REPAIR TO INTERNAL PERIODICAL SERVICES AND REPAIR TO JOINERY FLOORING PLUMBING INCL SANITARY FITTING OF OTM ACCN AT NARAINA IN AOR IN AGE BR I OF GE NORTH DELHI CANTT10

Amount

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L for applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30 mtr the spray machine, appliying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower including complete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7"/9" to make the surface free fro, dust ,loose paint etc. by skilled labour complete all as specified and directed.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30 mtr the spray machine, appliying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower including complete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.

M&L for preparation of old decorated wallsurfaces of any description and applying one coat of white cement wash paint surface complete all as specified and directed. Make:- Birla white/Asian paints/JK White

M&L for applying one coat of oil bound distemper on ceiling using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30 mtr the spray machine, appliying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower including complete removal of existing treatment by scrapping with sanding pad of 80 Grit having dia of 7"/9" to make the surface free fro, dust ,loose paint etc. by skilled labour complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white Cement wash paint complete all as specified and directed. Make:- Birla white/Asian paints/JK White

M&L for one coat of synthetic enamel paint (1st quality) on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or girth complete all as specified and directed. Make:- Asian paint/Berger/Shalimar/Nerolac

M&L for one coats of synthetic enamel paint (1st quality) on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or girth complete all as specified and directed. Make:- Asian paint/Berger/Shalimar/Nerolac

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L brick work with Burnt clay bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L 15mm thick in Ready Mix Plaster on brickwork or concrete surfaces of wall (External surface) finished even and smooth complete all as specified and directed. Make :- Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP

M&L 10mm thick in Ready Mix Plaster on concrete surfaces of ceiling finished even and smooth complete all as specified and directed. Make :- Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha

M&L 15mm thick in Ready Mix Plaster on brickwork or concrete surfaces of wall (Internal surface) finished even and smooth complete all as specified and directed Make :- Ultratech readiplast/ Birla Aerocon RMP/ACC Suraksha

M&L for prepartion of newly plastered surface of wall and applying average 2mm thick water proof putty @ 1 Kg per Sqm over the plastered wall prepare the surface even and smooth and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a maximum material hose length of 30 mtr the spray machine, appliying distemper should be able to spray in hard to reach areas and penatration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying three coat of white Cement wash complete all as specified and directed. Make:- Birla white/Asian paints/JK White

M&L for preparation of new decorated surfaces of any description and applying two coats of white cement wash paint on external wall surface complete all as specified and directed. Make:- Birla white/Asian paints/JK White

S&F in repairs 100mm bore HDPE pipes single socketed in any length with rubber ring joints, fixed to walls with clamps,Tee/Elbows/Socket/Bend etc including taking out/dismantling of old pipes complete all as specified and directed. Note:- The cost for jointing and jointing materials shall be deemed to be included in quoted rate against this item.

S&F in repairs for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed. Make : Gyproc/Diamond Ceiling/Armstrong

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws, complete all as specified and directed.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each, complete all as specified and directed.

S&F rolled section as in framing for door/vent/CB chowkhats and the like fixed with angle cleat and connecting plates incluidng welding 3 Nos MS butt hinges 100mm & 01 No 50mm complete all as specified and directed. Note:- Butt hinges shall be measured and paid for separately

M&L for factory made, 2nd class hard wood 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S&F 30mm WPC Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. Make: ALSTONE/RAJSHRI/ACON

S&F fiber glass reinforced plastic (FRP) Door Frames of cross section 90mm x 45mm having single reate of 32mm x 15mm to receive shutter of 30mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S stay shall be provided al the bottom to steady the frame, complete as specified by the manufacture and as per directions of Engineer-in-charge. Make : Fibreways or equivalent as approved by GE

S&F for factory made solid FRPdoor shutter, 30mm thick (style) Panneled shutter of required colour and approved brand supplying and fixing in the frame at site all as specified and directed by the Engineer in Charge. Make: Fibreways or equivalent as approved by GE

M&L for 18mm thick PVC Board for kitchen cabinet/ cupboard one sided decorative lamination and other side balancing white sheet consisiting of carcass 18 mm thick PVC sheet fixed approved adhesive and self tapping screws and 20 mm wide and 1 mm thick PVC edges bending to paste on edges of PVC furnitures with suitable adhesive including all fittings and fixtures like SS shutter handle 100 mm size , magnet catcher on each pair of shutters ,door lock (Godrej) on each pair of shutters, 4 nos each auto closing hinges openable at 0 degree for each pair of kitchen shutter, ball bearing runners 45mm telescopic chaneel (20 inch each pair ) full extension load capacity 50 kg, etc complete all as specified and directed. incl taking down old board. Make:- Rajshri/giza or equivalent as approved by GE.

S&Fin repairs steel windows with side hung shutter swith openable both glass and gauge shutters including pintel hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long and steel peg stay all as applicable, complete with glazing bars, glass/gauge, dovetailed or welded complete all as specified and directed. Note:- Glass/Gauge shall be measured and paid separately

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete in repairs, complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm cut to required size and fixed to wooden door/ steel window shutter with aluminium wire staples complete all as specified and directed.

S&F 250mm long designer stainless steel fancy type sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as specified and directe

S&F 100mm medium weight stainless steel butt hinges complete all as specified Make: Crown or equivalent as approved by GE.

S&F continuous Mild steel CP piano type hinges 30mm flap (when opened), bright finish or electrogalvanised complete all as specified and directed.

S&F 150mm size extruded designer stainless steel fancy type handles fabricated type anodised complete all as specified. Make:- Dorset or equivalent as approved by GE.

S&F designer stainless steel fancy type barrel tower bolt 200mm long extruded section all as specified.

S&F 150mm size extruded designer stainless steel fancy type handles fabricated type anodised complete all as specified.

S&F designer stainless steel fancy type barrel tower bolt 150 mm long extruded section all as specified

S&F rubber gasket for fixing glass pane complete all as specified and directed.

S&F glass panes of plain sheet glass 5.50mm thick of ordinary quality in square exc 0.50 sqm each pane complete all as specified and directed.

S&F 100mm medium weight stainless steel butt hinges complete all as specified Make: Crown or equivalent as approved by GE.

S&F in repairs fancy type drapery curtain rods Mild steel powder coated polished 25 mm dia including brackets/Knob, side stop complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint (1st quality) over a coat of primer all as directed and specified. Make:- Asian paint/Berger/Shalimar/Nerolac

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in fixing of hold fast complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified.

M&L vitrified ceramic tiles 10 mm thick square/rectangular dark shade)granite or marble texture polished, area of each tiles not exceeding 0.36 sqm, as in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed. Make :- Somany/Kajaria/Orient as approved by GE.

All as per the description of srl item No 49 but on vertical surface as in skirting ,including 10mm thick rendering in CM 1:3 even on fair faces of brick work complete all as specified and directed.

M&L for Non skid coloured ceramic tiles (square/rectengular) 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified. Make :Somany/Kajaria/Orient

M&L for 10mm thick rendering as backing coat on fair faces of brick /concrete surfaces in cement mortar 1:4 and rough finished on vertical surfaces complete all as specified and directed.

M&L for glazed coloured ceramic tiles as in dado/vertical surface 600mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed Make:- Somany/Kajaria/Orient

S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60mm x 44.45mm x 2mm, in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed.

S&F anodised aluminium alloy powder coated stantard hollow section for door including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats , rubber gasket screws, 2 Nos aluminium anodised handles (150mm) in each door etc and other accessories complete including taking down old door etc complete all as specified and directed .

S&F anodised aluminum alloy powder coated standerd hollow section for window two tracks including aluminum frame/ chowkhat with following specification including anodised aluminum snap beading, channels,5mm thick tinted glass, glazing clips joint cleats,rubber gassket etc and other accessories complete all as specified and directed. (a) Frame of section :- 83.50mm x 44.50mm x 1.60mm thickness. (b) sliding window section (channel):-40mm x 18mm of 1.20mm thickness with locking arrangemeny. Note:- (1) The rate also included the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed. (2) Minimum thickness of powder coating shall be 50 micron. (3) make for PVC sheet :- Sintex/Rajshree/Tata

S&F in repairs Vitreous China wash basin, white, flat back, pedestal pattern size 550x400mm including CP waste coupling 32mm size, PVC waste pipe 32mm bore, including one CP pillar tap 15mm bore,one brass stop valve 15mm bore and one PVC connection15mm size with PTMT nuts of length 450mm long including brackets complete all as specified and directed. Make:- Jaguar Cat Part No-FLS-WHT-801/CNL-WHT-301/Cera Cat Part No-S2040103/Hindware-Cat Part No-10099

Supply and fix in repairs vitreous china water closet Squatt Pattern ) " Orissa pattern " size 580 x 440 mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet including lime concrete complete all as specified and directed Make:- HINDWARE/ PARRYWARE / NEYCER/ CERA

S&F in repairs CP hand spray (health faucet with 1.5m long easy flexible tube in chrome finish and wall hook) complete all as specified and directed Make:- Jaguar Cat Part No-ALD-CHR-598/Cera Cat Part No-F-8030108/Hindware-Cat Part No-511685

S&F in repairs angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. Make:- Jaguar Cat Part No-OPP-CHR-15053PM/Cera Cat Part No-F- 2014201/Hindware-Cat Part No-F-280004CP

S&F in repairs angular concelled stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. Make:- Jaguar Cat Part No-OPP-CHR-15051PM/Cera Cat Part No-F- 2014200/Hindware-Cat Part No-F-280014CP

S&F in repairs fancy type chromium plated long body bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified. Make:- Jaguar Cat Part No-CON-CHR-107 KN/Cera Cat Part No-F2014153/Hindware Part No -F-740011CP

Dismantling water tanks and removing to store exc 250 & n.exc 500 ltrs of capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage triple layer tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage triple layer tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified and directed.

S&F in repairs 15mm bore PVC connection pipe of 450mm size with 2 Nos brass check nuts with washers complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 15mm bore pipe complete all as specified and directed.

Supplying and laying of CPVC pipe 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiedall as specified. Make: Prayag/Supreme/Plasto

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 20mm bore pipe complete all as specified and directed.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position (wall/floor/ ceilings etc ) of size 20mm bore complete all as specified and directed.

S&F in repairs snow white vitreous china EWC single peice type 700mm x 370mm x 645mm including seat cover and flush fittings complete fixed in floor with brass screw complete all as specified and directed. Make :- JAQUAR/CERA/Parryware/Johnson Pedder

Dismantling of stone slabs and tiles of any description or thickness in floors/wall, aprons etc., laid bedded and pointed in any mortar complete all as speicified.

M&L machine cut kota stone in flooring 20-25mm thick over and including 20mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and wax polishing unevenness at the meeting edges of slabs ,tiles shall be removed by fine chiselling ,grinding shall normally be commenced after 14 days of laying the slabs. except for skirting or small areas machine shall be used for the purpose .first grinding shall be done with with carbonation stones of 120 grit fitted in the machine ,water shall be properly used during grinding when the floor has been uniformly rubbed it shall be cleaned with water .final grinding shall be done when other works are finished the machine shall be fitted with carbonation of grit 220 to 350 using water in abundance .the floor shall then be washed clean with water .oxallic acid powder shall then be dusted at 33 grams per square meter on the surface and the surface rubbed with machine fitted complete and moulding at edge if reqd all as spd and directed. Note:- Payment shall be done only after Polishing & grinding to the entire satisfaction of Engineer-in-Charge and GE.

M&L for 20-25mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, complete all as specified. Note:- Payment shall be done only after Polishing & grinding to the entire satisfaction of Engineer-in-Charge and GE.

S&F prelaminated fire resistance PVC rigid foam sheet wall panelling of 5mm thick stick on inner frame of work of 35mm wide and 5mm thick rigid foam sheet. The strip should have a groove of 6mm width and 2mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300mm c/c. The PVC strips to be fixed to the all using 65mm long MS screw through the groove in the strip using PVC fasteners including necessary moulding wok on doors, windows, pillars and opening etc complete all as specified and directed. Note :- (a) Work for fixing of wall panelling shall be got executed through manufacturer's authorised appllicators only under the close supervision of their techanical staff. (b) The entire quantity of wall panelling and their ancillaries shall be procured directly from the manufacturer or their authorised dealer only” Make:- Rajshri/Echon/Ecocell

ANSH VANSH CONSTRUCTION COMPANY

M/S AADI ENTERPRISES

VDM GROUPS

VEDIT ENTERPRISES

Paradise Interior

S D Constructions