds or finishing with neat flush joints. (ii) Precast cement concrete item shall be reinforced as directed by Engineer in Charge and reinforcement shall be measured separately.

Supply & Fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Supply & Fixing of Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material & Labour for Rendering 15mm thick in CM 1:4 with Polymer modified ready mix plaster of approved makes on fair faces of brick work, concrete surfaces or any other surfaces of stone masonry etc. finished even and smooth complete all as specified and as directed

Removing excavated material exceeding 250 m but not exceeding 500 m and depositing where directed where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and as directed.

Advait Enterprises (BID ID -3282729)

Ideal Infrastructure and Consultants (BID ID -3281806)

M/s. P S REDDY (BID ID -3283108)

K M SUBHANAIAH (BID ID -3285579)