Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹29.8 L+₹64,480 (2.21%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹30.6 L+₹1.4 L (4.76%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹31.0 L+₹1.8 L (6.15%)Rejected-Finance 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹31.5 L+₹2.3 L (7.99%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (East) Agra
Garrison Engineer (East) Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt-282001
MECHANISED APPLICATION OF FINISHES AND CERTAIN PERIODICAL SERVICES INCLUDING PLASTERING WORK AT MD ACCN OF OFFRS , JCOS, ORS CERTAIN PLACES OF AGE B/R-II UNDER GE (EAST) AGRA
2023_MES_610335_1
9576/E8
Open Tender
Civil Works
Item Rate
270 days
AGRA (UP)
Please refer tender documents
10 documents required · 10 mandatory
₹500
GE (East) Agra
₹60,000
Yes
29 Aug 2023
22 Jul 2023
26 Aug 2023
22 Jul 2023
19 Aug 2023
5 Aug 2023
Amount
Complete removal of existing treatment on wall/ roof projections including facia,cornices etc by scrapping, washing,rubbing down and stopping of distempered and painted surfaces make surface clean, free from dust,loose paint etc by skilled labour complete all as specified and directed.
M&L for waterproof cement based putty @ 1 Kg(undiluted) per Sq mtr.of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 Its per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted) 10 Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray Machine of paint application with a flow speed of min 1 litre per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
M&L for two coat water based premium acrylic smooth exterior emulsion of approved Colour with silicon additive & Colour stay Technology. Excellent Dit Pick up resistance With low VOC less than 50 gram/ lite as per the LEEDS specifications, Anti Algal. Properties in two coats @ 1.79 Iitre (undiluted)/ 10 Sqm diluted with water as per Manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 litre per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.
M & L for Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying putty in patches as required and applying one coat of cement base paint with fully automatic airless spray machine of paint application with a flow speed of min 1 litre per minute having a pressure including at any height (not.exc 11mtr )incl necessary scaffolding /Centreing etc complete all as specified and directed.
M& L for complete removal of existing treatment old plastered or unplastered surfaces including preparation surface of wall and applying two coats of cement base paint (snowcem) white or tinted over a coat of primer with fully automatic airless spray machine of paint application with a flow speed of min 1 litre per minute having a pressure including at any height ((not.exc 11mtr ) incl necessary scaffolding /Centreing etc complete all as specified and directed.
Note:- (a) For Item No 2.00 to 6.00 above :- (a) Memorandum of understanding (MOU) shall signed between lowest bidder and one of the manufacturer or his authorized dealer mentioned in the contract to execute the work and the same shall be submitted to Engineer-in-Charge before execution of work for approved of Garrison Engineer. (b) Cost of scafolding upto 11m hight of building is included in this item. (c) Masking of window/doors during spray painting using polythine film will be included. (d) Cleaning and clearing site of paint, mats etc. included.
M & L for applying one coat of Acrylic weather proof Exterior paint (Apex paint) on old plastered or unplastered surfaces of walls or concrete including preparation of surfaces at any height (not.exc 11mtr) complete all as specified and directed.
Preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamper complete all as specified and directed.
M & L for complete removal old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper including over a coat of 2 mm thick wall care putty complete all as specified and directed.
M& L preparing old surfaces and applying two coats of white wash on ceiling surface complete all as specified.
M&L Preparing old surfaces and applying one coat of white wash on ceiling surface completel all as specified.
M&L Preparing old plastered or unplastered surfaces and applying one coat of white wash on wall surfaces complete all as specified and as directed
M&L Preparing old plastered or unplastered surfaces and applying two coats of white wash on wall surfaces complete all as specified and as directed
M&L for preparation of old painted steel surfaces & applying one coat of synthetic enamel paint on steel surface of any description over 10 cm in width or girth complete all as specified and as directed.
All as per item No 15.00 above but two coats synthetic enamel paint.
M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
All as per item No 17.00 above but two coats synthetic enamel paint.
Note:- (a) For Item No 1.00 to 18.00 All the Materails to be Brought by Contractor and store in one place as per direction by Engr-in charge/GE., store will be issued to Contractor as per Site requirement for execution. (b) Every stage of painting to be passed by Engr-in charge before proceeding second coat/subsequent coat . (c) The empty containers/paint buckets are to be deposit at AGE B/R-II (East) store after incorporation of work.
Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
All as per item No 21.00 above but except bricks (Note :- Old bricks obtained from demolition and shall be reused after cleaning ).
Writing letters or figures ( Block, Roman, Italic or Indian) 10cm height complete all as specified and directed.
Writing Stops, commas, short lines, dashes, hyphens, brackets etc. complete all as specified and as directed.
Clearing of shrubs growth and trees on bldgs wall, chajja, and making good the damaged protion in CM 1:3 and match the existing surface complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as directed.
M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 2mm thcik wall interior wall care putty and a coat of primer complete all as specified and directed.
M&L for 15mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth and paid complete all incl water proofing compound all as specified and directed. (Note : WPC shall be measured seprately)
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer at any height (n.Exc 11m )incl necessary scaffolding /Centreing etc complete all as specified and directed.
Material and labour for Rendering 10 mm thick plastering in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.
Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.
Supply only intergral water proofing compound (Liquid),complete all as specified and directed.
M & L 12 mm average thickness of smart care ready mix plaster over brick or stone wall as well as concrete surfaces specially designed ready to use cemant based plaster with high quality polymer additives and well graded sand filler etc complete all as specified and directed. Make :
M & L for applying Asian paints smartcare repair polimer binder for concrete/mortar in repair like spalled concrete surfaces strongly with plaster or as a bond coat for a repair patch work complete all as specified and directed.
M & L interior waterproofing coating on plastered surfaces for water proofing for Mild seepage on walls, groung water rise, plaster level moiture and applying with Smart Care Hydriloc or approved equivalent as per manufacturer instructions complete all as specified and directed. Make : Super snowcem, Duracem plus, Acro Paints Ltd
M & L for single component polymer modified mortar Smart care repair mortar with compressive strength of 38 MPA at 28 days (ASTM C 109:99) and tensile strength of 2.5 Mpa (ASTM C 307) up to 25mm in a single coat and max thickness of 50mm @ 53 kg for 25mm thickness per sqm to plaster cracks, crack filling more than 3mm and plaster repairs as per manufacturer instructions complete all as specified and directed. Make :
VARDMAN ENTERPRISES
M/S OMKAR SINGH YADAV
Gupta Automobiles
M/S RADHEY GOVIND ENTERPRISES
deva engineers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .