REPAIR /REPLACEMENT OF JOINERY, PLUMBING FLOORING , SAINTARY FITTINGS , STAIR CASE AND OTHER MISC B/R MAINTENACE WORK AND REPAIR TO SEWAGE SYSTEM INCLUDING CLEANING OF SEPTIC TANK, SOAKAGE WELL, MANHOLE AT CHADHAN UNDER GE AF JAISALMER

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Taking down & Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening complete all as specified and directed.

Powder coated Anodised aluminium frame and shutter for doors,windows, ventilators with one or more rebates including joining cleat for fixing, including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door (150mm) , 3 nos hinges for each door( 100mm) ,02 Nos tower bolt 200mm for each door anodised aluminum snap beading screws etc. complete all as specified and directed.

Anodised aluminium expanded metal mesh of any size/shape for window /ventilator fixed in Aluminium frame with aluminium snap beading, screws etc. all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperrture 1.40mm and fixed with tinned tackles or stainless steel wire staples fixed complete all as specified and directed.

ACP colour sheet 4 mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to any frame work complete all as specified and directed.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165 (Fe-290), drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooken and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing in position complete all as specified and directed. Note : Cost of welding butt hinges to the door frame deemed to included in quoted rate .

30 mm thick Flush shutters factory made solid core construction, with block board core, and ply wood face panels, commercial type on both side (ISI marked) fixed to chowkhat complete all as specified and directed.

Factory made Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I complete all as specified and directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19mmx19mmx19 gauge and PDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitable screwed complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Stainless steel wire cloth, 0.71 mm nominal dia of wire fixed with tinned tacks, of 20mm mesh of stainless steel wire staples complete all as specified and directed

Stainless steel wire cloth, 0.71 mm nominal dia of wire fixed with tinned tacks, of 20mm mesh of stainless steel wire staples fixed as in repair complete all as specified and directed

150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

100 mm long stainless steel hinges type B-12 complete all as specified and directed.

Aluminium handle 150mm long , fabricated type anodized complete all as specified and directed.

PVC door( back side) stopper 75mm long fixed as in repair complete all as specified and directed.

Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Precast cement concrete (1:3:6), type C-1 (using 20 mm graded stone aggregate) solid block masonary exc 10cm in width and set in cement and sand mortar (1:4), and including demolition of existing masonary of any type complete all as specified and directed.

15mm thick plaster in cement mortar (1:4) on external wall surface finished even & fair without using extra cement including taking down old plaster complete all as specified and directed.

15mm thick plaster in cement mortar (1:6) on internal wall surfaces finished even & smooth, without using extra cement including taking down old plaster complete all as specified and directed.

Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of smoth finishing of wall care putty ON NEW PLASTERED SURFACE complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of wall surfaces and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered or unplastered surfaces of ceiling surfaces and applying three coats of white wash on ceiling, soffit of chajjas /drop and roof projection facia complete all as specified and directed.

Glazed colouredceramic tiles in dado/skirting 300x450x6-7mm / 350mm x250mm x6-7mm thick on vertical surfaces, dado and skirting over and including 15mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling of existing tiling with cement mortar bedding complete all as specified and directed

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling with cement mortar bedding complete all as specified and directed

Non skid joint free glazed ceramic tile coloured tiles (1st quality/ premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.36Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) including dismantling floor, hearth or wall tiling with cement mortar beddingcomplete all as specified and directed.

75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in path/plinth protection laying in alternate ways finished even and fair without using extra cement complete all as specified and as directed .

15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed as in repair complete all as specified and directed.

10 Litres capacity PVC valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe and fixed as in repair complete all as specified and directed.

15mm bore brass chromium plated angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.

15mm bore stop valve fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

15mm bore, brass chromium plated pillar cock (foam flow) two ways screwed down for pipe fixed as in repair complete all as specified and directed.

15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union fixed as in repair complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern with flat bottomand cover and mild steel chromium plated or aluminised hinging device fixed as in repair complete all as specified and as directed.

Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with longh with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm with including dismantling and taking down old unserviceable complete all as specified and directed.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing , complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs and including dismantling old unserviceable complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and fixed as in repair complete all as specified and directed.

Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin fixed as in repair complete all as specified and directed.

32/40mm bore spring type PVC waste pipe min 1.0 mtr long fixed to WHB & sink etc fixed as in repair complete all as specified and directed.

Tubular towel rail, stainless steel, 20mm dia, 60cm long fixed with & incl chromiumplated brass screws and wooden / plastic cleat fixed as in repair complete all as specified and directed.

125mm dia brass chromium plated shower rose with CP arms swivel joint, , including fixing to steel pipe or union fixed as in repair complete all as specified and directed.

150 mm square PTMT grating with openable flap (Min weight 100 gms).fixed in repair complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed as in repair complete all as specified and directed.

Hasp and staple 125 mm size, ISI marked , safety type of aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed

Mild steel flat as in hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

150mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door, fixed as in repair complete all as specified and directed.

Mild steel helical door spring including roller and roller plate fixed as in repair complete all as specified and as directed .

Mild steel PVC coated stainless steel rods, 25mm internal diametre including decoratine type brackets and stainless steel curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc fixed as in repair complete all as specified and directed.

3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 sqm in each pane and fixing new panes including hacking out old broken glasses any thickness size complete all as specified and directed.

3mm thick figured glass ordinary quality and glazing with oil putty not exceeding 0.50 sqm in each pane and fixing new panes ncluding hacking out old broken glasses any thickness complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick laid as in floors in squares or rectangular pattern laid over 20mm thick cement screed bed in cement and mortar (1:6) set and jointed in neat cement slurry and pointed coloured cement to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Machine cut Kota stone slab 12- 15mm thick, as in skirting, riser of step, dado and pillar etc. laid over and including rendering of 15mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

Hybrid Board, Eco Board classic 4mm thickness, 595mmX595mm, as in false ceiling including powder coated GI grid system and ajustable suspender and fastening arrangement including dismantling of esisting ceiling complete all as specified and directed.

PVC wall panelling lining consisting of 5 mm thick prelaminated PVC sheet including 5 mm thick PVC sheet fillet of width 35 mm for wall panelling with solvent cement and screw fixing on PVC frame etc including taking down/dismentling of panelling complete all as specified and directed as directed.

Rotational moulded polyethylene water storage tanks 500 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed.

20mm dia ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed.

20mm dia ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe (minimum weight 210 gms) fixed as in repair complete all as specified and as directed.

Cleaning up to 1000 ltr capacity existing tanks, setting aside (or lowering if required) fand removing all scale and dirtfrom tank & mouths of circulating pipes , etc. and hoisting if required reconnecting and re-fixing in same position complete all as specified and directed.

Plastic water closet seat cover (white colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.

Chromium plated Jet spray for pedestal pattern water closet fixed as in repair complete all as specified and directed.

Stainless steel ,chromium plated soap dish holder fixed as in repair complete all as specified and directed.

Chromium plated health faucet 15 mm dia screwed down high pressure 1.8 mtr tube & hook Make-Jaguar, Code-ALD CHR 583.or other equivalent approved make fixed as in repair complite all as specified and directed.

Mortice lock vertical type , size 100 mm bright finished brass with four levers and pair of anodized (anodic coating 10 micron) as per IS-1868) aluminium lever handles with necessary screws etc fixed as in repair complete all as specified and as directed

Repair to rolling shutter exc (5 mtr height but n execeeding 7 mtr height) including repair gear box, rolling system of shutter, oliling and gressing making free movement of rolling shuttter complite all as specified and directed.

12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door complite all as specified and directed.

12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door fixed as in repair complite all as specified and directed.

Stone railing of approved design and pattern suitable for slant surfaces as in staircase containing 30-40cm wide, 10cm thick base stone fixed to levelled surface in 1:4 cement mortar after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement, making suitable size holes in base stone to receive railing posts(post girth upto 40cm) at 25-30 cm c/c, confined by top hand rail of same stone, hand rail to be fixed with large posts (newel) at top and bottom (landings) of girth upto 60cm and height upto 1.40m, intermediate posts of height (upto 1.0m) to be fixed between base stone and hand rail making all holes fix with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone fixed as in repair complete all as specified and directed.. Note:- (i) Measurement will be taken along sloped length for payment (ii) Rate includes base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Photo of required design enclosed as per sketch 3.

Stone railing having one side carving of approved design and pattern (Mehrav pattern) suitable for flat surfaces containing 30-40cm wide, 10cm thick base stone fixed to levelled surface in 1:4 cement mortar after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement , making suitable size holes in base stone to receive railing posts(post girth upto 40cm) at 0.9-1.2 m c/c, posts shall have cutting to inner sides to take stone railing of 7.5 cm thick and required length and height (upto 1.10m) making all holes fix with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone fixed as in repair complete all as specified and directed. Note:- (i) Measurement will be taken from bottom of base stone to bottom of newel cap and gross measurement with posts will be taken for all carving area. (ii) Rate includes base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Photo of required design enclosed as per sketch 01.

Stone railing having one side carving of approved design and pattern (Jali pattern) suitable for flat surfaces containing 30-40cm wide, 10cm thick base stone fixed to levelled surface in 1:4 cement mortar after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement, making suitable size holes in base stone to receive railing posts(post girth upto 40cm) at 0.9-1.2 m c/c, posts shall have cutting to inner sides to take stone railing of minimum 5.0 cm thick and required length and height (upto 0.8m) making all holes fix with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone fixed as in repair complete all as specified and directed. . Note:- (i) Measurement will be taken from bottom of base stone to bottom of newel cap and gross measurement with posts will be taken for all carving area. (ii) Rate includes base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Photo of required design enclosed as per sketch 02.

Excavation in trenches n.exc 1.5 m wide or n exc 10 sqm in plan area and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed .

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified.

Plan cement concrete (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete including demolition of existing complete all as specified and directed.

Plan cement concrete (1:2:4) type C-1 (using 20mm graded stone aggregate) as in coping of masonry wall, benching of manholes etc including weathering, slightly rounded or chamfered angles and throating, necessary formwork as required including demolition of existing complete all as specified and directed.

P:C:C 1:3:6 type C-2 using 40 mm graded stone aggregates as in beds of SGSW pipe 150 mm bore, laid to required slope including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge Note: - (i) Thickness of concrete bed below the barrel of pipe shall be 10cm. (ii) Pipe shall be measured & paid for separately. (iii) Width of concrete bed shall be equal to outer dia of drain pipes (not of sockets/collars) plus 30cm. (iv) The rate includes for all necessary shuttering and support to concrete and for laying beds to falls.

150mm bore reinforced concrete pipe, class NP2, laid and jointed with collars, laid and jointed on concrete bed complete including testing, after demolition and breaking up existing drain pipes set in cement mortar including bedding haunching complete all as specified & as directed.

Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:4) including demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Cleaning of septic tank of 200 users capacity by bailing out taking out sludge and removing the sludge by pump or other mechanical means to a distance exceeding 1.5 Km but not exceeding 2.00 Km from the camp area and including removing stone patti/RCC cover slab and refixing, cleaning frequency as per requirement, complete all as directed.

All as per item No. 97.00 here-in-before but 100 users complete all as specified and directed.

All as per item No. 97.00 here-in-before but 50 users complete all as specified and directed.

Cleaning of manhole of any capacity and depth by excavating sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed.

Cleaning of sewage line of any dia and depth by excavating sewage wet/dry soil in foul condition and removing the waste in covered vehicles outside MD land by taking all necessary precautions and including pumping out fluid, cleaning of sludge from manhole, placing the cover of manhole in position and removing the sludge in covered van/trolley out side the MD land, complete all as specified and directed.

Pre cast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in slab supported on walls for manholes, septic tanks etc and set in cement and sand mortar (1:6) including demolition of existing slab complete all as specified and directed

Mild steel TMT bars upto 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.and directed and directed

Removing of localised blockage by cleaning gully trap, floor / nahni trap, soil waste pipe, WC chocked, etc including first Manhole and removing sludge water / waste upto 50 mtr from distance and burring the same in pit complete and directed

S K TRADER

M/s Fateh Enterprises

AMBEY MAA CONSTRUCTION COMPANY