WC-016/22-23 - 3 Nos 11 KV Bay Extension Works

Amount

Earthwork excavating, depositing on bank with an initial lead of 10 m and lift of 2 m in medium rock and dense medium rock not requiring blasting

PCC 1:3:6 using 40 mm HBS jelly including cost of all materials, lead, lift, etc., complete without form work.

PCC 1:2:4 using 20 mm HBS jelly including cost of all materials, lead, lift, etc., complete with form work.

Brick work with CM 1:6 using second class brick 9”*43/8”*23/4” including cost of all materials labour, lead, lift, curing etc; complete.

Plastering with CM 1:5, 12 mm thick including cost of all materials, lead, lift, curing etc., complete

Labour charges for painting the plinths Providing two coats of ready mixed Exterior Emulsion painting of approved colour & quality on outer walls over one coat of white cement primer,including cost of all materials, scaffolding charges, labours, lead, lift, etc. complete.- to be done by contractor)

Labour Charges for providing grouting pocket, placing the template for breaker foundation as per the drawing, grouting the foundation bolt as per the instruction of the site engineer including the cost of curing, T&Ps etc., complete

Labour for Erection of 33/22/11 KV breaker with own crane arrangement and connecting link rod, SF6 gas filling and other consumables including support poles cutting, jointing, providing holes and bending of pipes whereever required and as directed by the field engineer

Labour for erection of 11KV/33KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer.

Labour for erection of LAS station/Distribution type single unit including monitors & accessories.

Labour for erection of 33/22/11 KV Measurement Transformer using manual labour or crane own arrangement (one S Ph or 3 Ph unit ) including providing holes wherever required as directed by the field engineer.

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.

Labour for erection of Busbar including fabrication and any modification of end clamp wherever necessary and as directed by the field engineer. Using 50mm bus bar of length (without making bends)

Erection of Simplex Panel including alignment and earthing as directed by field engineer

Labour for laying of cable in duct/trunch including the cost of Alu.tag for identification.Upto 8 core

Labour machinery consumable for the fabrication for steel structuresHeavy section (above 14 kg/m)

Labour machinery consumable for the fabrication for steel structuresLight section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel StructuresHeavy section abovekg/m)

Labour for the Erection of the Fabricated Steel StructuresLight section(below14kg/m)

Labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike). As directed by the field engineer.

Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint of all Steel Sections as directed by the field engineer after proper surface preparation using appropriate machinery to remove rust/scales etc.

Labour, consumables fo the second Finish coat using Aluminium paint of all steel section as directed by the field Engineerrfirst primer coat using red oxide paint and first finish coat of painting using Aluminium paint of all steel section as directed by the field engineer

SUPPLY OF MATERIALS

Fabrication supply and fixing of CT /PT junction bos size 400X 300X150 mm of 16 SWG 1.6 mm MS Sheet with primer coat paint supply fabrication and erection of box fixing flats using 50X 8 MSF supply and fixing of 25 X mm2 braided flexiable copper loops to be earth two coat of enemal paint provision for fixing terminal block MCB including consumables VAT fright etc

2" Free end clamp

Switch end clamp for Zebra

Switch end clamp for Mink

Sypply of Gi bolt Nut(various size)

Supply of GI washer (various sixe)

Aluminium paint

Red oxide paint

Erection of UG Cable

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder