Restoration of rain damages of LWSS Logwalti Bomson in Tehsil Tauni Devi Distt. Hamirpur.

Dismantling roofing inculding ridges, hips, valleys, gutters etc. stacking the serviceable materials and within 20metes lead.within materials and within 20metes lead.within all leads. Gl sheet roofing.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden batterns ballies, height of propping and cent ring below supporting floor to ceiling not exceeding 4 mtr and removal of the same for in-sitú rëļnforced concrete and plain concrete work in:-

Flat surfaces such as soffits of suspended floor, roofs, landings and the like floors etc. up to 200mm thickness.

Edges of slab.

Beams

Providing and laying cement concrete 1:1.5:3(1cement: 1.5sand: 3graded stone agg. 20mmnominal size) and curing complete excluding the cost of form work and rein forcement for reinforcement work in.

Suspended floor, roofs, landings, shelves and their supports balconies, beams, girders breassumar and canti levers ets. In all leads and lifts

Providing Tor steel reinforcement for RCC work including bending,binding & placing in position complete upto floor two level complete in all leads & lifts & to the entire satisfaction of Engineer-in-Charge.

6mm Cement plaster 1:3(1 Cement:3 Sand) finished with a floating coat of neat cement and thick coat of limewash on top of wall when dry for bearing of R.C.C Slabs and beams

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including dumping ground within a Leaddisposal of rubbish to the of 20 metres with:-

20mm thick cement plaster in single coat of same side stone masonry for plastering up to floor two level including arises internal rounded angles chamfers or round angles not exceeding 80rnm in girth and finished and smooth in CM 1:3 (1cement:3sand) and to the entire satisfaction of the Engineer-in-charge.