Improvement/Upgradation of road from Chandak to Budha Amar Nath ,Mandi in Km 7th RD 200 to Km 11th RD 475 by way of balance Earth Work in Cutting, Cross Drainage, Walling , Providing and Laying of 150mm thick WBM Grade-II,75mm thick WBM Grade-III ,5

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas ( exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan ) including disposal of excavated earth, lead up to 50m and lift upto 1.5 m, as directed by Engineer-in-Charge. Classification of soil : All kinds of Soil 50% ,Ordinary Rock = 30% & Hard rock =20% ( Requiring Blasting)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of bottom lift upto 1.5m,including getting out excavate earth and disposal of surplus excavated earth as dirested: All kinds of soil .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering . All work up to plinth level with : 1:5:10 ( 1 cement :5 coarse sand :10 graded stone aggregate 40 mm nominal size ). including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering .All work up to plinth level with : 1:3:6 with ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) using 20% stones. including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Dumping stone including cost of stones. On Horizontal on level. including all leads /lifts ,carriage, handling and re-handaling ( Complete job)

Centring and shuttering including strutting propping etc. and removal of form for :-

Foundations,footings, bases of columns etc for mass concrete

Walls (any thickness) including attached pilasters,buttreses,plinth and string courses etc.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying non-pressure NP2 class ( light duty) 900 mm dia R.C.C H.P with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement :2 fine sand ) including testing of joints ,Cost of pipes etc complete job.

Providing and laying WBM-GR- II 150 mm thick with broken Nallah/Crusher stone aggregate of 63 to 45mm size including screening of 13.2 mm size and using good earth as binding material sorting, spreading to template and consolidation with Power Road Roller of 8-10 Tonne capacity including carriages, octroi, sale tax, service tax all leads/lifts , carriages of material upto , loading & unloading ( Complete job)

Providing and laying WBM-GR- III with broken Nallah /Crusher stone aggregate of 53 to 22.4mm size including screening of 11.2 mm size and usingcrusher dust as binding material sorting, spreading to template and consolidation with Power Road Roller of 8-10 Tonne capacity including carriages, octroi, sale tax, service tax all leads/lifts , carriages of material upto , loading & unloading ( Complete job)

Providing and laying bituminous macadam of 50mm average compacted thickness with bitumen of 80/100(VG-10) grade @ 3.5% (percentage by weight of total mix) on prepared surface with specified graded crushed stone aggregates for profile corrective base/binder course including loading of aggregate with F.E loader , hot mixing of stone aggregates in hot mix plant transporting the mixed material by tippers to paver and laying the mixed material with paver finisher fitte with electronic sensing device to the required level and grade and rolling with road rollers as per MORTH specifications and direction of Engineer-in-Charge to achieve the desire density and compaction including the cost of brooming , primer/tack coat , all leads/lifts , carriages , loading & unloading ( Complete job)

Providing,& laying open graded premix carpet of 25 mm average compacted thickness with bitumen of 80/100(VG-10) grade @ 5%(percentage by weight of total mix) on prepared surface with specified graded crushed stone aggregates for wearing course including loading of aggregate with F.E loader and hot mixing of bitumen with filler and stone aggregates in hot mix plant , transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the required level and grade and rolling with road rollers as per MORTH specifications and direction of Engineer-in-Charge to achieve the desire density and compaction including the cost of brooming , primer/tack coat applied on bituminous surface @0.75 kg/Sqm , all leads/lifts , carriages , loading & unloading ( Complete job)

Strenthening of shoulders/berms of the road by way of river bed/grandular material/mixed with earth , sand , stone agg. below 20 mm nominal size including sources to site of work,spreading & laying in layers not exceding 20 cm in depth,watering,rolling each layer with road roller/steel rammers complete in all respect.

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc.as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 16.67.1 Overhead informatory road signage.

Providing and Fixing of Mandatory/Regulatory Sign board (NSI)

Providing and Fixing of Cautionary/Warning Sign boards(NSI)

Speet Limit (NSI)

Right/Left Cure Signs (NSI)

RCC M-15 Grade Km stones as per IRC:8,fixing in position including painting & printing etc as per Drawing and Techanical Specification.

M/s Talib Hussain Chashti