Addition AND alteration in SHB PLC Room and PLC Battery room at 132kv SS Swaddi Kallan

Amount

CSR ITEMS

Earth work in excavation in fdns,trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge. CSR-6.6

Centring & shuttering for flat surfaces such as suspended floors, roofs landings etc. CSR- 9.8

CC 1:8:16 with 40mm gauge stone aggregate CSR10.6bii

PCC of Cement Concrete 1:6:12 with stone ballast CSR-10.7b

RCC M-20 with cement @375kg/cum machnicaly batch mixed using batch type concrete mixure but excluidiing steel reinforcment & shuttering in super structure. CSR-10.21

DPC 7.5 Cm thick of CC 1:2:4 with 2- coats of bitumen 20/30 penetration @1.65 kg/sqmtr laid hot & sanded CSR-10.27

DPC 4 Cm thick of CC 1:2:4 with 2- coats of bitumen 20/30 penetration @1.65 kg/sqmtr laid hot & sanded CSR-10.28

Ist class brick work in CM 1:5 in foun CSR -11.5

Ist class Brick work laid in 1:4 in foundation & plinth CSR-11.7

Ist class Brick work laid in 1:4 in 1st storey up to 4.00 mtr above plinth lavel i/c parapet for 4.50 mtr & 3.05 mtr slab CSR-11.8

Terracing consisting of tiles 27.86x11.43x3.83 Cm laid over 25mm mud plaster 7.5cm mud filling on another laver of 25 mm mud plaster i/c 2-coats of bitumen laid hot @ 1.65 kg/sqmtr on top of RCC slab i/c grouting with cement sand mortar 1:4 & top surface to be left clean after wire brushiing CSR-13.13

P&f upvc 100mm CI rain water pipe CSR-13.74

Embedding 110 dia upvc bend CSR-13.75 a

Top Khura 0.6 x 0.6 m for rain water pipe in 25mm CC 1:2:4 over 50 thk 1:8:16 CSR-13.45

Bottom Khura on ground 1.2m x 0.6m consisting of brick on edge in cement mortar 1:3 over 75 mm CC of 1:8:16 i/c 12.5 mm thk Cem plaster 1:3 CSR-13.51

CC gola 1:2:4 10 cm x 10 cm concave quardant along junction of roof with parapet finished smooth CSR-13.55

P/ Fixing false ceiling Providing & fixing 12.5 mm thick insulation perforated board (Such as celetex,Treetex etc) CSR -13.65

Base course of floor consisting of 100 mm th CC 1:8:16 & 100 mm thk sand filling CSR-14.3

40 mm thick Cong floor 1:2:4 Plinth CSR-14.7

Plinth protection CSR-14.6

Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand) CSR-14.13

P& Laying vitrified tile 600x600 premium quality complet as per specifications over 20 thk CM 1:4 for new floor laid with cement based high polymer modified quick set complete in all respect CSR-14.130

12.5 mm thick cement plaster 1:5 CSR-15.10

12.5 mm th cement plaster 1:4 inside the SH Building CSR- 15.9

20 mm thk. Cement plaster 1:6 inside the SH Building CSR-15.28

10 mm th. Cement plaster 1:3 under ceiling CSR-15.43

20 mm th. Vertical DPC of CP 1:3 with 2-coats of hot bitumen CSR-15.50 a

Bearing plaster of 10 mm rhk. CM 1:3 finished with a floating coat ot neat cement & thk Coat of Lime wash / POP on top of walls when dry for bearing of RCC Slab & Beams CSR-15.52

Finishing walls with acrylic smooth exterior paint of required shade with 2-coats applied @ 1.67 ltr/10 sqmtr over & incluiding base coat of water proofing cement paint applied @ 2.20 Kg / 10 sqm CSR-16.60

Wall painting with Plastic Emusion paint of approved brand & manufacture to give an even shade 2-coats CSR-16.64

Preparation of plastred surface or concrete surface for painting PE (incluiding sand papering the surface ) using ready mixed cement based wall putty by applying 2-coats to get required finish. CSR-16.66

Cost of aluminium fittings complete for doors/windows such as tower bolts,handles& screws etc. for these fittings ( excluiding sliding bolts) (i)For shutter area up to 0.5 Sqm CSR-17.23i

ii)For shutter area above 0.5 Sqm CSR-17.23ii

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete. I.S.I Designation No. III (size of door 851mm to 1000mm)CSR-17.43c

Providing and fixing aluminium work for doors,windows, ventilators & built up standard tubular sections & other sections 733 & IS 1285 of Jindal / equivalent make approved ny engg incharge fixed with rawl plugs & screws with fixing clips or with expansion hold fastners i/c necesasry fitting up to gap at junctions, top, bottom a7 sides reqiored PVC plugs Aluminiumsections shall be smooth rusat free straight & jointed mechanically complete as per architectural drawings & the directions of engineer incharge. Fixed portion for chowkats CSR-17.45a

Shutters of doors / windows/ cup Boards CSR-17.45 b

P&F 12 mm Prelaminatrd particular board flat pressed 3 layers or graded wood particular board conforming to IS 12823 in panneling fixed in al. doors with CP brass/stailess steel screws compl;ete as per drawing CSR-17.46ii

P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge CSR- 17.47 i

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge. CSR-17.48

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300mm x 16mm CSR-17.49 A

Cold steel twisted bar bending & binding complete in all respect as per Note XIV of chapter 10 CSR-18.18

P& F Wire gauge to aluminium chowkats with screws etc. , complete in all respect as directed by Engineer-in- charge. NS Items

P/F MS checqured plate 5mm thick NS Items

P/F steel nosing made of angle 30x30x3 mm with MS flat 15x4mm and 6mm dia bar NS Item

Earth filling under floors including compaction and watering (AOR)

P&F Cable rack 40x40x 5mm AOR

p&F MS gate as per specification NS item

Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size). CSR-34.02 bi

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. CSR- 34.02ii

Wiring 3 Pin 6 Amp. Plug control comprising wall socket and switch including bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade complete. CSR-34.02 iv

Wiring 3 pin 16/20 amp. power plug control and switch. CSR- 34.02 vi

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq.mm, 1100volts grade CSR-34.09ii

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade 34.09 iii

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade CSR-34.09 iv

Supply & erection of pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications 2010:- PVC conduit pipe 25mm dia. (ISI marked 1.60mm thick) CSR-34.12iii

Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply CSR-34.16 a i

Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 16 way each CSR-34.17 iii

Supplying and fixing concealed tube fitting with electronic chok & CFL blub of wipro make ( Model WCP 42118 G) of 1 X 18 W (TC-DE) NS Item

Supplying and fixing concealed tube fitting of 2 ' x 2' with electronic chok & CFL tubes of wipro make ( Model WCP 17236 SG) of 2 X 36 W (TC-L) CSR- NS

P & F ceiling fans standard make 1400mm sweep with regulator . Bajaj ,Crompton/G.E.C./ Philips/ GEC/Khaitan make. CSR- NS

Supplying and fixing exhaust fan 18” sweep of Crompton Make including louver ( MODEL T5JB1328EB) of 1x28 W T-5 NS Item

Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete. ii)15mm1/2”dia G.I. pipe CSR- 28.35 a

Providing, fixing and jointing Union Couplings in G.I. Pipe lines. i)1/2” dia (15mm) i/d pipe line CSR- 28.40 a

Cutting holes upto 23cm square thorugh B.B. in mud walls for pipes, and making goo/d including repointing, replastering and finishing according to existing finish where required through wall 22.86 cm thick CSR-28.56b

Extra for providing & fixing PVC 32 mm dia waste pipe up to floor level & plumbing joints CSR-30.20

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall 2.8 mm thick upto floor level including cost of wipped solder joint etc. complete as required by the Engineer in charge. CSR-30.42a

Providing and fixing in position best Indian make chromium plated brass, Bottle trap 32mm dia with 40 mm seal .CSR-30.44a

Providing and fixing in position best quality stainless steel sinks with complete fitting. Size 600 mm x 450 mm x 200 mm (Net size excluding flat edge) CSR-30.47

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge).CSR- 30.65 A i

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-incharge). CSR- 30.66c

PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut CSR- 30.72 c

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a inimum seal 50mm. With 75mm i/d outlet shallow seal CSR-30.79 b

Landing Rate including Extra carriage and Difference of rate of Crusher 13.2/12( AOR)

Landing Rate including Extra carriage and Difference of rate of Crusher 11.2/10( AOR)

Landing Rate including Extra carriage and Difference of rate of Stone Ballast ( AOR)

Landing Rate including Extra carriage and Difference of rate of Coarse Sand

Landing Rate including Extra carriage and difference of rates of bricks

Extra carriage of Fine Sand

Extra carriage of Cement

Extra carriage of STEEL

Notes: -

The rates are exclusive of GST. GST as applicable shall be paid extra.

These rates are thorugh rates but excluding cost of cement and steel as these shall be given free of cost by the department.

At the time of final billing,the merit position w.r.t actual work done shall be prepared again and if the merit position of L-1 contractor changes,his total payment shall be restricted to the revised L-1 cost and the final payment to the contractor shall be restricted to the revised minimum cost.

Works regulation (PSEB) shall be part of the tenders/DNIT

For any other item,Which is not covered shall be allowed on the same pattern as per A.O.R approved by the department

G.S.Construction Co.

INDO ENGINEERING WORKS