Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC 240 1 A RAI COLONY CIVIL LINES JHANSI 284001 | JHANSI | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹37.3 L+₹86,147 (2.37%)Rejected-Finance | L2 | Rejected-Finance Not being a
lowest
tenderer | |
| 3 | L3₹40.8 L+₹4.4 L (12.1%)Rejected-Finance | L3 | Rejected-Finance Not being a
lowest
tenderer | |
| 4 | L4₹41.1 L+₹4.8 L (13.1%)Rejected-Finance VILLAGE TAPARIYAN BABINA CANTT BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L4 | Rejected-Finance Not being a
lowest
tenderer |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
15 Feb 2022, 6:00 pmClosed
GE BABINA
GE BABINA CANTT 284401
COMPREHENSIVE REPAIR/ MAINT TO WATER SUPPLY INSTALLATIONS AND PIPE LINE NETWORK AND CONNECTED WORKS AT SWIMMING POOLS, KLP, SAF, FASF AND ADJOINING AREA AT BABINA CANTT
2022_MES_502455_1
GE/BAB/TOKEN/59 OF 2021-2022
Open Tender
Civil Works - Water Works
Item Rate
330 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹70,000
Yes
20 Apr 2022
19 Jan 2022
17 Feb 2022
19 Jan 2022
15 Feb 2022
3 Feb 2022
Amount
Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out in any type of soils etc complete all as specified and directed
Returning, filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 Cm each in soil.
Removal of surplus soils to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point.
M & L for road cutting to a depth up to 1.5 mtr below the normal ground level and in width equal to external dia plus 300 mm for lay pipe line upto 300 mm dia across the road in horizontal position and making good the cut portion filled with PCC 1:3:6 type C-2 using 40 mm graded stone aggregates 450 mm thick from TOP over 300 mm thick hard core and rest with filled earth , to levelled with existing surfaces for smooth plying of vehicles etc complete all as specified and directed. Note : Cost of PCC ,hard core and Earth shall deemed to be included in unit rate quoted by the tendered.
M&L for 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foot path laid in alternate panel not exceeding 12 Sqm each ,panel made with 10 mm thick plywood and joint filled with sealing compound grade 'A' etc complete all as specified and directed . Note : Cost of materials for forming panel and filling of joints shall deemed to be included in unit rate quoted by the tenderer.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above ground level including removal of debris complete all as specified and directed
M&L for taking up or down steel water tubing and connections of 15 mm dia including cleaning for refixing complete all as specified and directed.
Description all as per item No 07 here in before but of size 20 mm bore
Description all as per item No 07 here in before but of size 25 mm bore
Description all as per item No 07 here in before but of size 40 mm bore
Description all as per per item No 07 here in before but of size 50 mm bore
Description all as per per item No 07 here in before but of size 80 mm bore
Description all as per per item No 07 here in before but of size 100 mm bore
Re-laying / re-fixing galvanised steel water tubing of 15 mm bore with and including providing new fittings , ISI Marked, laid in trenches, under floor or fixed to walls / ceilings complete all as specified and as directed.
Description all as per item No 14 here in before but of size 20 mm bore
Description all as per item No 14 here in before but of size 25 mm bore
Description all as per item No 14 here in before but of size 40 mm bore
Description all as per item No 14 here in before but of size 50 mm bore
Description all as per item No 14 here in before but of size 80 mm bore
Description all as per item No 14 here in before but of size 100 mm bore
S & F galvanised steel water tubing medium grade 15 mm bore ( ISI Marked ) with all fittings such as bends, elbow, socket etc laid under floors/trenches or on walls with fixing arrangments complete all as specified and directed.Make: Jindal/Swastik /Tata/Zenith /BST
Description as per item No 21 here in before but of size 20 mm bore
Description as per item No 21 here in before but of size 25 mm bore
Description as per item No 21 here in before but of size 40 mm bore
Description as per item No 21 here in before but of size 50 mm bore
Description as per item No 21 here in before but of size 80 mm bore
Description as per item No 21 here in before but of size 100 mm bore
S & F in replacement of brass ball valve size 15 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe incl dismantling old U/S gate valves all as specified and directed . Make : Zoloto/Sant/Leader
Description as per item No 28 here in before but 20 mm bore
Description as per item No 28 here in before but 25 mm bore
S & F in replacement of GM gate valves of size 40 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe incl dismantling old U/S gate valves all as specified and directe. Make : SANT/KIRLOSKAR/RAMCO/LEADER
Description as per item No 31 here in before but 50 mm bore
M&L for boring on existing GI/CI/DI pipe upto 300 mm bore for branch connections of size 25 to 50 mm bore by fixing of MS clamp 100 x 4 mm cut to length and bend to shape, drilled and welded with GI socket of suitable size including rubber packing, nut, bolt etc and testing complete all as specified.
M & L for cutting of CI pipe 80 to 150 mm bore carefully for inserting fittings such as bend, tee, socket pieces, collar etc complete all as specified and as directed.
Disconnecting and taking down old existing cast iron pipe / ductile iron pipe with spigot and socketed end and lead jounts , 100 mm bore incl all fittings including all fittings and connections such as bends, union,elbow socket etc and opening of joints of any type and retreiving lead from joints in any position in trenches/under floors / etc cleaning the pipe thoroughly for re-routing etc complete all as specified and directed. Note : Excavation/Earth work shall be measured and paid seperately under respective item od BOQ
Description as per item No 35 here in before but of size 150 mm bore
Description as per item No 35 here in before but of size 200 mm bore
S & F in replacement ductile iron pipe with socket and spigot ends of 100 mm bore class - K-9 , with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layer , ISI maked IS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for "push on joints" in any lengths and including providing joints (Tyton joints) including taking out from vertical position or from trenches etc complete all as specified. Make : LANCO Industries Ltd AP 517641 FAX-287657/ELECTRO STEEL CASTING LTD WEST BENGAL /TATA METALIKS KOLKATTA / M/S AARKO PIPE GRAM UDYOG JALANDHAR /ELECTROTHERM (INDIA ) LTD KACHCHH GUJRAT Notefor item No 38 to 40 : The cost of joints shall deemed to be included in unit rate quoted by the tenderer. (Excavation and earth work shall be measured and paid seperately .
Description as per item No 38 here in before but 150 mm bore
Description as per item No 38 here in before but 200 mm bore
Relaying/refixing including providing joints and testing of ductile iron pipe of 80 mm bore all as specified and directed . Note for 53 to 58 : Cost of all jointing materials required at site like rubber ring joint included in the quoted rate (ii) earthwork shall be measured and paid separately.
Description as per item No 41 above but 100 mm bore
Description as per item No 41 above but 150 mm bore
S & F in replacement of cast iron sluice valve of 80 mm bore class PN-1.6 ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed. Make: Kirloskar/ VENUS/L&T/SANT/AUDCO/KEJRIWAL /UPADHYA /SANT Note:- Any damage if occurs while replacing the sluice valve to pipe lines, over head reservoir will be responsibilty of contractor and will be repaired by contractor at his own cost. Nothing extra will be admissible on this account.
Description as per item No 44 here in before but 100 mm bore
Description as per item No 44 here in before but 150 mm bore
Description as per item No 44 here in before but 250 mm bore
Description as per item No 44 here in before but 300 mm bore
S & F in replacement of 80 mm bore non return valve both end flanged suitable for cast iron pipe incl all fittings washer, nuts & bolt etc complete all as specified and directed.Make : KIRLOSKAR/ZOLOTO/SANT/LEADER
Description as per item No. 49 here in before but 100 mm bore and ditto
Description as per item No 49 here in before but 150 mm bore and ditto
S & F in replacement of 50 mm bore air release valve double chamber as per IS 14845 including mounting GI pipe and clamps as per requirement at site suitable for cast iron pipe/ ductile iron pipe incl all fittings washer, nuts & bolt etc complete all as specified and directed. Make: Kirloskar/ VENUS/L&T/SANT/AUDCO/KEJRIWAL /UPADHYA /LEADER/NORMAX
Description all as per item No. 52 above but 100 mm bore Air release valve and ditto
S & F in replacement of foot valve 100 mm bore as per IS 4038 including necessary rubber gasket , MS nuts ,bolts, washers etc complete all as specified and directed. Make: Kirloskar/ VENUS/L&T/SANT/AUDCO/KEJRIWAL /UPADHYA /LEADER/NORMAX/VARUN
Description all as per item No. 54 above but 150 mm bore Air release valve and ditto
Supplying ,fixing ,jointing and testing DI fittings as per BSEN:545 IS-9523 such as bend ( of any radius and angle) Tee ,reducer ,collar caps ,plugs ,glands ,tapers and junctions etc of any description with socket/spigot/flanged at ends as per site requirement suitable for 80 to 300 mm bore complete all as specified and directed . Make: LANCO Industries Ltd AP 517641 FAX-287657/ELECTRO STEEL CASTING LTD WEST BENGAL /TATA METALIKS KOLKATTA / M/S AARKO PIPE GRAM UDYOG JALANDHAR /ELECTROTHERM (INDIA ) LTD KACHCHH GUJRAT
M & L for cast iron fittings of any description i.e bends (any type radius and angle ),tappers any type (straight ,bend increasing decreasing or double socket etc ),Tee pieces single branch Y junction ,double branch cross,(all socketed or socket and spigot),connecting pieces (one side flanged other socketed or spigot and bell mouth pieces one end flanged other tapering as bell mouth or both flanged /both socketed end as directed ) including collars ,caps and plugs upto 300 mm bore pipe and including nut bolts ,packing materials etc and making joint leak proof complete all as specified and directed . NOTE:-(i) Excavation & earth work and Joints shall be measured and paid for separately under appropriate item of Sch ’A’ (ii) Weight of fitting shall be actual weight or weight for each fitting given in IS code IS-1538-1976 (Part-I to xxv)
M & L for repairing leakages or blockage of cast iron pipes with spigot and socket ends of 50- 80 mm dia bore by de-watering of leaking pipe lines and trenches, burning out remains of existing lead joints to recover available quantity of lead and making new lead joint with retrieved material by providing additional quantity of lead as required at site incl all other jointing materials and testing complete all as specified and as directed. Notes : 1. Cost of excavation and earth work as required at site to carry out the repair work shall deemed to be included in the unit rate quoted by the tendere . Nothing extra on this account shall be admissible .2. Actual quantity of lead retrieved from leaking joints may vary from joint to joint and the same be considered to the barest minimum owing to loss due to high pressure of water jet and flooding of water from the joints. 3. No claim whatsoever in this regard for loss or non-retrival of jointing materials shall be admissible and rate quoted by the tenderer shall deemed to be inclusive of this aspect. Note for recovery : In case contrcator fails to rectify repair within 24 hrs from the date and time mentioned in register kept with complaint cell duly authenticated by the contractor signature as token of confirmation of receipt of complaint a recovery of Rs 2000 per day shall will be deducted fron contractor's due.
Description as per item No 58 here in before but 100 mm-200 mm bore
Description as per item No 58 here in before but 250-300 mm bore
M&L for Construction of Valve pit of size 1050cm x 1050cm x 900cm (internal dimensions) with Brick masonry construction including all necessary excavation and earth work in hard/ dense soil,returning,filling,in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed , PCC in foundation of the mix (1:4:8) Type D-2 (using 40 mm graded crushed stone aggregate), PCC Pocing in PCC(1:2:4), type B0 using 12.5m crushed graded aggregate, brick masonry work in cement mortar (1:4) rendering,15 mm thick in cement mortar (1:4) internally,finished even and fair and pointing in CM 1:3 flush pointing externally . Mild steel angle iron 50x50x6mm frame work ,MS sheet cover with 3.15mm thick with handle made of flat iron 30x5 mm thick and locking arrangment including providing pad lock ( Godrej/Link/Horisson ) 50 mm size Brass , and applying two coats of synthetic enamel paint of tint as approved over a coat of red oxide primer to all mild steel surfaces and providing two coats of black bituminous paint to all embedded portion of mild steel work etc. complete all as specified and shown on drawing.
Description as per item No 61 here in before but 950 x 950 x 600 mm
Supply and fix water line route indicator of size 400 x 300 x 30 mm made of precast RCC (1:1:1/2 :3) type B-0 using 12.5 mm graded stone aggregate etc complete all as specified and directed. Note :- Route indicator should be written as main water supply line as directed .
S & F in repair of sluice valves 150 mm dia bore of any make installed at water supply rising or distribution lines and incl dismantling and taking up or down of unserviceable Stainless steel spindle and gun metal / bronze check nuts and replacement the same with existing specifications and incl providing rubber packing, nuts, bolts, washers etc and re-assembling in position after repair complete all as specified and directed .
Description all as per Srl item No. 64 here-in-before but 250 mm dia bore
Description all as per Srl item No. 64 here-in-before but 300 mm dia bore
S&F in reapir water level indicator for OHT's at different locations made of level indicaton scale on 2 mm thick MS sheet duly painted with synthetic enamel paint over a coat of red oxide primer and fixing of level indication scale at hight of 3 mtr from ground level. The level indicator must be at height of 3 mtr and 30 mm width made of materail as per existing . Level indicator includes floating ball, guage wire from inside tank to level indicating board. The guage wire must be made with multistranded SWR of thickness 3 mm dia. SWR shall run over pulleys and pulleys fixed on wall where directed .Note: The rate includes for providing and fixing pulley of suitable size /dia .(ii) Mild steel shall be measured and paid seperately.
M&L for GI wire mesh of wire gauge 2 mm dia and apperture not more the 20 mm to vent pipes ,venlators and enterance of HT/UG sumps at various locations by providing alround wooden beeding work of 2nd class hard wood ( seasoned wood ) ( SAL) and including providing MS clamp made of FI 40x 5 mm to pipes for fixing GI wire mesh etc complete and as direcetd.
M & L for taking out unserviceable/burned submerssible motor 3 phase AC 440 Volts capacity 5 to 15 HP for rewinding with superior quality PVC insulated copper winding wires of identical gauge and as specifications of existing short cicuited winding wires with all necessary insulation materials , cleaning of stator,& slots and applying one coat of water proof epoxy paint to the exterior surfcaes of motor and tesing on load etc complete all as specified. Notes (i) : Contractor or his rep has to attend the insttalation on the same day of intimation and pump motor shall be got repaired with 3 days from the date and time mentioned in register /Gate pass kept with incharge duly authenticated by the contractor signature as token of confirmation of receipt of complaint . (ii) In case contrcator fails to rectify repair within 3 days a recovery of Rs 2000 per day shall will be deducted fron contractor's due.
M & L for opening up unserviceable/burned electric induction motor of water pump set of capacity 15- 40 HP 3 phase AC 440 Volts, cutting and removing the short circuited stator winding coils complete and re-winding the same with super enamelled copper conductor wires of appropriate size as per the existing gauge including cleaning of slots, all necessary insulating materials, varnishing, drying and testing on load complete all as specified. Notes (i) : Contractor or his rep has to attend the insttalation on the same day of intimation and pump motor shall be got repaired with 3 days from the date and time mentioned in register /Gate pass kept with incharge duly authenticated by the contractor signature as token of confirmation of receipt of complaint . (ii) In case contrcator fails to rectify repair within 3 days a recovery of Rs 2000 per day shall will be deducted fron contractor's due.
S&F LED security/ street light fitting 1 X 45 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium roadway luminaire with high power LEDs as light source and electronic driver suitable for pole dia 32 mm including 32mm dia light grade tube bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed. Make: – Shakti cat part No. SZPSLMM045 or equivalent specifications in Philips / Crompton / WIPRO
Supply & fixing change over switch with advanced neutral ON LOAD 100 Amp 4 Pole AC 415 Volt manual change over over in sheet steel enclosure including operation handle confirming to IS : 13947 ( Part-3) etc complete all as spcified and directed.Make: L&T cat part No. CO11000OSOO or equivalent specifications in Havells/HPL/Indo Asian
Supply and laying XLPE insulated, armoured heavy duty electric under ground cable size 10 sqmm 4 core, insulated aluminum conductor 1100 volt grade laid in trenches / floors/ ducts/ or fixed on poles or through sleeves etc.including connection & testing complete all as specified and directed. Make of conductor for all similar items of BOQ : Plaza/Paragon/Grandlay/HPL/RR Kabel/KEI/Finolex/Asian Cable Co /Universal/RPG Cables
Supply and laying XLPE insulated, armoured heavy duty electric under ground cable size 35 sqmm 3.5 core, insulated aluminum conductor 1100 volt grade laid in trenches / floors/ ducts/ or fixed on poles or through sleeves etc.including connection & testing complete all as specified and directed.Make of conductor for all similar items of BOQ : Plaza/Paragon/Grandlay/HPL/RR Kabel/KEI/Finolex/Asian Cable Co /Universal/RPG Cables
S&F of GI bracket fabricated with GI tubing not less than 40 mm dia medium grade 1.2 mtr long bend shape at 120 degree by cutting ,welding and well finising incl MS clamp of FI 25x5 mm thick of suitable length and fixed with suitable means etc complete as directed. Make: Jindal/Swastik /Tata/Zenith /BST
Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable incl spreading, levelling and consiolidation complete all as specified and directed.
Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed. Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S SAP PAVERS JODHPUR (C) SAGAR TILES Saharanpur ( D) SUPREME TILES (E) NITCO (F) NAVYA TILES JODHPUR
S & F in replacement of digital soft starter suitable for 30 to 60 HP motor, 3 phase 415 volt with comprehensive motor protection, programmable over load protection, built-in RTD & Thermistor inputs with constant current adaptive accelaration & de-accelaration for smooth start and stop operation of motor incl dismantling of u/s starter & installation / programming by skilled technician of original manufacturer, incl necessary mounting arrangement on existing panel such as fastener nuts & bolts and also fixing HRC fuse of suitable capacity onpanels with copper busbars etc as required complete all as specified and directed. Make:- L&T Cat No EMX3-105 or equivalent in Havells/HPL/C&S/ Schnieder
S & F in replacement of digital soft starter suitable for 100 HP motor, 3 phase 415 volt with comprehensive motor protection, programmable over load protection, built-in RTD & Thermistor inputs with constant current adaptive accelaration & de-accelaration for smooth start and stop operation of motor incl dismantling of u/s starter & installation / programming by skilled technician of original manufacturer, incl necessary mounting arrangement on existing panel such as fastener nuts & bolts and also fixing HRC fuse of suitable capacity onpanels with copper busbars etc as required complete all as specified and directed. Make:- L&T Cat No EMX3-0220B -411 or equivalent in Havells/HPL/C&S /Schnieder
M/S S K AGARWAL
m/s gupta trading
M/S Kharya Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .