PROVN OF GUARD ROOM WITH ATTACHED TOLET/BATHROOM WITH PARKING SHED AT MAIN GATE 16 RAJPUT UNDER GE (EAST) LUCKNOW

Note : Sch 'A' part II to part V are pre-priced by MES and the pre-priced rates are indicated under Col. 5. Total amount of Sch 'A' Part II (PARKING SHED)

Total amount of Sch 'A' Part III (Internal Water Supply )

Total amount of Sch 'A' Part IV (Internal Electrification)

Total amount of Sch 'A' Part V (SEWAGE DISPOSAL)

Sch 'A' Part - I (Building Works) and Part VI Note - These Schedules are not pre-priced by MES and the pre - priced rates indicated as "Rs 0.00 under col.5 siginifies this fact only. Conractor have to quote their own rates

Sch A Part I Building Works CONSTRUCTION OF GUARD ROOM WITH ATTACHED TOILET BATHROOM AS PER LGSF TECHNOLOGY COMPLETE ALL AS SPECIFIED AND AS PER APPROVED DRAWINGS.

SCh A Part VI MISCELEOUNEOUS ITEMS S&F MCB distribution board, VTPN, 4 way, powder coated CRCA steel sheet suitable for MCCB incomer 125 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with double door, wall mounted, having 250 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces wherever required comprising of the following:- Incoming: One number MCCB, 4 Pole, 63 A,, 415 V, 50 Hz, 16 KA (Icu=Ics), thermally adjustable between 70% to 100%. Outgoing: Twelve numbers MCB, SP, AC, 240V, 50 Hz, 10 KA, 32A, 'C' series ISI marked.

S&F 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16 amp as required.

S&F LED surface mounted Batten 20 watt, powder coated die cast / extruded aluminium Body (Thickness ≥ 1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50 Hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED Driver & electrical circuitary), of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

S&F LED surface mounted mirror light 10 watt, powder coated die cast / extruded aluminium Body (Thickness ≥ 1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50 Hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED Driver & electrical circuitary), of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. System lumen efficacy 120 lm/Watt output. LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

Supplying and fixing LED bulkhead fitting 9 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete

S&F Solar integral AIO street light with aluminium housing, with IP 65 & IK 08 protection, lithium / Life Po4 battery capacity min 20 Ah @ 3.2V or 20w 4.5V, PV panel power CRI >=70, system efficacy >165 lm/W, minimum lumen 4000 system wattage should not be more than 25W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. The fixture should have microwave motion sensor & sensor dealy time 18 seconds Life class of LED 50000 hrs including suitable size GI pipe medium grade bracket with clamps and fastner for fixing the lights as required.

S&F street light fitting 45W Pressure die cast aluminium housing with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66, IK-10 single piece die cast incl spigot, dia 48-76mm, LED life time (L70B50) 75k hrs with integrated optical cover. Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings, preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, including dimming profile for energy savings,drift not exceedind max 2mins/year, clock retention upto five yeras, auto switching off secondary power for module,dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminiarie incl driver and astro module, surge protection including suitable size of GI pipe medium grade bracket with clamps and fastner for fixing the lights as required.

Supply and fixing storage water heater (Geyser) vertical type of capacity 50 ltrs, 230 volts white in colour,working pressure min 0.8 Mpa with glass lined coated tank,magnesium anode,adjustable thermostat,enamel coated incology heating element 2KW,ABS Plastic body,Product warranty -2 years,Heating element warranty-4 years,inner tank warranty-7 years,including including four nos of full threaded fastener od size 100x10mm with 2 Nos washer incl water supply connection , testing after installation complete all as specified and directed by Engr-in-Charge.

S&F Ceiling fan 1200 mm sweep, BEE star rated 5 with brush less direct current (BLDC) motor, class of insulation: B, 3 Nos blades, up to 90 cm long down rod, canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value(CM/M/W) minimum 6.00, air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max), insulation resistance more than 2 mega ohm suitable for 230V, 50 Hz including remote complete all as specified.

S&F wall mounted fan with powder coated gaurds and blades of approved colour, AC single phase, 230 volts, 50 Hz, 1440 RPM, 400 mm sweep with adjustable vertical angles and three speeds controls mounted within easy reach of hands with necessary connecting cable recommended / provided by manufacturer complete.

S&F Fresh air fan of size 250 mm sweep PVC body complete with louvers connecting up including suitable size three core flexible copper cable from ceiling rose to fresh air fan as required.

S&F decorative wall mounted fancy light fitting made up of brass rubi lamp brand double handed item including of thred type bulb of 9-15 watts covered by glass complete all as specified.

M&L for Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 10 users. Ref CELZ TD/217

Soakage well exc in any type of soil, foundation in PCC 1:3:6 wells of honey combed bricks work in CM ,RCC Cover slab Filling with bricks bats, complete of size 1.80M dia X 3.00M deep Ref CELZ TD/576