Restoring Piers and gates 8,9,10 and 11 at madhopur headworks damaged during flood season 2025 complete in all respects.

Structural steel work for Large Gates without Gearing Arrangements , Wheel assembly, Rubber Seals and Other Center Drive Units , but including cutting, Machining,Welding, Drilling , fixing, etc. with hoisting and erecting in position including cost of all machinery i.e hydra crane. Chain Pulley at site, lathe machine,Milling Machine etc. at manufacturing place complete in all respect. (FOR SKIN PLATE AREA > 10 SQM) i) Embedment- All STEEL omponents embedded in concrete including ISPL , Plate SS, ISMB, ISST, Anchor bolts, Support plates etc.

Structural steel work for Large Gates without Gearing Arrangements , Wheel assembly, Rubber Seals and Other Center Drive Units , but including cutting, Machining,Welding, Drilling , fixing, etc. with hoisting and erecting in position including cost of all machinery i.e hydra crane. Chain Pulley at site, lathe machine,Milling Machine etc. at manufacturing place complete in all respect. (FOR SKIN PLATE AREA > 10 SQM) ii)Gate Leaf- All STEEL components in movable gate leaf - ISPL, ISMC, ISMB, CLAMP PLATES, SEAL PLATES

Structural steel work for Large Gates without Gearing Arrangements , Wheel assembly, Rubber Seals and Other Center Drive Units , but including cutting, Machining,Welding, Drilling , fixing, etc. with hoisting and erecting in position including cost of all machinery i.e hydra crane. Chain Pulley at site, lathe machine,Milling Machine etc. at manufacturing place complete in all respect. (FOR SKIN PLATE AREA > 10 SQM) iii)Superstructure- All STEEL components in supporting structure for lifting the gates - ISPL, ISMB, ISMC, ISA , GUSSET, RIB PLATES, CHEQUERED PLATES, RAILING etc. BUT EXCLUDING LIFTING ARRANGEMENTS/ MACHINES

Machining & finishing of any part to desire shape and size complete in all respects to entire satisfaction of engineer in charge

Providing & fixing of Galvanised nut & bolts of all size and required length

Providing & fixing of stainless steel nut & bolts of all size and required length

Removing , damaged structure steel and stacking clear from working space by gas cutting, complete in all respects and to entire satisfaction of engineer in charge. As per site

Providing of teflon cladded bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of engineer in charge i) 127mm wide /44mm dia x 14mm

Providing & fixing in position of flat/ wedge seal including preparation of surface complete in all respects and to entire satisfaction of engineer in charge i) 90mm x 14mm

Providing & fixing in position of flat Rubber for splice joint i) 160mm x 3mm x 18648mm long

Commissioning & testing of gates at site complete in all respects and to entire satisfaction of engineer in charge

Removing, providing & fixing SS flat complete in all respects

Removal of rivets from plates/angles/I girders/channels/with blow torch including supply of LPG cylinder and oxygen cylinder completein all respects

Bearing Type Roller Wheel assembly for gate and gearing arrangement including cutting, Machining,Welding, Drilling , fixing, etc. with hoisting and erecting in position including cost of all machinery i.e hydra crane at site, lathe machine,Milling Machine or Hobbing Machine etc. at manufacturing place complete in all respect. b) 351 mm and Above (O/d) 400mm OD (CI gr 340 )roller with bearing 222319E skf make with stainless steel eccentric pin 104mm OD as per drawing

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Machining of Anchor Bolt to give shape complete in all respects and to entire satisfaction of Engineer-in-Charge

Structural steel work in angles, pipes, tees, girders, flats, etc. for gate and gearing arrangement on canal or drainage system including including cutting, fixing all gusset plates, welding, bolts, nuts, rivets etc. with hoisting and erecting in position at site including cost of all machinery and equipments required complete in all respect. for foot bridge

Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. (Depth 3 m )

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 With Batching Plant, Transit Mixer and Concrete Pump

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M35 With Batching Plant, Transit Mixer and Concrete Pump

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (RCC Grade M25) Height 5-10 mtr

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (RCC Grade M35) Height 5-10 mtr

Supplying, fitting and placing HYSD bar reinforcumcement in super-structure completeas per drawing and technical specifications.