Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.9 L
EMD Value
₹3,716
Closing Date
13 Oct 2026, 4:00 pmDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Assistant Engineer, PWD
Chanchal Sub-Division Chanchal, Malda Pin-732123
Providing, Sinking and Development of Deep Tube Well with new Submersible Pump Set for the SDOs Quarter within the premises of Chanchal Circuit House at Chanchal Under the Malda Division, PWD During the year 2026-27.
2026_WBPWD_5076535_1
WBPWD/AECSD/MD/NIT_06/2026-27
Open Tender
CIVIL WORKS
Percentage
15 days
Chanchal
Please refer Tender documents.
5 documents required · 5 mandatory
₹3,716
Yes
6 Oct 2026
6 Oct 2026
27 Oct 2026
6 Oct 2026
13 Oct 2026
6 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.23.1.1) All types of soil.23.1.1.2) 300 mm dia. | 70 | Metre | 819.48 | ₹57,363.6 |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.23.3.1) 100 mm nominal size dia. | 12 | Metre | 778.44 | ₹9,341.28 |
| 2.1 | 23.3.2) 150 mm nominal size dia. | 30 | Metre | 918.48 | ₹27,554.4 |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.23.4.1) 100 mm nominal size dia | 24 | Metre | 794.94 | ₹19,078.56 |
| 4 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-charge | 2.26 | Cum | 1,781.09 | ₹4,025.26 |
| 5 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. | 1.59 | Cum | 1,781.09 | ₹2,831.93 |
| 6 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge | 16 | hr | 1,256.35 | ₹20,101.6 |
| 7 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of.23.13.1 100 mm dia | 1 | Each | 259.48 | ₹259.48 |
| 8 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.23.14.1) 100 mm clamp. | 1 | Each | 2,213.15 | ₹2,213.15 |
| 9 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).23.15.1) 100 mm dia. | 1 | Each | 306.95 | ₹306.95 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.18 MB
FORM2911.pdf
Tender Documents • 0.51 MB
BOQ_5170506.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .